Only show results available in Virginia? Ok

Carbon Dioxide / Monoxide Applications

  • Soil and groundwater protection in the petroleum industry

    Bristar Containment Industries has been serving Environmental Protection in the Upstream Petroleum Industry for 15 years. Prevention of soil and groundwater damage is preferred to clean up after the fact.

    By Bristar Containment Industries Ltd. based in Wimborne, ALBERTA (CANADA).

  • GIS software for petroleum industry

    For years, petroleum companies have used Esri`s GIS to decide where to drill a well, route a pipeline, build a refinery, and reclaim a site. Today`s GIS provides oil and gas industry solutions throughout the petroleum life cycle. All major oil companies in the world use Esri`s GIS technology to manage their location-based information, from leases, wells, and pipelines to environmental sites, facilities, and retail outlets.

    By Esri based in Redlands, CALIFORNIA (USA).

  • Hydrocarbons monitoring

    Hydrocarbons are a family of organic chemicals consisting of carbon and hydrogen atoms arranged in a variety of ways. Hydrocarbons are found naturally in crude oil and are released into the environment with its combustion (power plants, home heaters etc).

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • NDIR Carbon Dioxide (CO2) Monitoring

    Carbon dioxide has a wide range of commercial uses, from the production of lasers to the carbonation of soft drinks. This gas has become a topic of interest because it is classified among the greenhouse gases, gases which impact the Earth's environment when they reach high concentrations in the atmosphere. We propose solutions for medical diagnostics (out-breath control) and for ecological monitoring (control of carbon dioxide, exhaust gases in the atmosphere).

    By LED Microsensor NT based in Saint-Petersburg, RUSSIA.

  • Mobile Sewage Treatment for the Oil and Gas Industry

    Due to the continued growth in the oil & gas industry, we are seeing an increased demand for mobile sewage treatment solutions for oil exploration and drilling rigs in remote locations.

    By Nomadic Systems based in Langley, BRITISH COLUMBIA (CANADA).

  • Water and wastewater valve solutions for oil and gas industry

    Oil and Gas industry includes exploration, extraction, refining, transporting, and marketing petroleum products. The largest volume products of the oil and gas industry are fuel oil and gasoline. The industry is usually divided into three major components: upstream, midstream and downstream. Xinhai valves meet oil & gas industry upstream, midstream, downstream demands of reliability, corrosion resistance, temperature, pressure, vibration, etc.

    By China Xinhai Valve Manufacturer Company based in Wenzhou, CHINA.

  • Innovative Pump Technology for Oil and Gas Industry

    Medium-specific solutions, equipped with oil and gas tested materials and components, dimensioned for each application. Our engineers have the task of finding an energy-efficient, safe and powerful EDUR solution for this.

  • Carbon Monoxide (CO) monitoring

    Carbon monoxide poisoning is the most common type of fatal poisoning in many industrialized countries. Carbon monoxide is a colourless, odorless and tasteless gas caused by the incomplete combustion of hydrocarbon fuels. Carbon monoxide is a toxic gas to the human body, when inhaled it binds to hemoglobin, myoglobin, and mitochondrial cytochrome oxidase reducing oxygen storage, transport and respiration in these organelles.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Measurement solution for Perflurocarbon (PFC) emissions from aluminium industry

    The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale cell.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Gas monitoring for the manufacturing industry

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Premium

    Carbon capture and storage (CCS) applications

    Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of both nitrogen and sulfur (NOx and SOx). Next the purified gas is passed through an absorption column filled with the chemical scrubbing solvent. The solvent reacts with the carbon dioxide and selectively absorbs it from the gas stream. When CO2-rich solvent is heated, the carbon dioxide is released as a nearly pure gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Infrared Sources for Capnography

    Capnography is the monitoring of the concentration or partial pressure of carbon dioxide (CO2) in the respiratory gases. The CO2 concentration during a single breath is measured in a high temporal resolution to monitor the condition of the lungs.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Sustainable solutions for oil & gas industry

    Protecting Earth’s environment is becoming increasingly difficult as the development of emerging economies and industrial growth continue to accelerate and draw more demand for energy resources. At the same time increased legislation, consumer preference for greener energy and competition increasingly drive the need for more sustainable extraction, processing, transport and use of conventional energy resources. None more so is this true than for the Oil and Gas producers who must now develop strategies and practices to enhance their sustainability performance, economic position and social standing.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    High quality gas sensor solutions for process control

    Gas monitors controlling heat treatment of metals. Endothermic gas is a mixture of carbon monoxide, carbon dioxide, methane and other gases that is required for hardening or carburising of steel. By carefully controlling the amounts of each gas and the temperature in the treatment furnace, the steel surface can be hardened to provide long lasting components such as gears and tools.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Carbon footprinting calculations for environmental management

    With its expertise in calculating and managing emissions data, CERC offers a range of services to assess greenhouse gas emissions, from determining the carbon footprint of a single industrial process, to compiling a greenhouse gas inventory for a whole geographical area.

    CERC uses methods and emission factors laid out by the Intergovernmental Panel on Climate Change (IPCC). Emissions from transport, industrial, heating and agricultural activities are calculated and stored using the EMIT software package.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Environmental compliance for the energy industry

    RegScan has developed an extensive array of unique online compliance solutions for the energy sector. Whether you`re an upstream, midstream or downstream oil and/or gas producer, we`ve got you covered. The RegScan One system is also ideal for utility companies as well as other mining operations.

    By RegScan, Inc. based in Williamsport, PENNSYLVANIA (USA).

  • Premium

    Carbon Monoxide and Carbon Dioxide Sensing for Gasification

    Application: Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide and Hydrogen, which amount for around 85% of Syngas, and it is produced by a process called Gasification.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you