BARR Plastics Inc.
4 products found

BARR Plastics Inc. products

Septic Systems & Wastewater Treatment

Model HD - Poly Pump Chambers & Lift Stations

300 to 2500 USG / 1150 to 9500 L Capacity range. Designed for collection of raw sewage and other wastewater effluents and drainage water and housing a submersible pump(s) for situations where pressurized discharge of raw sewage or other effluent is required. For quick install at site, BARR can pre-assemble Pump Chambers as need with Pumps, Fittings, Piping, Valves, Float Switch Brackets Float Switches & Alarms, Manway Risers and other fixtures as required. Suitable for 3` of burial depth (above top surface of tank). Contact BARR if Pump Chamber is to be installed in an area where high water table ever exists. BARR Pump Chambers are corrosion resistant, water-tight and will last a lifetime if installed according to guidelines, unlike concrete chambers which can be subject to deterioration, cracking and leaking.

AY Macdonald - Sewage & Effluent Pumps & Controls

Rugged, cast iron submersible for residental and light commercial wastewater applications. High torque capacitor start motors. Upper and lower ball bearings. 2` NPT vertical discharge, vortex impellers. Cast iron housing. Stainless steel fasteners and motor shaft. Oil-filled motors (non-toxic oil). Integrated clip for float switch cables. Available with or without piggyback float switch.

Model EZ - Flow Drainfield Infiltrator Systems

Always clean and free of fines. Bundles are quick to install, saving costs on heavy machinery and labour. Modular construction allows configurations to match trench dimensions for most system shapes and sizes. Engineered for optimal storage and absorption efficiencies. Ability to contour along sloped sites and around trees or landscaping. Lightweight system is perfect for repairs and tight job sites. Easily hand-carried into position, reducing time and labour.

Model PL-68/PLL-122/PL-525 & PL-625 - Effluent Filters

PL-68: An ideal, economical, high flow (800 GPD)  residential effluent filter. A - PL68 Tee is available - designed to accept Polylok`s new snap in gas deflector to deflect gas bubbles away from the tee and to keep the solids in the tank when filter is removed. Designed to fit into standard 4` sewer drain Tee fitting / outlet baffle in 2 chamber septic tanks.