21 products found

Oil Skimmers, Inc. Products

Oil Removal Systems

For 50 years, Oil Skimmers, Inc. has designed and engineered custom oil removal systems for all industries and applications around the world. Select from the systems featured here, or learn more about custom engineered solutions below.
OSI - Model ORTS - Oil Removal and Transfer System

The ORTS® from Oil Skimmers, Inc. is a complete oil removal and transfer system, all on one skid. The system efficiently removes oil from the surface of water, stores the recovered oil, and transfers it to a remote location. The system is available in a wide variety of configurations, and is completely customizable to meet any application requirement.
OSI ESS™ - Enclosed Skimming System

The ESS™ Enclosed Skimming System is a complete oil removal solution that is enclosed to protect the skimming components from wind or weather, harsh environments indoors or out, prevent tampering, address aesthetic and environmental concerns, and enclose any leaks or drips. If the application requires, the ESS can be completely sealed and gasketed to contain Volatile Organic Compounds (VOCs) from escaping into the environment.
OSI - Hanging Mount Oil Removal System

For areas where an overhead structure is present, there is the option to mount the Model 6V by hanging it from its handles. It can be mounted at any height to allow gravity discharge. A “hanging kit” is used to channel the oil in any direction for easy collection.
Frame Mounted Oil Removal Systems
OSI - Floor Mounted Oil Removal Systems

Floor Mounted Oil Removal Systems comes complete with: Oil Skimmer, 30, 60, or 72-inch Frame Mount, Sludge Pan, Oil/Water Decanter, Cover for Sludge Pan and Decanter, Basic Control Panel (Skimmer Motor ON/OFF).
OSI - Guard Rail Mounted Oil Removal System

The Guard Rail Mounted Oil Removal System comes complete with: Oil Skimmer, Guard Rail Mounting Frame, Sludge Pan, Oil/Water Decanter, Cover for Sludge Pan and Decanter, Basic Control Panel (Skimmer Motor ON/OFF).
OSI - Wall Mounted Oil Removal System

The Wall Mounted Oil Removal System comes complete with: Oil Skimmer, Wall Mounting Frame, Sludge Pan, Oil/Water Decanter, Cover for Sludge Pan and Decanter, Basic Control Panel (Skimmer Motor ON/OFF).
Extended Reach Oil Skimming Systems

One challenge our customers face is how to locate the oil skimmer over the water, when it is impossible or undesirable to locate the system near the water’s edge. Previously, a costly walkway or platform was required; however, this issue was eliminated with Extended Reach Oil Removal Systems from Oil Skimmers, Inc. With Extended Reach Systems, the oil skimmer is mounted at the appropriate height to allow recovered oil to gravity drain to a collection vessel. These systems place the ski
OSI - Cantilever Mounted Oil Removal Systems

Cantilever Mounted Oil Removal Systems come complete with: Oil Skimmer with Safety Cover. 6 or 8-Foot Cantilevered Boom. Oil Collection Spout with Skimmer Mount. 1, 4, 5, or 6-foot Mast. Oil/Water Decanter. Cover for Decanter. Basic Control Panel (Skimmer Motor ON/OFF).
OSI - Balanced Boom Mounted Oil Removal System

The Balanced Boom Mounted Oil Removal System comes complete with: Oil Skimmer with Safety Cover, 12, 18, or 24-Foot Balanced Boom, Oil Collection Spout with Skimmer Mount, 4, 5, or 6-foot Mast, Oil/Water Decanter, Cover for Decanter, Basic Control Panel (Skimmer Motor ON/OFF).
OSI - ORTS Extended Reach

The ORTS Extended Reach comes complete with: Oil Skimmer with Safety Cover. 49-300 Gallon Tank with Cantilever or 300-2,000 Gallon Tank with Balanced Boom. Oil Collection Spout with Skimmer Mount. Oil/Water Decanter (Built-in to 49-65 gallon tanks. Optional for 300+ gallon tanks). Basic Control Panel (Skimmer Motor ON/OFF).
Mobile Oil Skimming Systems

For 50 years, our oil skimmers and skimming systems, featuring the free-floating oil collection tube have been considered the most efficient, trouble-free oil removal solutions for a wide variety of industries. In some applications, it is beneficial to our customers to be able to move the oil skimmer from one location to another. These systems are used on applications where: There is a need to skim oil or grease from more than one sump or pit, and the required frequency or amount of oil to r
OSI - Cart Mounted Oil Removal Systems

Cart Mounted Oil Removal Systems are used to easily move the skimming system from one sump, pit, tank, or pond to another. Cart Mounts are available for applications from small to large; moving a Model 1H from one parts washer to the next, or moving an Extended Reach ORTS with 1,000 gallon tank from one pond to another.
OSI - Pallet Mounted Oil Removal System

Pallet Mounted Oil Removal Systems can be easily moved by forklift or pallet jack from one skimming location to another.
OSI - Mobile ORTS (Oil Removal & Transfer System)

Recover waste oil at multiple plant locations or at various points around large ponds and lagoons with one versatile, portable, tank-mounted oil recovery system.
Brill Tube Type Skimmers
OSI Brill - Model 7V - High Capacity 1-Inch Tube Type Oil Skimmer

The Oil Skimmers, Inc, Model 7V Brill® oil skimming system is built with all the same proven, time-tested features of the of the Model 6V, but with added durability, flexibility and capacity. Developed to be the ultimate super-duty skimmer, the Model 7V is tougher, more versatile, and can recover more oil than any other tube type skimmer available.
OSI Brill - Model 6V - Vertical Tube Type Oil Skimmer

When it comes to oil skimming solutions, the Oil Skimmers Model 6V Brill® oil skimming system is the dependable, cost-effective and uncomplicated solution for removing oily waste from water during the manufacturing and wastewater treatment process. The Oil Skimmers Model 6V waste oil recovery system removes animal, vegetable and petroleum-based oils, fats, greases, and oily wastes that float on the surface of water or other liquids. The...
OSI Brill - Model 5H - Horizontal Tube Type Oil Skimmer

The Oil Skimmers Model 5H is designed for efficient oil removal in areas where the unit can be located within 3 feet of the water level. The “H” stand for “horizontal” in that the tube operates horizontally. This unit is used for above-ground tanks, parts washers, and other applications where the skimmer can remain within 3 feet of the skimming area. Also similar to our Model 6V Brill™, the Model 5H waste...
OSI Brill - Model 1H - Compact Tube Type Oil Skimmer

The Model 1H is the most compact Brill tube-type skimmer manufactured by Oil Skimmers, Inc. The unit is designed to remove oil from aqueous washing and machining coolant tanks where restricted access or small surface area make skimming a challenge. As with all Oil Skimmers, Inc. tube skimmers, the Model 1H provides continuous oil removal anywhere it’s needed – from parts washing operations in custom machine shops to start-up oil recovery...
Oil Skimmers - Floating Weir Skimmers
OSI - Model 3F Series - Floating Weir Skimmers

The Oil Skimmers, Inc. line of 3F floating weir skimmers is easily deployable and well-suited for a wide range of oil removal jobs. 3F Series weirs work in sumps, above ground storage tanks, parts washing tanks, equalization tanks, oil/water separators, and on settling and leachate ponds, lagoons or open water where selective adhesion skimming is not applicable. Built of long-lasting 304 or 316 stainless steel, 3F units are lightweight and compact,...
Tanks & Separators
OSI SAS - Tank - Oil Water Separator

Oil Water Separator with Continuous Oil Removal; In many industrial settings, oil and water meet and flow together. Before re-using, treating, or discharging the water, the oil should be separated and removed. When oily wastewater, process water, wash water, or rain run-off water does not have sufficient time or space for the oil and water to separate naturally, a SAS Tank can answer the challenge.
OSI CoolSkim™ - Coolant Skimmer

Oil contamination issues often result in downtime, maintenance, bacteria growth, and costly replacement of coolants and wash water. In certain applications, proper removal of tramp oil can prove difficult due to limited access to the sump. CoolSkim coolant skimmer and coalescerFor applications like these, where limited space or access doesn’t allow for the installation of a Brill® tube-type oil skimmer, Oil Skimmers, Inc. has developed the...
OSI - Skim 1st Tanks

Many industrial and commercial operations that generate wastewater face three key challenges: Allow oil and water the proper time to separate in order to recover the oil. Determine most efficient method to remove oil from the surface of wastewater prior to further treatment or discharge. Address varying flow rates of wastewater for maximum efficiency of treatment or ultrafiltration. Oil/water separation, oil skimming, and wastewater flow regulation...
OSI - Oil/Water Decanting System

To maximize waste oil recovery, decanters are used in combination with oil skimmers. The decanter ensures the least possible percentage of water in the recovered oil by further separating oil and water, and returning the water to the skimming area.

Contact supplier

Loading... Drop file here or browse Great, file uploaded. Change File Drop file here or browse

Yes, please send to similar suppliers.

Oil Skimmers, Inc. Products

Oil Removal Systems

Frame Mounted Oil Removal Systems

Extended Reach Oil Skimming Systems

Mobile Oil Skimming Systems

Brill Tube Type Skimmers

Oil Skimmers - Floating Weir Skimmers

Tanks & Separators