Baghouse.com products

Baghouse.com Brand dust collectors are known the world over as the most powerful and longest lasting Baghouses available. Standard value-added features include such as larger inlet diffusers to prevent hopper turbulence, re-entrainment and facilitate material drop-out. Our Baghouses also include an added expanded quiescent free-board zone between the inlet and the bottom of the filter bags to reduce unnecessary dust load, filter abrasion and interstitial velocity that further enhancing material drop-out all before the air stream even reaches the filters. Baghouses.

A Cartridge Dust Collector uses perforated metal cartridges that are cylindrical shaped and open on one or both ends lined with a pleated nonwoven filtering media. Once installed, one end of the cartridge is sealed off and the open end is used for the clean exhaust. Similar to a Baghouse, the Gas stream is forced through the outside of the cartridge to the inside where it then exits back into the system. Cartridge Collectors are also compatible with Reverse or Pulse Jet cleaning. Large numbers of these Collectors can be installed and used for continuous filtration for a location’s Dust Collection system, such as during Asphalt production.

Cyclone dust collectors are often employed as an initial stage collector or prefilter to lighten heavy dusts loads before being sent to a primary collector like a baghouse or cartridge collector. Cyclones are also used for product classification or for material recovery in applications where only dust fines need to be removed and larger size dust can be reclaimed and reintroduced back into the process. By removing coarse particles from the gas stream cyclone allow fabric filter collectors to handle only the finer particles.  This increases the efficiency and service life of the filters in the baghouse or cartridges in the cartridge collector, protecting your larger and most costly units and their filters from unnecessary wear and tear.