Environmental Industry Applications for Paint industry

Premium

Air Pollution Control Solution for Paint Spray Industry

Spray booths in automotive, golf ball, and parts applications generally require particle control from over-spray as well as VOC control. Wet scrubbers are effective in controlling the droplets and protecting the down-stream thermal oxidizers from fouling with the non-combustible inorganic ...

By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

Premium

Peristaltic pump solutions for paints and pigments industry

Peristaltic pump solutions for paints and pigments ...

By Randolph Austin Company based in Manchaca, TEXAS (USA).

Premium

Abrasive Blasting: Lead Paint Abatement

Lead paint abatement is the process of abrasive blasting lead paint and encapsulating the lead particles rendering them non-hazardous. Blastox® has been used to successfully stabilize over 150,000,000 square feet of lead based paint. This success is owed to the One Step application of Blastox®. Since its available pre-blended with various media throughout North America, it is ready for application once the blended media reach your job-site for lead paint ...

By The TDJ Group, Inc based in Barrington, ILLINOIS (USA).

Premium

Air pollution control for the paint & painted products industry

Anguil’s engineering expertise and flexible solutions guarantee destruction efficiency and optimized performance so your plant can focus on producing quality painted ...

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Paint shop cleaning

Problem: Build-up on grates, skids, hooks, and carriers reduces paint shop efficiency and often leads to a below-quality finish. Chemical stripping and incineration are effective, but are hard on operating personnel and expose them to ...

By NLB Corp. based in Wixom, MICHIGAN (USA).

Industrial peristaltic pumps for Paint industry

Albin pumps are a better solution compared to screw pumps for feeding emulsions to the dissolvers and to the finishing tanks. When a screw pump is run dry, the mechanical sealing, stator and rotor assembly will be often damaged. The binders in the Latex emulsions become very hard if they are in contact with air. As the mechanical seal wears, it starts to leak and create maintenance and environmental problems to the process. With Albin pumps only the hose is in contact with the emulsion. This isolates the pumped ...

By Albin Pump - a brand of Ingersoll Rand based in Montelimar, FRANCE.

Calcite for Dye

Paint industry uses dry ground calcite in the dimensions of 1,3,5,20,40 microns. The most demanded product group is 5 micron calcite. Calcite is added to the paint at the ratio of 25-35% in water based construction paints used in interior and exterior coating. Calcite, which is used as an extender in paint, provides surface coating and reduces titanium dioxide consumption. Due to the price increase in chemicals in the paint sector, the demand for economic paints in the market has increased. The consumption of ...

By Asoline Kimya İç ve Dış Tic. Ltd. Şti. based in Bayraklı, TURKEY.

Cellulose Powders for Paints

With its fine network structure Celova is able to trap the pigments and evenly distribute them in the suspension. In water-based paints microfibrillated cellulose can thus be used to prevent sedimentation, distribution and yield of pigments. Additionally, the thixotropic (shear thinning) characteristic of Celova makes it ideal as a rheology modifier without reducing spray- or ...

By Weidmann Electrical Technology AG based in Rapperswil SG, SWITZERLAND.

Air pollution control for the paint & paint spray industry

Companies applying a solvent-based paint or coating – commonly use regenerative thermal oxidizers (RTO) for air pollution control ...

By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

Solvent Recovery Solutions for the Paint Industry

Solvent Recovery Solutions for the Paint Manufacturing and Coating ...

By International Surface Technologies (IST) based in Saint-Eustache, QUEBEC (CANADA).

Container solutions for chemical, coatings & paint industries

Chemical Industry: The chemical industry demands dependable products that stand up to the harshest solvents and chemicals. Hoover Ferguson has consistently provided our customers with the finest of intermediate bulk containers (IBC) that meet specific requirements for durability and ...

By OEG Offshore based in Kintore, UNITED KINGDOM.

Precision moisture analysis instruments for rapid solids analysis for paints and coatings

Safely analyze solvent- and non-solvent-based coatings. Your customers rely on your paints and coatings to keep their assets safe from their environments. You can rely on Computrac® to provide accurate, reliable readings in minutes on solids and ash content for your products. Computrac Moisture, Solids and Ash analyzers can be used in ASTM method D7323-06, and can be correlated to other test methods, including D2369, and D5095. Further, Computrac® is the ONLY rapid loss-on-drying analyzer with Nitrogen ...

By AMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA).

Analytical spectrometric instruments for coating thickness analysis

Measurement of metal coating such as galvanized zinc over steel is an important task for quality and price control in various industries, such metals industry, electronics, and jewelry. Critical requirement to analysis method is indestructibility. We provide non-destructive, fast and accurate coating thickness measurement without any calibration. Just “out of the box” you can measure coatings of any metal at any ...

By Elvatech Ltd based in Kyiv, UKRAINE.

Analytical spectrometric instruments for lead in paint analysis

Lead is a toxic and harmful element. Lead can affect the central nervous system. One of the main sources of lead exposure to children is lead, contained in paints. In some cases, lead paint is used in kids equipment on playgrounds. Even more dangerous is the presence of lead in paints, with covers toys or Christmas decorations. Therefore the analysis of painted surfaces and paints itself is an urgent operation for the industry. The X-ray fluorescence analysis method is most convenient for determining the lead ...

By Elvatech Ltd based in Kyiv, UKRAINE.

Hazardous waste recycling solutions for painting industry

The manufacture of paints involves industrial tools such as pipes, tanks, mixers, pumps, etc. Between two types of paint fabrication, these tools are cleaned with solvents. The use of these paints requires tools such as spray paint guns, vats, etc. These tools should also be cleaned with solvents when changing paint or during extended shutdowns. These solvents can be continuously recycled on-site thanks to Eco-Dec ...

By Eco-Dec based in Battice - Belgique, BELGIUM.

Evaporators and concentrators for painting

Wastewater from painting booths, pre-washing waste stream, washing ...

By Eco-Techno SRL. based in Busnago MB, ITALY.

Waste Streams Processing for the Paint Manufacturing Industry

By Solids Control Services (SCS) based in Westhill, UNITED KINGDOM.

Specialty Minerals for Paints & Coatings

Paints and coatings need to meet high performance standards in terms of weather or corrosion resistance. Aesthetics and preserving a healthy living environment are also of prime importance. Our Paints and Coatings specialists harness the optical, mechanical, and rheological properties of our unique mineral portfolio to provide architectural and industrial coatings producers with high-performance, multi-functional extenders and fillers for use in water borne, solvent borne and powder paints and ...

By Imerys based in Paris, FRANCE.

VOC Abatement for Paint Finishing, Paint Manufacturing and Coating Operations

Munters designs abatement systems to meet the indivual needs of our customers. Our experience allows Munters to design optimal solutions for any application including automotive paint finishing, aerospace paint finishing and coating ...

By Munters based in Amesbury, MASSACHUSETTS (USA).

Nano-analytical microscope systems solutions for archaeology & the arts sector

In archeological research, various specimens such as paintings, mummies, antique objects or fabrics are regularly investigated. Those samples are often unique and require specialized treatment when being analyzed. WITec imaging systems enable comprehensive sample analysis that provides a thorough understanding of the physical and chemical properties of archaeological samples. Confocal Raman imaging for example is a flexible, non-invasive and non-destructive tool for the chemical and molecular characterization of ...

By WITec GmbH based in Ulm, GERMANY.