- Home
- Applications
Refine by
Environmental Product Applications For The Air And Climate Industry
209 applications found
Premium
Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than ...
ByAnguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA)
Premium
Your work matters. We help you see it clearly. You are leading the charge—designing carbon capture systems, managing emissions, and building a low-carbon ...
ByLiORA based in Saskatoon, SASKATCHEWAN (CANADA)
Premium
The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
Chromatotec can propose for hazardous areas (for instance refineries) specific boxes for our analysers : category 1 IIc T4 for ...
ByChromatotec based in Saint-André de Cubzac, FRANCE
Premium
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
Air Liquide, Praxair, Air Products, BOC, Messer, Linde, Takachiho, Aga, etc. need to control the amount of impurities before delivery to customer in petrochemical or chemical ...
ByChromatotec based in Saint-André de Cubzac, FRANCE
Premium
Brentwood engineers reliable cooling tower components, including film fill media and drift eliminators, designed to provide long-lasting performance in industrial and commercial applications. Expertly engineered cooling tower components and solutions built on a foundation of comprehensive polymer knowledge, diverse worldwide manufacturing, and superior customer ...
ByBrentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA)
Premium
The aim: analysis of H2S ppb and mercaptans with the TRSMEDOR because of the bad smell of ...
ByChromatotec based in Saint-André de Cubzac, FRANCE
Premium
Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
It deals with the quality control according to the following conrol: 4.0 (99.99 %). We can propose this application with the analyser ...
ByChromatotec based in Saint-André de Cubzac, FRANCE
Premium
The energyMEDOR ppb allows the end user to observe the speciation of each component of the Sulphur present in natural gas, or for quality control of disulphuric gas (ppb) after ...
ByChromatotec based in Saint-André de Cubzac, FRANCE
Premium
Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
The Tekran 2600 versatility is evident with the economical and convenient configuration for manual analysis of air samples collected on gold cartridges. Converting the instrument allows calibration by simple injection of gaseous Hg using the Tekran 2505. Once analyzed, the gold cartridges are immediately ready for ...
ByTekran Instruments Corporation based in Toronto, ONTARIO (CANADA)
Premium
Introduction: Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitative determination of mercury in various environments is one of the most important environmental monitoring problems. The use of a mercury analyzer RA-915M/Light-915M2 with Zeeman background correction provides direct real-time continuous determination of mercury in air from 0.5 ng/m3 within the overall possible range of mercury concentration in ambient ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Gas analysis in brick manufacturing: Process control and emissions monitoring at brick plants can be challenging due to high concentrations of hydrogen fluoride (HF) and dust. The use of extractive monitoring systems in such environments requires a lot of maintenance and can still cause major operational disruptions. However, the contactless technology offered by OPSIS solves the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Metal forging processes (heat and hammer operations). Forging involves applying pressure to a metal to provide a denser grain structure and increased strength. The temperature of the metal must be accurately measured to ensure product ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
OWI-430 DSP-WIVISTM Present Weather and Visibility Sensor Combines present weather identification, precipitation measurement and visibility into a single rugged package. • Outstanding performance yet low cost • DSP based – no field calibration required • Advanced scintillation technology • Intelligent algorithms based on over 800 million hours of OSi sensor field data • Rugged design – field proven from tropical to sub-arctic environments • Easy Installation and integration • Long-term reliability – designed for ...
ByOptical Scientific Inc. (OSi) based in Gaithersburg, MARYLAND (USA)
Premium
Industrial gases include all companies which manufacture atmospheric Gases, specific gases, semi-conductor gases and supply them to end users in different ways: on-site, cylinders, tanks to be used in lot of industrial manufacturing ...
ByTeledyne Gas and Flame Detection based in Arras Cedex, FRANCE