107 products found
Sandvik Mining and Construction B.V Products
-
Rock Tools
-
Model 2000 - Grading Tools
Our System 2000 road grading maintenance systems feature conical style, wear and impact-resistant carbide tip tools for consistent grading. Tool tips have a valve-seat braze joint for increased strength and shear resistance. System 2000 improves the performance ...
-
Rotary Drill String Tools
Our full offering of rotary drill string tools provide the best combination for all mining blasthole drilling conditions. High quality drilling tools are designed for reliability and longevity, to give you the lowest total operating ...
-
Model S22 - 12-14 Feet Motor Grader
Our grader boards are available in various sizes and easily fit the blades of most brands of motor graders in the 12- to 14-foot size categories. Our boards are available with either insert or cap carbide tipped tools for your different ...
Model S25 - 16 Feet Motor Grader
Our grader boards are available in various sizes and can easily fit the blades of most brands of motor graders in the 16-foot size category. Boards are available with either insert or cap carbide tipped tools for different ...
Model S35 - 24 Feet Motor Grader
Our grade boards are available in various sizes and can easily fit the blades of most brands of motor graders in the 24-foot size category. Boards are available with either insert or cap carbide tipped tools for different ...
DTH Hammers
Sandvik DTH hammers and drill bits are designed together to work in perfect unison, giving high penetration rates, long service life and low costs. The RH550-series hammers and bits features solutions, which optimizes impact-energy transmission into the rock. With no foot valve, a reversible casing and very few parts, they are reliable, easy to service and ...
Sandvik - Model RH460 Series - DTH Hammers Drilling Tools
The new Sandvik RH460 hammer takes DTH drilling to higher levels. It has been developed for superior productivity in variable ground conditions. Higher impact energy is achieved at lower air consumption, maximizing productivity and lowering costs. RH460 hammers are available industry standard shanks for greater product ...
Mining Crushers
Vibrocone - Cone Crusher
From the outside, Vibrocone looks almost like a conventional cone crusher and under its hood it still has a crushing chamber with a mantle and a concave/bowl liner. But while the movement of the mantle in a conventional cone crusher is always given, Vibrocone allows it to swing unrestrained inside the crushing chamber. The main shaft is supported by a spherical bearing and the crushing action comes from an unbalanced weight rotating around the main ...
Underground Loaders (LHDs)
Sandvik LHD loaders are developed for the toughest of underground applications, with overall production economy, safety and reliability in mind. With FEA-optimized frames, powerful prime movers, advanced drive train technology, four-wheel drive, articulated steering and ergonomic controls, they are extremely rugged, highly maneuverable and exceptionally productive. With tramming capacities from 1 to 25 metric tons, they are available in both diesel and ...
Continuous Miner
Sandvik electrically powered, track-mounted continuous mining machines are designed to cut coal and soft minerals continually, eliminating the need for drill-and-blast. Using advanced cutting technology, they cut and gather the material simultaneously, and convey it into shuttle cars, haul trucks or a continuous haulage system. Extremely productive and reliable, they are used to develop longwall panels for extraction, as well as for full scale ...
Transport Crawlers
Sandvik transport crawlers are special vehicles used to relocate heavy mining equipment such as conveyor drive stations and semi-moble crushing plants safely and economically. The load carrying capacities of Sandvik transport crawlers range from 150 to 1500 metric ...
Raise Boring Tools and Systems
Sandvik raise-boring heads optimize the performance of the boring machine by having high penetration rates, great stability, low vibration and low torque demands. Together with our high-performance pilot bits, they enable shafts and holes from 0.66 to 6.0 meters in diameter to be bored to depths (or lengths) of up to 1000 meters quickly, economically and safely. Sandvik raise-boring heads are quick to assemble, have low maintenance demands and give ...
DTH Drilling Tools
Sandvik"s extensive range of tools for down-the-hole drilling includes hammers, drill bits and tool systems for simultaneous drilling-and-casing through difficult overburden. Combining advanced materials technology with skillful design focusing on performance, simplicity and endurance, our DTH tools give high productivity, great reliability and low operating ...
Underground Drill Rigs
Sandvik underground drill rigs come in five product families: mining jumbos, production drill rigs, rock support drill rigs, secondary breaking drill rigs, and tunneling jumbos. Each is specifically designed to suit the particular application in question. Equipped with high-performance hydraulic rock drills, ergonomic controls, and various levels of automatic drilling systems, they are highly productive, extremely reliable, and economical to use. In ...
Rotary Drilling Tools
Horizontal Direction Drilling (HDD) bits
Sandvik HDD roller-cone rock bits and reamers are specifically designed to meet the rigorous demands of horizontal directional drilling. The cutting structures and bearing designs lower torque requirements, resulting in higher penetration rates and longer operating hours. Sandvik HDD products enable contractors to drill and ream more and longer crossings in a single pass without the need to trip ...
Blast Hole Bits
Available in a wide selection of cutting structures, Sandvik blast hole bits feature innovative bearing technology with improved geometry, materials, and machining, resulting in longer bearing ...
Cutter-crushers
Multiprocessor BC Range
Sandvik"s BC multiprocessor is designed to perform a broad array of duties. Engineered for primary and secondary applications, these models are suitable for crushing concrete, cutting reinforcement structures, pulverizing, demolition and wood cutting. It can also be used in underwater applications as long as the slew bearing is kept above the water line. The interchangeable jaws enable these models to be quickly tailored to any ...
Cutter-crusher BC Range
The Sandvik Cutter-Crusher Range has been engineered for demolition applications. It is designed for crushing concrete and breaking objects, cutting reinforcement bars and other steel demolition ...
Safety and Environmental Products
Model FS1000 - Fire Protection System
The patented Sandvik FS1000 is a pre-engineered fire suppression system that requires no electrical or gas cartridge activation devices. A simple release of the stored pressure in the activation line initiates the foam discharge. Our range of tanks and the ability to combine multiple tanks to make larger systems makes it possible to custom fit the system to any equipment. Designed and manufactured in Australia, the FS1000 greatly reduces risk to people ...
Model FS500 - Fire Protection System
The Sandvik FS500 is a pre-engineered stand alone fixed fire suppression system suitable for all types of small vehicles, plant or equipment. It is a basic system for the protection of light vehicles with an engine rating of less than 125kW and not fitted with a turbocharger. The FS500 greatly reduces risk to people and property by providing effective fire protection and therefore safer operating conditions. It has been specifically designed to ...
Fire Extinguishers
Sandvik distribute a basic range of hand held and mobile fire extinguishers. We carry the sizes below, other sizes or different extinguishing agents may be available on ...
Bulk Materials Handling Equipment - Fully-Mobile Crushing Plants
Model PF300 - Bulk Materials Handling Equipment - Fully-Mobile Crushing Plants
Sandvik PF300 - Versatile crushing and superb maneuverability create exceptional, new fully-mobile crushing ...
Bulk Materials Handling Equipment - Semi-mobile Crushing Plants
Model PX100 - Semi-mobile Crushing Plants
In the image: Sandvik PX100 - option direct feed. Trucks dump into a tip feeding directly the ...
Model PX200 - Semi-mobile Crushing Plants
Sandvik PX200 - option indirect feed by apron feeder installed at Atik copper ...
Bulk Materials Handling Equipment - Stationary Crushing Plants
Model PZ100 - Stationary Crushing Plants
In the image: Sandvik PZ100 - direct feed. Trucks dump into a tip feeding directly the Sandvik gyratory ...
Model PZ200 - Stationary Crushing Plants
In the image: Sandvik PZ200 - indirect feed by apron ...
Conveyors and Conveyor Components - Conveyor Systems
Bengalla
The picture shows the overland belt conveyor system for the project Bengalla, Australia. Overland belt conveyor system. Designed to carry the coal from the mine to the wash plant. Equipped with low noise idlers to suit EPA ...
Yandi
Overland belt conveyor system for the project Yandi, Australia. Overland belt conveyor system comprises of 2 belt conveyors 90 m (295 ft) and 5 200 m (17 060 ft) in length. Designed to convey iron ore from the semi-mobile primary crushing station to the existing stockpile area. To allow for a future relocation the conveyor has been designed using a relocatable conveyor module mounted on relocatable concrete ...
Gregory
The picture shows the overland belt conveyor system for the project Gregory, Australia. Overland belt conveyor system. Designed with vertical and horizontal ...
Nova Lima-MG K2045
The picture shows the overland belt conveyor system for the project Nova Lima-MG K2045, Brazil. Overland belt conveyor system comprises 4 belt conveyors and 2 apron feeders. Designed to connect Tamanduá mine with Capitaó do Mato ...
Mariana-MG K3053
The picture shows the overland belt conveyor system for the project Mariana-MG K3053, Brazil. Overland belt conveyor system. Supply and installation of new and existing equipment - disassembled, reworked and ...
Dangote
Overland belt conveyor system for the project Dangote, Nigeria. Elevated 5-12 m (16.4-39.4 ft) in the air allowing animals and people to move about freely. Total security for the material being conveyed as regards theft. The triangular tubular structure reduces weight of steel by 45%. Rollers serviced by diesel driven trolley running on the structure so no service road is ...
Port of Bourgas
The picture shows the inplant belt conveyor system for the project Bourgas, Bulgaria. Inplant belt conveyor system as part of a complete materials handling system delivered to this port. Port comprises 14 belt conveyors including transfer towers. Each conveyor line for receiving and discharging will be operated separately and/or independently at the same ...
Ubu-ES K6005
The picture shows the inplant belt conveyor system for the project Ubu-ES K6005, Brazil. Inplant belt conveyors for iron ore pelletizing plant. Pelletizing plant comprises 55 belt ...
Port of Immingham
The picture shows the inplant belt conveyor system for the project Immingham, Great Britain. Inplant belt conveyor system as part of a complete coal handling system delivered to this port. Conveyor system comprises 9 belt conveyors including transfer towers, surge bins, belt feeders and rail loading ...
ItaguaÃ-RJ K7014
The picture shows the inplant belt conveyor system for port terminal of project Itaguaí-RJ K7014, Brazil. Port terminal designed to receive and stock iron ore and shipment. Inplant belt conveyor system comprises 12 belt conveyors, 2 apron feeders and sample ...
São Luis-MA K4062
The picture shows the inplant belt conveyor system for port terminal of project São Luis-MA K4062, Brazil. Iron ore port terminal designed to feed the third shiploader. Inplant belt conveyor system port comprises 10 belt ...
Tabas
Underground belt conveyor system for the project Tabas coal mining, Iran. Underground conveyor system comprises 18 belt conveyors. To convey ROM coal and waste material out of ...
West Wallsend
Underground belt conveyor for the project West Wallsend, Australia. Designed to upgrade of underground drift and surface conveyors for West Wallsend colliery in the Hunter Valley. Upgrade which increased the conveying rate from 1 250 t/h to 2 650 t/h was carried out as a ...
Mae Moh V
The picture shows the mine conveyors for the project Mae Moh V, Thailand as part of a complete materials handling system delivered to this open pit mine. Mine conveyors together with 4 semi-mobile crushers and 2 spreaders to be used for for the removal of approx. 500 million cubic meters of overburden to open up the coal seams. Conveyor system comprises 14 belt conveyors - fixed and shiftable conveyors for the transport of the overburden from the mine ...
Continuous haulage system
Continuous haulage system with continuous miner, hopper car and SICON conveyor system for the project VACHS 500, USA. System serves as a permanent connection between the continuous mining machine and the permanently installed underground material handling ...
Punch mining system
Punch mining system consisting of continuous miner and continuous straight line conveyor system. System demonstrates the principle of extremely fast straight line mining coupled with the flexibility of rapid re-covering of the system. All necessary conveyor belt, conveyor structure and stringers are stored inside machine for rapid advance and retreat action. The system is capable of getting relocated around corners via its onboard hydraulic and track ...
Nova Lima-MG K0003
The picture shows the regenerative belt conveyor system for the project Nova Lima-MG K0003, Brazil. Designed to connect the Vargem grande beneficiation plant with Andaime loading station. Comprising apron feeder and 6 belt conveyors. One conveyor is the largest regenerative long distance conveyor in Brazil with 2 493 m (8 179 ft). Level difference of 197 m (646 ...
Brumadinho-MG K7015
The picture shows the regenerative conveyor system for the project Brumadinho-MG K7015, Brazil. Designed to connect the iron ore crusher station to washing system of Corrego do Feijão Mine. Mine comprises 4 belt conveyors. Largest regenerative conveyor with 1130 m (3 707 ft). Level difference of 162.2 m (532 ...
Mariana-MG K5001
The picture shows the regenerative long distance belt conveyor for the project Mariana-MG K5001, Brazil. Downhill regenerative belt conveyor to be designed to connect Alegria 6 mine with beneficiation plant. Level difference of 115 m (377 ...
Mariana-MG K7009
The picture shows the regenerative belt conveyor system for the project Mariana-MG K7009, Brazil. Alegria 9 mine comprises one short belt conveyor and one long distance regenerative (partly) belt conveyor. Regenerative belt conveyor travels across the mountain, where as the drive to be installed on top of the mountain. Level difference of 124 m (407 ...
Conveyors And Conveyor Components - HC-Series Standard Belt Conveyors
Model HC-Series - Standard Belt Conveyors
Sandvik HC-series standard belt conveyors are put together using standardized, completely pre-engineered modules and components. With bolted connections throughout, they can be assembled in various ways to match the application exactly. Available with five belt widths from 500-1200 mm and in lengths from 5-80 m, they are designed for use in crushing and screening stations with capacities of up to 1000 t/h. The HC product range includes wheeled and ...
Conveyors And Conveyor Components - HF-Series Standard Belt Feeders
Model HF-Series - Receiver Belt Feeders
The picture shows a 3D-model of a Sandvik HF-series receiver belt feeder. Wide and adjustable capacity range up to 4000 mtph. Reliable, silent, steady and low raise of dust. For applications where accurate feeding is needed. Easy to assemble, install, operate and service. Tailor-made modules to meet the the application requirements ...
Model HF-Series - Silo Discharge Belt Feeders
The picture shows a 3D-model of a Sandvik HF-series silo discharge belt feeder. Wide and adjustable capacity range up to 4000 mtph. Reliable, silent, steady and low raise of dust. For applications where accurate feeding is needed. Easy to assemble, install, operate and service. Tailor-made modules to meet the application requirements ...
Model HF-Series - Movable Belt Feeders
The picture shows a Sandvik HF-series movable belt feeder in operation. Wide and adjustable capacity range up to 4000 mtph. Reliable, silent, steady and low raise of dust. For applications where accurate feeding is needed. Easy to assemble, install, operate and service. Tailor-made modules to meet the the application requirements ...
Conveyors And Conveyor Components - HL-Series Standard Link Conveyors
Model HL-Series - Standard Link Conveyors
Sandvik HL-series standard link conveyors are put together using standardized, completely pre-engineered modules and components. The standard range of link conveyors covers 2 belt widths (1000 and 1200 mm) each having 2 different lengths (30 and 40 m). The link conveyors have typical capacities for gravel of 800 t/h and 1230 t/h. Design basis of the HL series is Eurocode 1 and ...
Conveyors And Conveyor Components - Rollers
Sandvik - Steel Rollers
Sandvik steel rollers are highly versatile. Different sealing elements and bearings determine which type is suitable for different conditions. With this selection Sandvik steel rollers meet customer requirements even in the most extreme conditions. Loadability of one roller is very much dependable on bearing and shaft diameter. More specific information concerning loadability is found in attached selection ...
Sandvik - Guide Rollers
Sandvik Guiding idlers are designed to prevent belt misalignment in light duty and medium duty conveyors. They are easy to install on both sides of the belt to the steel frame. Sealing and bearing construction are as in steel ...
Sandvik - Model HM110 - Unit Handling Rollers
Sandvik steel rollers are highly versatile. Different sealing elements and bearings determine which type is suitable for different conditions. With this selection Sandvik steel rollers meet special customer requirements even in the most extreme conditions. Loadability of one roller is very much dependable of bearing and shaft diameter. These rollers are meant for Medium duty ...
Sandvik - Disc Return Rollers
Impact rollers are used as carrying rollers instead of normal steel rollers at a loading point. On steel roller there are rubber rings assembled, side by side, to absorb the weight and impact of material falling onto the belt. At the same time impact rollers reduce the schock and vibration through the steel structure. Due to the rubber rings installed onto the steel roller, carryback gets broken and falls out, and roller lasts ...
Metric - Heavy duty - Impact and return rollers
Sandvik Impact rollers are used as carrying rollers instead of normal steel rollers at a loading point. On steel roller there are rubber rings assembled, side by side, to absorb the weight and impact of material falling onto the belt. At the same time impact rollers reduce the shock and vibration through the steel ...
Imperial - Light duty
The imperial range of Sandvik rollers are manufactured in a wide range of sizes from 102mm up to 202mm in diameter. These rollers provide an economical solution to a wide range of applications and are ideally suited for light to medium duty applications in quarrying and ...
Molded End Cap Rollers
The imperial range of Sandvik rollers are manufactured in a wide range of sizes from 102mm up to 202mm in diameter. These rollers are extensively used to handle products such as coal, bauxite, iron ore and nickel ore. Designed to operate for years in the most arduous of ...
Low Noise Rollers
Sandvik manufacture and supply low noise rollers that deliver extensive noise reductions over standard rollers. There are a number of measurements that can be taken with respect to surface profile. Sandvik low noise rollers achieve an excellent Maximum Indicator Slope (MIS) and Total Indicator Reading (TIR) values. As a result of comprehensive testing, it has been identified that the rate of change over the diameter has an influence on the roller ...
Conveyors And Conveyor Components - Frames And Belt Trackers
Roller Brackets
Roller brackets are designed to mount rollers of a flat conveyor, belt conveyors return side and belt ...
Roller Frames
Sandvik manufactures HM300 conveyor frames for belt widths from 400 mm up to 2000 mm (16" to 88") to suit HM100 rollers. Sandvik idlers and frames are designed to maintain an optimum conveyor belt profile which in turn promotes low rolling resistance, excellent belt support, good belt guidance and long belt life. Manufactured with high-grade steel, all Sandvik frames provide minimal gaps between rollers and are designed to counteract ...
Belt Tracking Roller
Sandvik tracking device automatically trains the belt and makes fast corrections in case the belt starts moving sideways - regardless if the reason is misalignment of roller frames, dirty belt or loading to one side of the belt ...
Trackers Return Belt
Tracking of lower belt has an important effect on aligning conveyor belt. Hot-galvanized construction of the tracker gives good protection against ...
Conveyors And Conveyor Components - Pulleys And Take-Up Devices
Light Duty Locking Element Pulleys
This selection always has cone bushing locking devices between shaft and end plate. That construction allows you to dismantle the shaft from pulley for replacement. Loadability is higher than with traditional welded ...
Light Duty Dead Shaft Pulley
Loading capacity of BT-tail and bend pulley is rather high because of the stress reducing ability of bearings which are assembled into deep Dead shaft pulleys have very high load capacity because of the unrotating shaft. This selection is also available ...
Medium Duty Welded Pulleys
Welded pulleys have end plates welded on the shaft on both sides of the plate. Bearings are assembled either with adapter sleeves or locking rings, whether housing is according to DIN standard or made from solid steel ...
Medium duty locking element pulleys
This selection always has cone bushing locking devices between shaft and end plate. The construction allows you to dismantle the shaft from pulley for replacement. Loadability is higher than with traditional welded ...
Medium duty dead shaft pulley
Dead shaft pulleys have very high loadability capacity because of the unrotating shaft. This selection is also available as ...
Conveyors And Conveyor Components - Belt Cleaners
Light duty primary cleaners
Universal and economical cleaner with very wide operating area. They are easy to install and maintain. Can be equipped with several different blade ...
Light duty fines cleaners
Compact cleaner designed for crushing plant conveyors. ...
Medium duty primary cleaners
Pre cleaners are designed to be installed at the head pulley to remove the bulk of carryback adhering to the belt after the natural trajectory of the conveyor has released the product. Sandvik"s range of pre cleaners are efficient and low maintenance units that will give outstanding service life in the most arduous ...
Medium duty secondary cleaners
Fine cleaners/secondary cleaners are designed to be installed immediately after the head pulley to remove the fine carryback adhering to the belt. Sandvik"s range of fine cleaners are also available to suit reversing conveyors and are can be fitted with an optional spraypole for additional ...
Medium duty brush-type cleaners
Belt brush is sometimes the only choice, when material is fine, dry and pulverized or with nipper or rib belts. Construction is a space saver, due to compact drum motor drive, which is also easy to maintain. Diverse mounting parts allow installing onto different structures. Wear parts can be replaced easily, onto pulled out aluminium ...
Medium duty air knife
When material is sticky or contains wet and belt has already seen its best days, cleaning with pressurized air is one of the best solutions. This cleaner can be connected to a pressurized air system or use by an own ...
Heavy duty primary cleaners
Pre cleaners are designed to be installed at the head pulley to remove the bulk of carryback adhering to the belt after the natural trajectory of the conveyor has released the product. Sandvik"s range of pre cleaners are efficient and low maintenance units that will give outstanding service life in the most arduous ...
Heavy duty secondary cleaners
Fine cleaners/secondary cleaners are designed to be installed immediately after the head pulley to remove the fine carryback adhering to the belt. Sandvik"s range of heavy duty fine cleaners are designed for high capacity belts that require a heavy duty cleaner. These cleaners are also available to suit reversing conveyors and can be fitted with an optional spraypole for additional ...
Vibrating Idlers
Patterned belts can be cleaned with vibrating idlers, which are usually installed to the clean side of the belt. When pattern is less than 10 mm, it is allowed to be installed also to the material ...
Pulley Cleaners
To prevent drop material getting between belt and pulley and cause in worst case ripping of the belt, can pay back in no time. Selection of pulley cleaners are designed to be used with Sandvik ...
Conveyors And Conveyor Components - Safety And Control Devices
Emergency Devices
Emergency devices from Sandvik enhances safety around a conveyor by stopping a conveyor in case of an accident. These emergency devices are based on the European standard EN620 and EN418 of the bulk handling conveyors. All devices are tested in the harsh climatic conditions in Scandinavia and can be ordered and operated ...
Warning Devices
Warning devices from Sandvik are taking care of the conveyor and first of all the most expensive part of the conveyor, belt. The best guarantee for a trouble-free and economical operation is to prevent damages that might eventually happen in operation. This selection of warning devices are designed to either stop the conveyor or just inform of the damages. These warning devices are based on the European standard EN620 and EN418 of the bulk handling ...
Safety Nets
Safety nets are used for protection against injuries which are caused when people get access to open gaps while working around a conveyor. Welded wire net, which is installed far enough from moving parts, obstruct to reach them, without uninstalling the ...
Hatches
Hatches can to be installed on chute, not only for inspection but also for maintenance of components inside. Different hatches are used in different applications. When using the inspection hatch in places where there is a risk of injuries, e.g. in bucket elevators, a hatch with a protective steel wire mesh must be ...
Conveyors And Conveyor Components - Dust Suppression And Loading Sections
Model HX410 - Dust suppression systems
Former name: Roxon Clear The HX410 dust suppression system is designed for use at material transfer points of belt conveying systems. The functional principle is that of an electrostatic filter. It is based on the physical principle of separation by ...
Rotary Blasthole Drill Rigs
D25KS
The Sandvik D25KS is a diesel powered, self propelled crawler mounted blasthole drill rig for mining and large-scale quarrying. Thanks to its compact size and powerful undercarriage it is a very stable and highly maneuverable surface ...
D245S
The Sandvik D245S is a diesel powered, self-propelled crawler mounted blasthole drill for mining and quarrying. It delivers the most performance from a compact production ...
D45KS
The Sandvik D45KS is a diesel powered, self propelled crawler mounted blasthole drill for surface mining. It is a mid-range production drill, standard machine is equipped for low pressure air and rotary ...
D50KS
The Sandvik D50KS is a diesel powered self propelled crawler mounted blasthole drill for surface mining. Thanks to its heavy duty hydraulic system, it delivers the rotary horsepower for maximum productivity throughout its hole size ...
D55SP
The Sandvik D55SP is a diesel powered self propelled crawler mounted blasthole drill for surface mining. In low or optional high pressure configuration, it is the most productive rig for bench heights where single pass drilling can be ...
D75KS
The Sandvik D75KS is a diesel powered self propelled crawler mounted blasthole drill for surface mining. It has a rugged and time proven design ideal for multipass drilling of benches, such as stripping coal or surface metal ...
D90KS
The Sandvik D90KS is a diesel powered self propelled crawler mounted blasthole drill for surface mining. It is exceptionally operator friendly and has a solid record of reliability, proven at high altitude and in the harshest desert and arctic ...
1190E
The Sandvik 1190E is an electrically powered, self -propelled crawler mounted blasthole drill rig for surface mining. Its has a heavy duty undercarriage that maximizes longevity and stability gives long service life and great ...
DR460
The DR460 is a diesel powered, self-propelled crawler mounted rotary blasthole drill for surface mining. It is designed for mines prioritizing high penetration rate, easy maintenance, good availability and an ergonomic work ...
Water Well Drill Rigs
Model T25KW - Water Well Drill Rigs
Sandvik T25KW is a truck-mounted, top-drive waterwell drill. It has a powerful deck engine and high pressure air compressor for heavy-duty down-the-hole drilling. The T25KW is an ideal choice for contractors working with hard rock formations and requiring maximum ...
Compact Range
Sandvik's compact range of hydraulic hammers represent a gaint leap forward in breaking technology. Consisting of four highly versatile models, with patented and integrated mounting brackets, the compact range can accommodate pin bracket or quick-hitch mounting systems. The compact range is compatible with a wide range of oil flows and can be mounted on virtually any mini excavator or skid steer loader, making them ideally suited for multiple-carrier ...
Small Range
All models in Sandvik's Small Range of breakers are offered in a variety of standard, uniram and city mounting configurations. They can be mounted on a huge range of carriers and utilized in a infinite number of ...
BR111, BR222 and BR333
Sandvik's BR111, BR222 and BR333 models combine simplicity and cost-effectiveness with a class-leading power to weight ratio that is optimised for demolition and recycling applications. The three models match carriers in the 0.8 to 4.0 ton (1800-8800 lb) range, and all three breakers utilize a streamlined and lightweight design that sets a new standard in low weight and high ...
Mid Modular Range
Sandvik's Mid Modular hammer range has been based on a modular design, with each modular designed to meet it's own criteria and technical solution. Excellent durability is a achieved with less weight, providing the unique series with the best power to weight ratio on the ...
Mid Range
Sandvik's Mid Range of hydraulic hammer incorporates a piston and tool that are perfectly matched to ensure maximum energy transfer for optimum power and breaking efficiency. The two brand new models that make up this range can be adapted to suit any ...
Large Range
The use of advanced hydraulics, materials technology, strength calculations, impact wave theory and production technology have enabled to create hammers that are powerful, durable, cost-effective and the undisputed leaders in their ...
Special Features
Hydraulic hammers have many special features designed to make working and operating easier and faster. The special features can be combined in several ways to create a solution that suits customer ...