Aquamonix products

The 2020 ABS-Body Electromagnetic Flowmeter, coupled with the I500 or M500 flow transmitters are ideally suited to accurately measure the flow rate of a wide variety of conductive process liquids including water, wastewater, effluent and selected chemical applications. The 2020 ABS-Body Electromagnetic Flowmeter can be paired with either Solar or 240VAC electronics, including the I500 and M500. The 2020 ABS-Body Electromagnetic Flowmeter is compatible with legacy I300 and M300 Flowmeters.

The i500 Electromagnetic Flowmeter is a no compromises, high accuracy, high capability, bullet-proof water flow transmitter and wastewater measurement device. It complies with the new Australian Standard AS/NZS 4747:2013 - Meters for Non-Urban Water Supply. It is a fully pattern approved instrument from DN50 to DN600. The meter will meet the demanding requirements for accurate metering of irrigation supplies but is equally at home in other water supply applications including urban water (recycled water, distribution network and revenue monitoring), mining and environmental monitoring.

The EC250 Electrical Conductivity Sensor provides highly accurate conductivity measurements in a wide range of hydrological applications.

The ORP1000 is a fully submersible ORP sensor, well proven to withstand harsh field conditions. The ORP sensor requires a low voltage power supply and provides a calibrated 4–20 mA output.

The sensor features a field replaceable, gel-filled pH electrode. The electrode’s reference is protected by a special porous PTFE ring which is impregnated with a special conductive gel. The protection ring prevents chemical or biological fouling from reaching the reference, extending the life of the combination electrode. At the end of its life, the electrode can be replaced by the user in the field without the need to return the sensor to the factory.

The Pressure Sensor PS1000 has a standard, 2-wire, loop powered, 4-20mA output with an option for 0-2.5Vdc suitable for a wide range of data Loggers, process controllers and other third party devices. A durable corrosion resistant body, ceramic capacitance transducer and double O ring sealing ensures suitability for harsh environment applications.

The PS7000 Level Sensor has a standard, 2-wire, loop powered, 4-20mA output with an option for 0-2.5Vdc suitable for a wide range of data loggers, process controllers and other third-party devices. A robust, 22mm, 316 stainless steel body, ceramic capacitance transducer and double O ring sealing ensure suitability for a range of environmental applications.

The TS1000 Turbidity Sensor is a low power unit and provides both 4-20mA and 0-2.5V outputs. The sensor features an integral wiper, providing long-term reliable operation at remote sites where bio-fouling or sedimentation is likely. A durable acetal body and double O-ring design ensure suitability for harsh environment applications. The Turbidity Sensor can be supplied in various ranges and comes fitted with a moulded polyurethane cable.

Many countries around the world are in the process of adopting nitrate sensor and caps via nitrogen discharge allowances to manage nitrate losses into surface and groundwater resources. This issue is particularly prevalent in areas where agricultural production has the potential to impact on downstream water resources. To address this, Aquamonix has commenced selling the Hydrometrics GW50 Nitrate sensor.  It is a lower cost sensor capable of measuring the Nitrate concentration of nitrates in groundwater via monitoring wells.