Flexco products

The Flexco Bolt Solid Plate Fastening System produces a strong, sift-free splice with superior holding ability thanks to a combination of top-and-bottom plate compression and high-tensile-strength bolts.

The Flexco Bolt Hinged Fastening System is ideal for belt conveyor applications subject to length adjustments because the joint can be separated easily by removing the hinge pin. A combination of penetration and compression delivers strength and reliability to belts operating over smaller pulleys.

The Flexco Rivet Solid Plate Fastening System is recommended for high-tension applications, with a staggered, multiple-point attachment for a long-lasting hold. Ideal for use with straight-warped belts because rivets separate the fibers instead of displacing the carcass.

Avoid the problems and potential dangers associated with homemade devices with belt clamps designed to properly secure and clamp a belt for safe conveyor maintenance.

A properly squared belt discourages mistracking and splice failure, so utilizing a belt cutter that provides a straight cut is paramount to the splicing process. Flexco Belt Cutters minimize the danger of accidental injury during the belt cutting process.

The Flex-Lifter Belt Lifter puts an end to pry bars and manual lifting, making a difficult and hazardous job easier and safer.

The Novitool Aero Splice Press offers the latest technology to create a superior endless splice, typically in less than 10 minutes.  All necessary components are compactly self-contained, making the press easy to use, store, and transport. Novitool Aero 325 Splice Press also available to splice belts that drive live rollers.

The Novitool Amigo Splice Press splices monolithic belting, ensuring tight pitch tolerance and no pinholes. Accuracy, speed, and operator safety are fully integrated into the Amigo design, making it an ideal splicing tool for in-shop or on-site splicing.

The Novitool^® Pun M™ Mobile Finger Punch is designed to effortlessly punch fingers into PU and PVC conveyor belts in preparation for installing endless splices. Depending on the desired finger dimensions, Flexco offers a variety of punchboards for the Pun M, including custom punchboards. Novitool^® Pun M™ NDX Mobile Finger Punch also available to punch belts that drive live rollers.

The Novitool Ply 130 Ply Separator cuts between the plies of conveyor belting for belt splice preparation. Plies can be split as deep as 5” (130 mm) in one action, making the tool perfect for preparing stepped splices and for recessing mechanical fasteners.