Only show results in Virginia? Ok

Air Pollution Applications

  • Premium

    Coating and Laminating

    MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Power Generation

    MEGTEC is actively involved in providing Power Generation solutions for many applications ranging from utilizing process heat recovery systems to utilization with boilers, to recovering and utilizing Ventilation Air Methane (VAM) from coal mines. MEGTEC has developed VAM processing technologies for either abatement only and in combination with energy recovery and utilization. MEGTEC’s proven technologies are destroying methane while generating high quality carbon credits, electricity for coal mines and heating for local communities and facilities.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Odor Control

    We treat air streams to remove odors allowing industrial processes to be operated in compliance with local regulations and without causing a nuisance to neighbors due to odors and smells. Our technologies have been applied to a range of processes including: Waste treatment (municipal and industrial) Manufacture of flavors Food processing Waste water treatment (Municipal and industrial) Chemical manufacture Rendering

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Electronics

    In the fast-changing electronics industry with its need for new materials and products, demand for 100% uptime, smooth production operation, many in clean-room environments, MEGTEC meets and exceeds continuous demand for raising the bar of technology excellence. MEGTEC works either directly with the end user or through engineering firms or contractor companies, offering tested package systems as required and our end user list includes most of the well-known manufacturing companies around the globe including producers of ceramic condenser/capacitor, thin film FCCL, solar back film, plasma and LCD screen makers in Asia. We have the breadth of technologies in our portfolio and with our strong engineering design capabilities, collaborate from each of our global facilities and can review your application and recommend the best solution.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Air pollution control for the electronics and semiconductor industry

    Anguil customers in the Semiconductor and Electronics industries include chip manufacturers, printed circuit board makers, LCD (Liquid Crystal Display) manufacturers and probimer operations. Each of these processes have unique emission control challenges that all require a custom engineered system designed around the given process parameters. With Anguil`s product breadth our customers are ensured that the proper technology will be chosen.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the petroleum processing and petrochemical industries

    The petroleum processing and petrochemical industries place a large emphasis on engineering quality, safety and reliabiliy. With our extensive experience on various processes in these industries, Anguil is the perfect partner to meet these concerns.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Chemical and Pharmaceutical Solutions

    The application of VOC emission control equipment for the chemical and pharmaceutical industries requires a thorough knowledge and understanding of the customer's process and requirements, and having the ability to offer custom solutions. MEGTEC has years of experience in finding solutions to support the chemical industries worldwide. with our range of solutions including scrubbers and wet electrostatic precipitators, carbon adsorption systems for solvent recovery, distillation and purification equipment, and thermal oxidation systems.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Metallurgical

    MEGTEC TurboSonic provides custom-designed atomizing technologies and air pollution control solutions for the non-ferrous metallurgical industry including Aluminum, Copper, Nickel, Zinc and precious metals producers. SoniCool™ Evaporative Gas Cooling & Conditioning controls high-temperature furnace and converter off-gases, lowering them to temperatures below other spray technologies—without wetting problems. By lowering the temperature and conditioning the gas stream, SoniCool™ protects downstream equipment from damage and improves the efficiency of downstream APC equipment, such as baghouses and electrostatic precipitators.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Cement

    MEGTEC's extensive scrubber experience applies to the cement manufacturing process for the effective control of SO2 and HCl by the injection of lime slurry. Our customers can achieve up to 90% reduction of SO2 and 98% reduction of HCl using microfine or standard lime. The TurboSorb Spray Dryer Absorber (SDA) can often retrofit into an existing gas conditioning tower, or downcomer duct, to avoid the high cost of new capital equipment.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Automotive and Industrial Painting

    Reliability. Uptime. Uninterrupted Production - all are essential requirements in painting and finishing applications. Just-in-time manufacturing demands uninterrupted production and smooth pressure control that eliminates pressure fluctuations in the painting and finishing process. MEGTEC has supplied many systems to Tier 1 and Tier 2 automotive plants where high volume, low concentration exhaust streams are treated economically and effectively, yet adaptable to changing finishing formulations.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Ethanol and Biofuels

    Controlling the VOCs and CO emissions produced in the feed dryers (wet and dry milling), coupled with the particulate matter being introduced and the need for the reduction of NOx are just the start of having a successful abatement solution. The challenges of smooth pressure control that reduces dryer fluctuations and plug resistant media that lessen the frequency of bake-outs are also part of a successful abatement system and we have the solutions. Our engineered oxidation systems provide reliable performance with minimal maintenance requirements. Externally accessible valve bearings and other critical components are kept out of the corrosive moisture-laden streams extending the life of the equipment and facilitate maintenance intervals. Our simple oxidizer designs control your emissions with minimal facility intervention and allow us to provide you with reliable and dependable equipment.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Air pollution control for the metal decorating industry

    Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and developing at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon monoxide (CO), nitrogen oxides (NOx), particulate matter (PM) and hazardous air pollutants (HAPs), all regulated by environmental agencies.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the automotive industry

    Anguil`s engineering expertise has led to numerous successful air pollution control and emission control installations in the automotive manufacturing industry. From painting vehicles to engine test stations and tire manufacturing, we have supplied oxidizers and heat recovery systems to both tier 1 and tier 2 automotive plants.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the coating industry

    Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction strategies to reduce system size, meaning a reduction in both capital and operating costs. This can be achieved by recirculating the air in drying ovens or by cascading areas of lower VOC concentration to areas of higher VOC concentration.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Odor control for composite

    A Single Solution To Manage Composite Odors: Many resins used in the composite industry emit styrene vapors which are considered hazardous in high concentrations and whose odor is an unpleasant nuisance. This gas is categorized as a volatile organic compound (VOC) and listed by the United States Environmental Protection Agency (US EPA) as a Hazardous Air Pollutant (HAP). Styrene is considered highly reactive in the atmosphere and may contribute to smog formation and the production of secondary air pollutants.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you