COSA Xentaur - a brand by Process Insights, Inc. products

The COSA Optical Flow Meter (OFM) uses laser beams to measure the gas flow by sensing the velocity of microscopic particulates naturally occurring in the gas. The COSA Optical Flow Meter (OFM) has been specifically developed for gas applications with highly variable flow rates and a wide range of pipe diameters. The OFM accuracy is not affected by gas composition or contamination of the sensing elements. The OFM uses laser beams to measure the gas flow by sensing the velocity of microscopic particulates naturally occurring in the gas. Our OFM is compliant with ASME Code Section VIII, Division 1 and has been designed, manufactured, inspected and tested according to its recommendations.

The COSA/Xentaur Continuous Hydrogen Analyzer (CHA), used in countless UOP Schedule A applications for many years, is built under a license to a patented UOP design. It provides petroleum refiners, petrochemical producers, and electric power generators a means to continuously and accurately monitor hydrogen concentration in gaseous streams.

COSA Xentaur introduces one of the first commercially available portable Optical Gas Calorimeters. After extensive development work, this instrument proudes the fastest spot check response in the industry; T90=15 seconds for Natural Gas and LPG.

COSA’s zirconia oxygen gas analyzers are widely used; not only in industries of high energy consumption, such as steel, power, petroleum/petrochemicals, ceramics, paper/pulp, food, and textile industries, but also in various combustion facilities, such as garbage incinerators and medium-to-small sized boilers, as combustion controllers, achieving a significant energy-saving effect. The oxygen concentration control ensures complete combustion, thus reducing CO2, SOX, and NOX emissions and helping prevent global warming and air pollution.

The COSA 707 is a hand held multigas analyzer for industrial and combustion processes.The COSA 707 is an easy to hold, hand-held emissions analyzers capable of measuring up to seven different gases.The emissions analyzer can be equipped with up to 6 electrochemical sensors and a CO2 IR-bench for simultaneous measurements. Cells can be installed for making measurements of low CO and low NO down to 0.1ppm.The COSA 707 has a bright  3.5` TFT display with backlights and a zoom function. The unit can communicate through Bluetooth, USB or with a 2GB SD-Card.New sensors for the COSA 707 include a CO2 sensor for a range of 0-20% (IR-Bench) and a H2S sensor for 0-500ppm (EC Sensor).

The 72 is an Excellent, Flexible and Simple Analyzer for Measuring Humidity and Temperature. The 72 uses fixed or remote mount probes offering both humidity and temperature measurements. All connectable probes are pre-calibrated and allow replacement without process shut downs. The sensors use precious metal to produce large stability and accuracy under chemical attacks.

Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements.

Optical Moisture Meter for Heat Treating Applications and Moisture in CO2 Applications. The XTDL-HT is designed with a new proprietary optical sampling system for the dirty blanket gases in your Heat Treating applications that causes other analyzers to be damaged, readings to drift and a measurement that cannot be trusted as reported by our many customers after 30 years in this business.

The ESS dew point measuring system has a modular design and can be configured to accommodate almost any measurement requirement for dew point analysis utilizing several different dew point meters manufactured by COSA Xentaur.

Mission Critical Process Moisture Analyzer Designed to Handle Rigorous Demands of Moisture Measurement in Natural Gas Applications, Provides Fully Automatic Self-Calibration Dew Point System, Provides Cost Effective Solution for Demanding and Critical Moisture Monitoring Applications