Air Monitoring Equipment

1892 Results found
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

Fast-Flo - Model 620S - Air Flow Sensor

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The FastFlo 620S an insertion thermal air flow sensor that contains FastFlo® Sensor Technology and Smart Electronics – was designed to give you a highly reliable, responsive and affordable mass flow meter for light industrial applications where a NEMA 4X (IP65) enclosure is acceptable.

HI-Q - Model AFC-Complete-Series - Digital Display with Selectable Options Air Flow Calibrator

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q's AFC-COMPLETE, digital air-flow calibrator, is 'the field technicians first choice' when it comes to air-flow calibration. This microprocessor based air-flow calibrator incorporates the use of a differential pressure sensor, a precision thermistor, an absolute barometric pressure sensor, and a precision machined venturi tube, to measure and ...

CAI - Model 600 CLD - Chemiluminescent NO/NOx Analyzer

by California Analytical Instruments, Inc. (CAI)     based in Orange, CALIFORNIA (USA)

The California Analytical Instruments Model 600 CLD NO/NOx digital analyzer is designed around a state-of-the-art 16-bit microprocessor. The 16 bit microprocessor control board consists of the MSR-Card with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operated from the keypad or ...

Environmental Sensors - Model Z-100 - Hand Held Ethylene Oxide Meter

by Environmental Sensors Company     based in Boca Raton, FLORIDA (USA)

Environmental Sensors Co.'s Ethylene Oxide Meter is a hand held instrument that measures ethylene oxide concentration in a range of 0-20 ppm and a resolution of 0.1ppm. The instrument makes it possible to monitor ethylele oxide vapor in air. The insturment has an LCD display giving concentrations in ppm, a low battery indicator, and an audible ...

Model PRO902C Modular - External Low Flow Dilution Probe

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

PRO902C Probe handles the toughest environments while offering significant advantages over typical in-stack dilution probes.The dilution extractive technology in combination with the thermo-electric cooler provides accurate and concise readings available in both terms of concentration and mass-emission rates. aturing an O2 fuel cell for oxygen ...


Boreal Laser - Model GasFinderFC - Portable In-Situ Monitor

by Boreal Laser Inc.     based in Edmonton, ALBERTA (CANADA)

GasFinderFC is a portable laser based gas detector that incorporates a fiber optic port to allow various measurement heads to be attached and swapped out. These heads can enable stack monitoring, short and long open path monitoring or local point measurements. Delivering a very flexible analyzer that can bring the advantages of laser based gas ...

Allergenco-D - Model 10-pack - Disposable IAQ Air Monitoring Cassettes

by Environmental Monitoring Systems, Inc     based in Charleston, SOUTH CAROLINA (USA)

The Allergenco-D (10-pack) disposable IAQ air sampling cassette was developed for the sampling and collection of aeroallergens and bioaerosols for quantitative analysis of mold spores, pollen, skin fragments, insects, combustion particles, toners, enivironmental dusts, construction dusts, and other airborne particulates. The Allergenco-D ...

IMR - Model 1440 FL/FLCO - Forklift Emissions

by IMR Environmental Equipment, Inc.     based in St. Petersburg, FLORIDA (USA)

Portable, continuous measuring flue gas analysis instrument housed in an aluminum case for measuring air temperature, flue gas temperature, Oxygen O2, Carbon monoxide CO (H2 comp.), Nitric oxide NO, losses, excess air, combustion efficiency, draft, Carbon dioxide CO2 and soot. Simultaneous display of eight measured parameters on the illuminated ...

Model SPX50 - Dust Sensor

by AR-SEFRAM     based in Templemars, FRANCE

blind type display adjustment with a pocket or a PC network version possible ATEX II 2/1 D homologation automatic inclusion of cleaning peaks  connection with our dedicated SFX+ controller and our SMX 100 filter management unit

Model VX1000 - Measurement & Calibration Hardware

by Vector CANtech, Inc.     based in Novi, MICHIGAN (USA)

The VX1000 System is a scalable solution with top performance for your measurement and calibration tasks. It can be used in the vehicle – both in the interior and in the engine compartment –, on test benches and in the laboratory.

Need help finding the right suppliers?

Let the XPRTs do the work for you