Air Conditioning Applications

14 Results found
Only show results available in Virginia?
OK
  • Category: Air & Climate ×

  • Subcategory: Air Conditioning ×

Noise monitoring for airport noise

by ACOEM     based in Limonest, FRANCE

Air traffic is the source of several forms of disturbance to the surrounding area, including, in particular, noise pollution. Local residents in the vicinity of an airport are the most severely affected and are very conscious of the aircrafts` flight paths and the impact on their day-to-day living conditions.

Prescribed Burning

by FTS     based in Victoria, BRITISH COLUMBIA (CANADA)

A general understanding of the separate and combined effects of several weather elements on fire behavior is needed to plan and execute a good prescribed burn. Because weather and fuel factors interact, an experienced prescribed burner can conduct a successful burn even with one or more factors slightly outside the desired range—as long as they are offset by other factors. Accurate fire weather monitoring of fire danger indices via the RAWS network, providing historical data leading up to a prescribed burn is critical in the planning stages. However, having accurate weather conditions in a micro-climate scale in real time during the execution of a prescribed burn is just as critical. The weather variables most applicable to prescription burns are air temperature, relative humidity, wind direction, wind speed and precipitation. A combination of wind speed, relative humidity, temperature, and solar insulation largely determines fuel condition which in turn affects fire behavior.

Panel Mounted OEM Pumps

by Verderflex Peristaltic Pumps - part of the Verder Group     based in Castleford, UNITED KINGDOM

A large selection of panel mounted pumps and pump heads for use in Original Equipment Manufacture (OEM). These pumps are custom engineered to integrate within your own equipment whenever accurate and repeatable dosing or liquid transfer is a must. Pumps can be supplied with a range of power options including both A.C or D.C. motors.

DOCUPAK LLC REDUCES COOLING TOWER CHEMICAL USAGE BY A THIRD

by Scalewatcher North America Inc.     based in Oxford, PENNSYLVANIA (USA)

Docupak LLC, a full service marketing company headquartered in Alabaster, Alabama, has reduced chemical usage by a third and removed all scale from its cooling tower at its plant after installing the patented, award-winning Scalewatcher computerized, electronic water-conditioner from Scalewatcher North America. In addition there are no longer signs of algae growth on the cooling tower louvres. Founded in 1998, Docupak, the operating name of Document and Packaging Brokers Inc., develops and distributes materials for businesses nationwide. In addition to its headquarters in Alabaster, Alabama, the company also operates a further plant in Alexandria, VA and has sales offices in Atlanta, Chicago, Cincinnati, Dallas, Los Angeles, Tampa and Washington, D.C. Aware that health agencies continually draw attention to the risks of limescale and algae in cooling towers and wanting to reduce the use of chemicals in the cooling tower, Plant Manager, Anthony Kinstley decided to install the Scalewatcher electornic water-conditioner through local dealer, Al Chatham of Water Processing and Well Supply in Harpersville, Alabama. An industrial Scalewatcher was installed on to the water-feed line to the building and then a further unit was specifically fitted on to the recirculation line of the cooling tower. “Since using the system the scaling on our cooling tower has been eliminated and we currently use only a third of the original chemicals intended for the water treatment within our system”, said Anthony Kinstley. Many air conditioning and refrigeration plant systems are water-cooled. The heat generated by cooling coils is removed by water, which is passed through a water-cooling tower. These are recirculating systems, which operate at temperatures ideal for bacterial and algae growth, and have plentiful supplies of nutrients. In cooling towers, temperature, water hardness, pH, scale and corrosion are all factors, which increase the chance of biofilms, algae and Legionella colonization. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “Scalewatcher has proven itself to be highly effective. I would highly recommend this product and service without limitation,” concluded Antony Kinstley. Scalewatcher models are based on continuous research and over 25 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and are shipped throughout North America.

Disinfection of air-conditioning systems

by Dimtech S.A     based in Keratsini, GREECE

The good condition of an air-conditioning system in terms of hygiene is a key element in maintaining at a high level the quality of indoor air. In this way an important factor in human health is ensured. The basic steps related to the hygiene of an air-conditioning installation are: Mechanical cleaning of vents. Chemical cleaning and disinfection.

Piping & ducting solutions for the HVAC industry

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The heating, ventilation, and air conditioning industry refers to the technology of indoor temperature control. A sub-discipline of mechanical engineering, HVAC systems are crucial in the design of residential as well as commercial structures. These systems control the temperature, and also the quality of the air that gets circulated, by replacing or exchanging the air in a particular space. Heating, cooling and ventilation systems require high-quality, precision-engineered parts, such as those manufactured by PROCO Products. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

Metallurgical

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC TurboSonic provides custom-designed atomizing technologies and air pollution control solutions for the non-ferrous metallurgical industry including Aluminum, Copper, Nickel, Zinc and precious metals producers. SoniCool™ Evaporative Gas Cooling & Conditioning controls high-temperature furnace and converter off-gases, lowering them to temperatures below other spray technologies—without wetting problems. By lowering the temperature and conditioning the gas stream, SoniCool™ protects downstream equipment from damage and improves the efficiency of downstream APC equipment, such as baghouses and electrostatic precipitators.

Cement

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC's extensive scrubber experience applies to the cement manufacturing process for the effective control of SO2 and HCl by the injection of lime slurry. Our customers can achieve up to 90% reduction of SO2 and 98% reduction of HCl using microfine or standard lime. The TurboSorb Spray Dryer Absorber (SDA) can often retrofit into an existing gas conditioning tower, or downcomer duct, to avoid the high cost of new capital equipment.

Emission control & air dedusting for calcination processes

by Advanced Cyclone Systems, S. A.     based in Porto, PORTUGAL

In calcination processes, solid intermediates and products are regularly handled in fine powder form. (ex: kaolin or metakaulin). There is a need to separate these very fine powders from the exhaust streams of calciners, fluid bed dryers or incinerators, often at critical temperature conditions 

Air sampling & monitoring systems for occupational health & safety industry

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these workplaces.

Air cleaning system for the K-12 education

by Dynamic Air Quality Solutions     based in Princeton, NEW JERSEY (USA)

The grades are in: a 2006 national report,Greening America’s Schools, concluded that environmentally friendly school buildings lead to lower operating costs, improved test scores, and enhanced student health. The report, produced by Capital E and co-sponsored by The American Institute of Architects (AIA), concluded that environmentally friendly schools save an average of $100,000 each year. The study examined 30 green schools built between 2001 and 2006, and determined that the total financial benefits of green schools are 20 times greater than their initial cost difference. Measurable benefits include energy and water savings, improved student health and higher test scores.

Air Conditioning Energy Saving Systems

by EnviroTech Limited     based in Masdar City, UNITED ARAB EMIRATES

Air Conditioning Energy Saver Systems, Made in England, UK saves up to 30% of Air Conditioning Energy Consumption and Electricity Bill Costs. The UK made Air Air Conditioning Energy Saver System is Ideal for the following Key Applications:- Government Buildings, Transport Terminals, Airports, Hotels, Villas and Houses, Offices, Leisure Facilities, Industrial Buildings, Clubs, Supermarkets, Restaurants, Retail, Shopping Malls, Labor Accommodation, The ETL AirCon Energy Saver System from EnviroTech (ETL) is “Manufactured in England” with distributors in: Abu Dhabi, Dubai, Sharjah, RAK, and Ajman throughout the U.A.E also in Oman, Kuwait, Egypt and Saudi Arabia will save between 20% to 30% of Air Conditioning kWh Energy Consumption and Electricity Costs by reducing the run times on the air conditioning unit compressor and increasing Energy Efficiency. This intelligent UK air conditioning energy saver system or air conditioning energy saver system will analyse the temperatures.

Emission control & air dedusting for steel and ferrous alloys

by Advanced Cyclone Systems, S. A.     based in Porto, PORTUGAL

teel and ferrous alloys production happens in industrial manufacturing processes which involve high temperature exhaust streams, often at more than 900 ºC. Typically, the gas flows into a gas conditioning tower to cool down to approximately 200 ºC, before entering into an ESP. These flue gases from steel or ferrous alloys kilns are also very maintenance demanding for bag filters and the very small size of the particles limit the use of usual dedusters such as regular cyclones and multicyclones as pre-separators. Bag filter failure is consequently a very common problem for clients in this industry. 

Client`s needs include a very robust dedusting system, either serving as end-stage collector avoiding the need to cool down flue gases, or strongly minimizing the loads of aggressive material to bag filters. 

Infrared sources for environmental sector

by Axetris Ag     based in Kaegiswil, SWITZERLAND

Axetris infrared sources are used in a variety of environmental applications: Heating, Ventilating and Air Conditioning (HVAC), Indoor Air Quality (IAQ) and VOC Monitoring, Air Quality Monitoring.

Need help finding the right suppliers?

Let the XPRTs do the work for you