- Home
- Applications
- air climate
Refine by
Air Climate Product Applications For The Glassware Industry
20 applications found
Premium
Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. ...
ByIMR Environmental Equipment, Inc. based in Saint Petersburg, FLORIDA (USA)
Premium
ByENVEA based in Poissy, FRANCE
Premium
The high temperatures in glass manufacturing can make it difficult to monitor gas concentrations for process control and emissions monitoring. However, OPSIS offers monitoring systems that handle the high temperatures in an excellent way. ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Glass fiber and mineral wool insulation production. Fibreglass is made from melted glass spun at high speed to create fibres. Rockwool (also called mineral wool) is created in the same way, using melted rock. Both have excellent insulation ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Flat glass (float glass) manufacturing. Flat glass is manufactured by allowing it to solidify on a layer of higher-density liquid, usually molten tin. This process is used to create clear, tinted and coated ...
ByLAND® based in Dronfield, UNITED KINGDOM
Glass and ceramic furnaces are typically associated with emissions of very fine particles (less than 5µm) in combination with high temperatures and load. An increasingly higher number of furnaces are powered with biomass fuel, further raising the level of particulate emissions that need to be treated, in order to comply with stricter regulatory limits. Solving this problem may or not require a two stage dedusting system such a cyclone pre-separation system followed by an ESP. Client's needs ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Removal of particulate, acid gases and NOx emissions from glass furnaces. Particulate control on glass and ceramic material dryers and ...
ByBionomic Industries Inc based in Mahwah, NEW JERSEY (USA)
Silicate fumes and acid gases can occur in the production of various glasses. Acid gas scrubbers are extremely effective in controlling these ...
ByCR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA)
Removal of urea and phenol formaldehyde resin and fibers from sizing dye operations, particulate and blue haze emissions from fiberglass mat ovens. Removal of styrene emissions from fiberglass composite manufacturing ...
ByBionomic Industries Inc based in Mahwah, NEW JERSEY (USA)
Energy savings solutions in glass industry with VPInstruments. In a glass packaging plant, a VPVision system with over 20 compressed air flow meters keeps an eye on compressor efficiency and ...
ByVPInstruments based in Delft, NETHERLANDS
Various industrial processes create exposure to Ultra fine particles. In case of engineered nanomaterials this is explicit. However, some processes create high exposure rates without EMN being involved. In this study, carried out by ArboNet (Dutch EHS organisation) in cooperation with software partner PIMEX the production of LCD screens with coatings based on nano-size particles was investigated. NanoTracers were used for personal mobile measurement as well as background sensing. Reference sensor was a SMPS. It ...
ByOxility BV based in Breda, NETHERLANDS
To handle fibreglass and other composite dust, you need a vacuum with strong suction power, filters that don’t clog and easy way of disposing of the collected dust. Dirt Eater is heavy duty cyclonic industrial vacuums for fibreglass and other composite dust. Dirt Eater has strong suction power, a not clogging multi sock prefilters and uses a plastic bag to collect the dust. Dirt Eater is the perfect answer for fibreglass waste ...
ByIndustrial Vacuums & Engineering based in Toongabbie, AUSTRALIA
Mass flow meters and controllers are important tools in a broad range of catalyst research from measuring the flow through carbon nanotubes to modeling high-pressure, high-temperature catalyst ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Accurate and repeatable mass flow control is vital in manufacturing expensive specialty gas such as headlights, windshields and perfume bottles. The fuel-to-air ratio controls the glass temperature, so precise gas control is paramount for quality in our mass flow controllers and ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Eliminating blockages and concretions in storage units and gas lines and flue gas treatment, loading and batch preparation. Our air cannon solutions are used to remove blockages and concretions in storage units and gas lines and to treat flue gases, loading and batch ...
ByStandard Industrie based in Roubaix Cedex 1, FRANCE
ByProVent, LLC based in Harbor Springs, MICHIGAN (USA)
Oxygen is used during a furnace campaign to increase throughput, at the end of a furnace campaign to extend the useful life and reduce total emissions, and for new furnaces maximize throughput return on investment (ROI). In all cases, energy use, NOx and particulate emissions are reduced. Every type of glass, from beer bottles to sophisticated computer flat glass, has seen extraordinary quality benefits with the increased use of VPSA oxygen.For fiberglass and mineral wool smelter production, all the same economic ...
ByAdsorptech based in Middlesex, NEW JERSEY (USA)
Glass is produced in glass melting tanks. High energy costs and the formation of large quantities of nitrogen oxides are a major production problem. One reason for this is the use of air to heat the melting ...
ByInmatec GaseTechnologie GmbH & Co. KG based in Herrsching, GERMANY
The installation of suitable installation material in buildings is a cost effective way to reduce energy costs. The manufacture of insulation from minerals or mineral products, such as glass. Recycling glass to form insulation materials is another way to keep the process ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Purification plants and collection of dust-combustion fumes from blast furnaces and compound preparation. In this sector our company has already installed and is operating various plants all over the world, with excellent results. The fumes extracted at 850° C from the various blast furnace chimneys are initially cooled then conveyed through a main collector to an multi-tube exchanger, and consequently to a dry sleeve filter (single or separate cell). The entire system is kept compressed by a centrifugal fan ...
ByCORME s.r.l. based in Sovigliana - Vinci, ITALY