Only show results in Connecticut? Ok

Applications

  • Premium

    Machineries for tire shredding & recycling

    The scrap tire processing industry is growing rapidly as the number of discarded tires increases, landfill capacity diminishes and environmental pressures mount. The development of end-use markets which consume scrap tires, including recycling, tire derived fuel (TDF), and tire derived aggregate (TDA) are being pursued by industry, the private sector and government. Shred-Tech® has responded to this growing demand for new technologies with products designed for the effective reduction and recovery of scrap...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Machineries for e-waste shredding & recycling

    Governments and manufacturers of electronic hardware are increasingly coming under pressure regarding the safe disposal of electronic waste once their useful life has been completed. End-of-life (EOL) legislation for e-scrap is in place in many countries and pending throughout Europe and North America. Shred-Tech® has engineered and manufactured custom systems to shred, separate and recover the component materials that make up these electronic products.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Machineries for product destruction & recovery

    Complete Turnkey Systems, custom designed and manufactured by Shred-Tech®, destroy, recover and separate a wide variety of off-spec, mis-packaged and out-dated products. Shred-Tech®’s Material Separation and Recovery / Destruction Systems are used around the world for recovering precious metals from computers and telecommunications scrap, nylon from carpet, and recyclables from MSW, just to name a few. Mis-packaged consumer products such as breakfast cereals, cosmetics, milk and juice containers,...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Shredding machineries for hard drive shredding

    Hard Drive Destruction is one of the fastest growing segments in the Information Destruction Industry. The ST-5 Portable Plug-In Hard Drive Shredder and our ST-5 Stationary Hard Drive Shredder Systems can destroy a hard drive in just 5 seconds. Both shredding systems are also electronically interlocked for safe and easy operation.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Shredding machineries for waste processing

    Each system is designed to meet regulatory safety, and material handling requirements. Shred-Tech® engineers are experienced at designing turnkey solutions to each unique waste handling and processing challenge.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Chemical filtration in lacquers for the recycling industry

    In the field of waste water treatment atech membranes are used, for example, for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Automobile injection-moulded shredding for the special waste recycling industry

    Shredding plants for plastics from automobile industry as well as injection-moulded parts.

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    High-end baling and waste compacting solutions for RDF, SRF and MSW sector

    Refused-derived fuel (RDF) is a form of municipal solid waste (MSW) that has been treated in order to burn more efficiently. Solid recovered fuel (SRF) is waste derived fuel that meet a higher quality specification than RDF.

    By Presona AB based in Tomelilla, SWEDEN.

  • Premium

    Recycling EPS with Styrofoam Shredders & Compactors

    Used Styrofoam, also called EPS or expandable polystyrene foam, is light, hygienic and commonly used to pack food, drinks, fragile and deformable goods. Usually, Styrofoam products are 98% air and only 2% PS. It has been a big environmental problem due to the fact that the material is difficult to recycle and costly to transport. Harden Machinery has been dedicated to Styrofoam/EPS/XPS volume reduction technologies and the Styrofoam/EPS/XPS densifier is one of our major products. With our Styrofoam/EPS/XPS...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Air pollution control solution for incineration sector

    Waste incineration, such as sewage sludge, municipal solid waste and hazardous waste incineration are areas under particular scrutiny by regulators because of their multiple toxic pollutants. The Clean Air Group, LLC has been selected by several hazardous waste facilities to design and build integrated multiple pollutant air pollution control systems to replace existing scrubber systems to meet the new Maximum Achievable Control Technology (MACT) standards. In several instances, only a scrubber was required, in...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Plant solutions for refuse derived fuel (RDF)

    Refuse Derived Fuel (RDF) are fuels derived mainly from industrial waste, bulky and commercial waste or from sorting residues delivered by recyclable material sorting plants.

    By REDWAVE - a division of BT-Wolfgang Binder GmbH based in Eggersdorf bei Graz, AUSTRIA.

  • Premium

    Waste incineration line continuous monitoring solutions

    In accordance with "Standard for pollution control on the municipal solid waste incineration" (draft), all existing and new the municipal solid waste incinerators need automatic continuous on-line monitoring of main ingredients in incineration flue gas. Monitoring projects should include at least HCl, SO2, NOx, soot, etc., but also need to detect CO and HF in some higher environmental requirements situations.

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Recycling equipments for shredder light fraction (SLF) recycling

    Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand i.e. mineral substances (~15%), Textiles/leather/wood (~10%), Paint dust/rust (~10%) and Residual metals (~5%). Other names for SLF are ASR (Automobile Shredder Residue)...

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Inflammable packages shredding for the special waste recycling industry

    Plant for shredding of different packages with remaining contents, partly also inflammable and with chemical origin.

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    Automobile plastic shredding for the special waste recycling industry

    Shredding plants for plastics from automobile industry as well as injection-moulded parts.

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    Shredding technology for rubber tire recycling sector

    As we known, the black pollution- tires cover all over the world and it is growing at one billion waste tire every year. It does damage to the environment. The traditional disposal method of waste tire is to burn or pile up outdoor for a long time, but whether burning or piling up, waste tire would take up a lot of land and cause new pollution during waste tires. So we need to recycle waste tires. Rubber tire recycling machine can crush waste rubber into chip. The finial rubber granules can be made into rubber...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Gas analyzers and monitoring systems for waste incineration sector

    Waste-to-energy (WtE) or energy-from-waste (EfW) through incineration of waste is on the one hand an effective way of producing electricity and heat, while on the other hand it is disposing of possibly hazardous or unrecyclable waste. Its purpose is not to compete with waste recycling, reuse and prevention, but to complement them. After all, incineration not only reduces the amount of hazardous waste, but may also generate energy through the gases released in the process. Read about our solutions for waste-to-energ...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Recycling equipments for various scrap

    Where some see waste or scrap, others see opportunities. The recycling equipment from Eldan has converted millions of tonnes of industrial and consumer waste and scrap into valuable resources, thus helping both business and environment. We have the know-how, the experience and the capability to help with your specific problem – from small to large scale projects, from designing the recycling system to commissioning, we are there for you.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you