Dürr Systems, Inc.

36 products found

Dürr Systems, Inc. Products

  • Exhaust Gas and Air Pollution Control - Thermal Processes

    When volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) exist in a solvent-laden exhaust air stream, they can be collected for recovery and potential re-use or they must be destroyed. If the solvents have little or no recovery value or where there are concerns for disposal of toxic compounds, thermal and catalytic oxidation are the best options to destroy VOCs, as well as odor control.

  • CleanSwitch - Regenerative Thermal Oxidizer (RTO)

    CleanSwitch - Regenerative Thermal Oxidizer (RTO)

    The CleanSwitch regenerative thermal oxidizer (RTO) from Dürr Megtec delivers simplicity and cost-effectiveness. The two-chamber, single-vessel system delivers 99+% VOC destruction and thermal efficiencies up to 97%. When it comes to VOC abatement and managing hazardous air pollutants (HAPs), the CleanSwitch RTO provides exceptional operating economy. For many applications, the CleanSwitch RTO will run in a self-sustaining mode with no additional...

  • Epsilon - Regenerative Thermal Oxidizer (RTO)

    Epsilon - Regenerative Thermal Oxidizer (RTO)

    The Epsilon RTO from Dürr Megtec is a modularized multi-canister oxidizer offering a highly flexible design that makes it appropriate for many applications where volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) must be managed, and odor control requirements must be met.

  • Millennium - Regenerative Thermal Oxidizer (RTO)

    Millennium - Regenerative Thermal Oxidizer (RTO)

    For low-flow process applications, the Millennium RTO redefines the economics of clean air compliance compared to other VOC control technologies typically deployed in high-flow process applications.

  • Dürr Megtec Vocsidizer - Regenerative Thermal Oxidizer (RTO)

    Dürr Megtec Vocsidizer - Regenerative Thermal Oxidizer (RTO)

    The Dürr Megtec Vocsidizer is a unique, single-bed, flameless regenerative thermal oxidizer (RTO) in a compact, modular design with low running costs. The system combines high VOC destruction, simple design, reliability, and superior energy efficiency.

  • Exhaust Gas and Air Pollution Control - Separation Processes

    Many manufacturing processes produce volatile organic compounds (VOCs) and hazardous air pollutants (HAPs). These emissions must be properly controlled. Dürr Megtec delivers environmental technologies to control emissions of VOCs/HAPs, NOx, acid gasses, acid mists, and particulates. A strong heritage of technical development and innovative solutions enables Dürr Megtec to provide consistently reliable and energy-saving systems for new or upgrade, simple or complex, large or small p

  • Dürr Megtec - Model Pulse Jet - Fabric Filters

    Dürr Megtec - Model Pulse Jet - Fabric Filters

    Dürr Megtec pulse jet fabric filters help reduce the cost of particulate control. Our innovative technologies provide some of the lowest emission fabric filters in the world for a variety of industries, including steel, cement, incineration and process steam generation.

  • Dürr Megtec - Cyclone Dust Collector

    Dürr Megtec - Cyclone Dust Collector

    Dürr Megtec’s cyclone dust collector is a simple and efficient multiple-tube collector. The versatile system is designed for use in a variety of industrial applications, including cement plants, steel mills, petroleum coke plants, metallurgical plants, sawmills and other types of facilities that process dust.

  • Dürr Megtec - Distillation and Purification Systems

    Dürr Megtec - Distillation and Purification Systems

    Dürr Megtec designs, builds and installs distillation equipment to separate water and solvents, and solvents from each other. Depending on the purity levels required, our adsorption systems and solvent distillation equipment can be used in continuous or batch processes, as well as vacuum, atmospheric or pressure.

  • Exhaust Gas and Air Pollution Control - Sorptive Processes

    Dürr Megtec offers proven solutions for emissions control utilizing both absorption and adsorption technologies.

  • Dürr Megtec - Spray Dryer Absorber (SDA)

    Dürr Megtec - Spray Dryer Absorber (SDA)

    Dürr Megtec spray dryer absorber (SDA) technology provides effective control of SOx and HCl by the injection of finely atomized alkaline slurries into the gas stream. With our semi-dry scrubber technology, all water evaporates so there is no liquid waste stream, unlike wet scrubbers.

  • Dürr Megtec - Solvent Recovery Systems

    Dürr Megtec - Solvent Recovery Systems

    Dürr Megtec’s solvent recovery systems are based on today’s most advanced and reliable adsorption and distillation technologies. They are site-specific and add long-term value to your manufacturing operation allowing you to produce high quality solvent-based products.

  • Dürr Megtec - Carbon Adsorption Systems

    Dürr Megtec - Carbon Adsorption Systems

    Carbon adsorption systems from Dürr Megtec are used in a wide range of industrial applications. Both regenerative and non-regenerative systems are used to capture vapor-phase emissions of volatile organic compound (VOC) solvents from industrial processes and prevent their emission to the atmosphere.

  • Turbotak - Atomizing Scrubber Control System

    Turbotak - Atomizing Scrubber Control System

    For gas streams containing acid gases and particulate, the Turbotak atomizing scrubber controls these contaminants in one system with minimal pressure drop, low water usage, and low maintenance.

  • Exhaust Gas and Air Pollution Control - Catalytic/Non-Catalytic Processes

    As a single-source supplier, Dürr Megtec can develop an integrated multi-pollutant strategy to match your long-term emissions requirements. Through every phase of the project, we determine your needs and recommend a customized solution. For example, Dürr Megtec combines its VOC catalytic oxidation expertise with selective catalytic reduction (SCR) and selective non-catalytic reduction (SNCR) technology to provide a proven and competitive suite of NOx control solutions.

  • Dürr Megtec - Catalytic Recuperative Oxidizers

    Dürr Megtec - Catalytic Recuperative Oxidizers

    Dürr Megtec’s catalytic recuperative oxidizers provide a solution for certain process industrial applications. Dürr Megtec offers catalytic recuperative oxidizers as a solution for certain process industrial applications. The use of catalysts can reduce the temperature at which chemical reactions occur that convert VOCs into carbon dioxide and water. The result is a lower operating temperature, which not only reduces operating costs,...

  • Drying and Curing

    Dürr Megtec continues to pioneer the engineering and development of non-contact flotation dryers and ovens for roll-to-roll drying and curing. Its 50+ years of experience, more than 100 patents, and thousands of dryer installations worldwide confirm its leadership position as a world-class supplier of drying and curing systems for industrial applications.

  • Dürr Megtec - Roll-to-Roll Process Applications

    Dürr Megtec - Roll-to-Roll Process Applications

    Dürr Megtec continues to pioneer the engineering and development of non-contact flotation dryers and ovens. Its 45+ years of experience, more than 100 patents, and thousands of dryer installations worldwide confirm its leadership position as a world-class supplier of drying and curing systems for industrial applications.

  • Dürr Megtec - Roll Support Dryers

    Dürr Megtec - Roll Support Dryers

    Dürr Megtec offers several oven designs incorporating through-air only or hybrid technology utilizing impingement and through-air for heating, drying, and thermal curing. Some materials exhibit sufficient air permeability to benefit from highly effective through-air oven designs. While supported on an air-permeable belt, heated and dried air pass through the product, thus affecting internal heat and mass transfer within the thickness of the...

  • Dürr Megtec - Conveyor Belt Dryers

    Dürr Megtec - Conveyor Belt Dryers

    Belt dryers and ovens provide continuous support to material as it moves through the oven. Examples include non-woven fiber mats, extensible membranes, friable webs, sheeted materials, low-strength tissue and toweling, and many other materials that cannot sustain tension stresses in roll support or flotation ovens. Convection and optional infrared (IR) heating zones efficiently dry and thermally cure in processing conditions engineered to deliver...

  • Dürr Megtec - Impingement Through-Air Dryers

    Dürr Megtec - Impingement Through-Air Dryers

    Dürr Megtec offers gas-fired and electric IR configurations to meet the demands of a variety of products and applications. These include systems designed for complete drying, preheating, pre-drying, fusing, curing and profiling. By combining the correct wavelength infrared and optimizing of the control system, precise process conditions can be achieved to maximize product quality in the most efficient manner.

  • Dürr Megtec - Model IR - Hybrid Dryers

    Dürr Megtec - Model IR - Hybrid Dryers

    Dürr Megtec offers gas-fired and electric IR configurations to meet the demands of a variety of products and applications. These include systems designed for complete drying, preheating, pre-drying, fusing, curing and profiling. By combining the correct wavelength infrared and optimizing of the control system, precise process conditions can be achieved to maximize product quality in the most efficient manner.

  • Energy Storage

    Dürr Megtec provides a comprehensive turnkey approach for producing battery electrode coated materials. Our capabilities cover both ends of the production line, as well as everything in between. We provide systems for raw material handling, slurry mixing and fluid delivery, web handling, coating and drying, solvent recovery and purification, calendering, and slitting.

  • Dürr Megtec - Electrode Coating

    Dürr Megtec - Electrode Coating

    Dürr Megtec provides a comprehensive turnkey approach for producing battery electrode coated materials. Our capabilities cover both ends of the production line, as well as everything in between. We provide systems for raw material handling, slurry mixing and fluid delivery, web handling, coating and drying, solvent recovery and purification, calendering, and slitting.

  • Dürr Megtec - Li-ion Battery Electrode

    Dürr Megtec - Li-ion Battery Electrode

    Dürr Megtec provides a comprehensive turnkey approach for producing battery electrode coated materials. Our capabilities cover both ends of the production line, as well as everything in between. We provide systems for raw material handling, slurry mixing and fluid delivery, web handling, coating and drying, solvent recovery and purification, calendering, and slitting.

  • Dürr Megtec - Solvent Recovery Systems for Energy Storage

    Dürr Megtec - Solvent Recovery Systems for Energy Storage

    Dürr Megtec provides a comprehensive turnkey approach for producing battery electrode coated materials. Our capabilities cover both ends of the production line, as well as everything in between. We provide systems for raw material handling, slurry mixing and fluid delivery, web handling, coating and drying, solvent recovery and purification, calendering, and slitting.

  • Material Handling Systems

    Dürr Megtec automatic match-speed splicers help manufacturers increase productivity and reduce waste. Dürr Megtec delivers a full system from the wrapped roll converted to a web at the right tension and lateral position, along with high splice success rates, fewer web breaks, simple splice preparation, and low maintenance.

  • Dürr Megtec - Model AR35-I - Compact Flying AR Match-Speed Splicer

    Dürr Megtec - Model AR35-I - Compact Flying AR Match-Speed Splicer

    The Dürr Megtec AR35-I is a compact flying splicer that is the ideal choice for printers who need maximum performance, but only have a minimum amount of space. The automatic splicer is built in India specifically for the Indian printing market: Ideal for printers with limited space. Capacity to handle reels up to 1,070 mm (42') in diameter. Designed for right angle installation, basement or inline to press. More than 1,000 AR models installed...

  • Development Center

    To support the development of specialized and proprietary coating applications, Dürr Megtec has an in-house Development Center with a roll-to-roll pilot coating line that can be rented and includes coating and drying capabilities. The pilot line includes coating and drying capabilities, providing a fully controlled test environment for complete process development and testing for short production runs.

  • Dürr Megtec - Benchtop Process Tools

    Dürr Megtec - Benchtop Process Tools

    In-house drying lab: A bench-top system that captures complete drying characteristics of coated substrates from small-size samples. The system enables our process engineers to track rates of evaporation for water and organic solvents, along with determining the drying time required to reach target solvent or moisture residuals in the product. The drying lab is geared toward the early scale-up steps in formulation development, drying characterization,...

  • Industrial Environmental

    MEGTEC offers a full suite of emissions control solutions for VOC, particulate, H2S, NOx and SO2, acid mist and gases, odor, and more. Our solvent recovery systems provide an economical solution for certain applications.

  • Dürr Megtec - Flue Gas Temperature Control System

    Dürr Megtec - Flue Gas Temperature Control System

    Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero...

  • Dürr MEGTEC - Air Dampers

    Dürr MEGTEC - Air Dampers

    Air dampers from Dürr MEGTEC are designed and built to provide years of trouble-free service, even when subjected to rigorous process and climate conditions. These industrial duty dampers can be used for controlling air flow, isolating air streams, or to divert air flow in multiple directions as dictated by process requirements.

  • Air Gas Ratio Control (AGRC) System

    Air Gas Ratio Control (AGRC) System

    The Dürr MEGTEC Air Gas Ratio Control (AGRC) system measures and controls gas and air flows continuously through the programmable logic controller (PLC). This system uses less energy and delivers lower emission rates than a comparable non-AGRC equipped regenerable thermal oxidizer (RTO), two important factors when operating gas-fired equipment.

  • Dürr MEGTEC ProcessMonitor - Monitoring & Reporting System

    Dürr MEGTEC ProcessMonitor - Monitoring & Reporting System

    The Dürr MEGTEC ProcessMonitor data acquisition and reporting system provides secure, managed remote RTO/RCO monitoring and support to observe, store and report equipment operational data. The system is comprised of a network address translation (NAT) router with a built-in firewall, a PLC connection, and an Ethernet-based communication port which allows VPN access. The ProcessMonitor system has an option to continually collect data for regular...