Solinst Canada Ltd.

68 products found

products

  • Level Measurement Devices

  • Solinst - Model 101 - Water Level Meters

    Solinst - Model 101 - Water Level Meters

    The Solinst 101 Water Level Meter with P7 Probe features an extremely durable, laser marked PVDF flat tape, with an enhanced dog bone design that is thicker, reducing adherence to the side of well...

  • Solinst - Model 122 - Oil/Water Interface Meters

    Solinst - Model 122 - Oil/Water Interface Meters

    Solinst Model 122 Interface Meters are easy-to-use and give reliable, accurate measurements. A steady tone and light indicate LNAPL or DNAPL. Intermittent signals indicate water. Solinst laser marked PVDF flat-tape is available in lengths up to 1000 ft or 300 m. The PVDF Flat Tape is considerably more...

  • Solinst - Model 107 - TLC Meter (Temperature, Level, Conductivity)

    Solinst - Model 107 - TLC Meter (Temperature, Level, Conductivity)

    A Solinst TLC Meter provides accurate, stable temperature and conductivity measurements displayed on a convenient rotating LCD display. Water level measurements are taken from permanently marked flat-tape, every 1/100ft (mm) up to 300ft. (100 m). Tape is flexible and hangs straight in application. Meter is ideal for temperature and conductivity profiling in wells or open water, and for a general indication of chemical contamination levels and...

  • Solinst - Model 103 - Tag Line Used to Measure Louisiana Sinkhole

    Solinst - Model 103 - Tag Line Used to Measure Louisiana Sinkhole

    The Solinst Model 103 Tag Line uses a weight attached to a laser marked cable, which is mounted on a sturdy free-standing reel. The 1/16' (1.6 mm) stranded stainless steel wire line is primarily used during the installation of monitoring wells to measure depth to the bottom of a well, or the...

  • Solinst - Model 101 P7 - Laser Marked Water Level Meter

    Solinst - Model 101 P7 - Laser Marked Water Level Meter

    The Model 101 P7 Water Level Meter uses extremely durable PVDF Solinst laser marked flat tape, accurately etched every 1/100 ft or millimeter, certified traceable to National Standards. The tape features a thick dog bone design, reducing adherence to well casings, and has high tensile strength and electrical efficiency. The Meter has a P7 pressure-proof probe designed for submergence to 1000 ft (300 m). The sensor at the tip of the probe provides...

  • Solinst - Model 122M - Mini Oil/Water Interface Meters

    Solinst - Model 122M - Mini Oil/Water Interface Meters

    Solinst Mini Oil/Water Interface Meters give clear and accurate measurements of product level and thickness in wells and tanks. Determination of both light (floating) non-aqueous phase liquids (LNAPL) and dense (sinking) non-aqueous phase liquids (DNAPL) is quick and easy.

  • Data Loggers & Telemetry

  • Solinst Levelogger Edge - Model 3001 - Water Level Dataloggers

    Solinst Levelogger Edge - Model 3001 - Water Level Dataloggers

    The Levelogger Edge is a self contained water level datalogger, using infra-red data transfer powered by a 10 year lithium battery, offering the flexibility of installing by use of a Direct Read Cable, wireline or Kevlar cord. The Levelogger Edge has a memory capacity of 40,000 temperature and water level data points, or up to 120,000 using the compression algorithm in linear sampling mode. Levelogger Software Version 4.0, written to support the...

  • Solinst Levelogger Junior - Model 3001 - Water Level Dataloggers

    Solinst Levelogger Junior - Model 3001 - Water Level Dataloggers

    The Levelogger Junior Edge provides an inexpensive alternative for measuring groundwater and surface water levels and temperature. The Levelogger Junior Edge combines a pressure sensor, temperature detector, a datalogger, and 5-year battery (based on a...

  • Solinst Levelogger Junior - Model 3001 - Water Level, Temperature and Conductivity Dataloggers

    Solinst Levelogger Junior - Model 3001 - Water Level, Temperature and Conductivity Dataloggers

    The LTC Levelogger Junior provides the convenience of conductivity, temperature, and water level measurements in one instrument. The LTC Levelogger Junior combines a data logger, 5-year battery, pressure transducer, temperature and conductivity sensors in a small waterproof stainless steel housing, 7/8' x 7.5' (22 mm x 190 mm). Compatible with Levelogger Gold software and accessories. Calibration is quick and easy.

  • Solinst Rainlogger Edge - Model 3002 - Rain Gauge Datalogger

    Solinst Rainlogger Edge - Model 3002 - Rain Gauge Datalogger

    The Rainlogger Edge is an inexpensive datalogger designed to record the tips of a standard tipping-bucket rain gauge with a normally-open style reed switch output. This compact and durable field unit offers long-term reliability and convenience with a battery that lasts up to 10 years, and improved ESD (electrostatic discharge) protection with an ABS housing.

  • Solinst - Model 9100 STS - Telemetry System

    Solinst - Model 9100 STS - Telemetry System

    Solinst Telemetry Systems are designed for use with the Solinst Levelogger Series of dataloggers. They offer two-way communication and control from your own desktop. You choose the Levelogger, the best communication method to suit your site, access the intuitive...

  • Solinst - Model 3001 - Levelogger App Interface

    Solinst - Model 3001 - Levelogger App Interface

    The Levelogger App Interface uses wireless Bluetooth technology to communicate to your iOS 7 smart device. Use our Levelogger App Interface and a Solinst Direct Read Cable, to communicate to a downhole Levelogger and email data files right from the field.

  • Solinst - Model 3500 AquaVent™ - Vented Water Level Datalogger

    Solinst - Model 3500 AquaVent™ - Vented Water Level Datalogger

    The NEW Solinst AquaVent is designed to be maintenance free, using hydrophobic filters and permanent factory installed desiccants, with convenient user replaceable wellhead batteries and custom designed durable vented cable. The AquaVent features highly accurate gauged pressure sensor, temperature sensor and datalogger.

  • Multilevel Systems & Remediation Devices

  • Solinst CMT - Model 403 - Continuous Multichannel Tubing

    Solinst CMT - Model 403 - Continuous Multichannel Tubing

    CMT Multilevel System consists of 7 discrete zones. Zones are packed off using bentonite to eliminate vertical contamination between sand packed sampling ports. Depth discrete data obtained from CMT increases risk assessment accuracy, improves decision making, optimizes performance of site remediation, and provides vertical hydraulic head data for model calibration. Narrow 3-channel option as well.

  • Solinst Waterloo - Model 401 - Multilevel Groundwater Monitoring System

    Solinst Waterloo - Model 401 - Multilevel Groundwater Monitoring System

    The Waterloo System is used to obtain groundwater samples, hydraulic head measurements, and permeability measurements from up to 7 discretely isolated zones in a single borehole. They provide 3D data of contaminant flow and concentrations, cost savings through fewer drilled holes, and accurate data for site interpretation and assessment. Systems are customized to meet the needs of each product.

  • Waterloo Emitter - Model 703 - Enhanced Bioremediation Device

    Waterloo Emitter - Model 703 - Enhanced Bioremediation Device

    The Waterloo Emitter is a simple, low cost device designed for the bioremediation of contaminated groundwater. Sized to fit 2', 4' and 6' (50, 100 and 150 mm) wells and boreholes, can be installed in stacks vertically or horizontally to ensure full coverage of the contaminant plume. The controlled release of oxygen and various other amendments encourage and sustain the growth of microorganisms required for bioremediation.

  • Groundwater Samplers

  • Solinst - Model 410 - Peristaltic Pump

    Solinst - Model 410 - Peristaltic Pump

    Designed for field use, the reversible flow Peristaltic Pump from Solinst is ideal for vapor sampling or water sampling from shallow wells and surface water. It can be used for vacuum pumping and for pressure delivery of liquids or gases.

  • Solinst - Model 407 - Pneumatically Controlled Groundwater Bladder Pump

    Solinst - Model 407 - Pneumatically Controlled Groundwater Bladder Pump

    The Solinst Bladder Pump allows consistent, high quality samples in all types of applications. It offers excellent performance and reliability. With Solinst Bladder Pumps there is the assurance that there is no air/water contact during sampling. It meets the most rigorous US EPA...

  • Solinst - Model 408 - Double Valve Pump

    Solinst - Model 408 - Double Valve Pump

    The Solinst Double Valve Pump (DVP) is a pneumatic drive pump that allows consistent, high quality samples. It has been field proven in thousands of applications.

  • Solinst - Model 408M - Micro Double Valve Pump

    Solinst - Model 408M - Micro Double Valve Pump

    The Micro Double Valve Pump has a remarkably small and flexible design. It is a pneumatic pump that uses coaxial PTFE tubing to give high quality samples. At 3/8' (10 mm) diameter, it is small enough to fit in 1/2' (13 mm) ID tubing such as in Waterloo Multilevel System 5/8' open tubes, as well as channels of the 

  • Solinst - Model 404 - Reliable Inertial Pump

    Solinst - Model 404 - Reliable Inertial Pump

    The Inertial Pump is a simple, reliable inertial pump that provides a cost effective sampling option for groundwater monitoring. The Pump consists of a riser tube fitted with a one-way foot valve. It can be easily operated manually, or by using a surface pumping mechanism. The tubing and foot valves come in...

  • Solinst - Model 425 - Discrete Interval Samplers

    Solinst - Model 425 - Discrete Interval Samplers

    The Model 425 Discrete Interval Sampler is a stainless steel groundwater sampler, with LDPE tubing mounted on a convenient reel. Discrete interval sampling is ideal for obtaining truly representative groundwater samples from below floating product layers, or for obtaining samples of the product itself. The Discrete Interval Sampler can also be used to profile open bodies of water, boreholes, and to collect...

  • Solinst - Model 429 - Point Source Bailer

    Solinst - Model 429 - Point Source Bailer

    Point source sampling is ideal for obtaining high quality, representative samples of groundwater from specific depths. It allows the collection of water that has just flowed into a well at the desired sampling point. This can avoid purging and disposal of purged water.

  • Solinst - Model 428 BioBailer™ - Biodegradable Transparent Bailer

    Solinst - Model 428 BioBailer™ - Biodegradable Transparent Bailer

    The Model 428 BioBailer™ is a low cost, biodegradable bailer, made of clear PVC. The rigid body is easy to handle and the dense PVC design eliminates the need to use weights in most groundwater sampling applications. It is available in 1.5' and ¾' diameters, which hold more than 1025 mL and...

  • Solinst - Model 800 - Low Pressure Pneumatic Packers

    Solinst - Model 800 - Low Pressure Pneumatic Packers

    Solinst Low Pressure Pneumatic Packers are available in two sizes, as single or straddle packers primarily for use in 2' to 5' monitoring wells (50 and 125 mm). They can be inflated using a hand pump to a maximum of up to 50 psi (345 kPa).

  • Solinst - Model 860 - Disposable In-Line Filters

    Solinst - Model 860 - Disposable In-Line Filters

    Solinst supplies in-line disposable filters specifically designed for the preparation of groundwater samples for dissolved metals analysis and for filtering large volumes of turbid groundwater. These filters are any easy effective way to meet the filtration requirements of the US EPA, as they incorporate a 0.45μm membrane into a disposable device.

  • Solinst - Model 464 - Electronic Pneumatic Pump Control Units

    Solinst - Model 464 - Electronic Pneumatic Pump Control Units

    The Model 464 Electronic Control Unit is available in 125 psi or 250 psi versions, and uses 4 AA alkaline batteries that last up to 100 hours of normal use. These Controllers can also be operated manually, using only a compressed gas source.

  • Direct-Push Equipment

  • Solinst - Model 601 - Standpipe Piezometer

    Solinst - Model 601 - Standpipe Piezometer

    The Solinst Model 601 Standpipe Piezometer is designed to be placed within a drilled hole to provide a filtered inlet point. The pointed PVC tip is also suitable for pushing into very loose sands at the base of a borehole, a stream, or into very loose tailings pond sediments.

  • Solinst - Model 660 - Drive-Point Profiler

    Solinst - Model 660 - Drive-Point Profiler

    The Model 660 Profiler is designed to collect samples from multiple points in a single drive/drilling location, at discrete zones. It allows contaminant vs. depth profiling and detailed plume delineation. The profiler has a 1.75' (45 cm) dia. AW stainless steel tip with one row of screened inlet holes set circumferentially; holes lead to single stainless steel, LDPE, or Teflon sample line.

  • LevelSender - Model 9500 - Telemetry

    LevelSender - Model 9500 - Telemetry

    Eliminate going to the field to download your Levelogger data. Quickly and easily add cellular telemetry to your Levelogger monitoring wells. The NEW LevelSender is designed to connect to Direct Read Cables and Leveloggers, upgrading your current installation by adding cellular telemetry at an affordable price. The LevelSender is compact in design, and is simple to setup and maintain. Leverage your current Levelogger assets and increase your...

Products by Geokon Inc

  • Strain Gages

  • Geokon - Model 3900 - Dynamic Embedment Strain Gages

    Geokon - Model 3900 - Dynamic Embedment Strain Gages

    The Model 3900 Embedment Strain Gage is designed for the measurement of dynamic strains in concrete structures, earth fills and soils. It comprises a full bridge strain gaged proving ring coupled, between two flanges, with a spring and shaft. When the flanges move relative to one another, the tension in the spring changes and hence the strain in the proving ring. A PVC tube serves as a protective housing and holds the gage at the desired initial...

  • Model 4000 VW - Arc Weldable Strain Gage

    Model 4000 VW - Arc Weldable Strain Gage

    The Model 4000 Strain Gage is designed primarily for arc welding to steel structures such as tunnel linings, excavation bracing, piles and bridges. The gage has a 150 mm gage length (longer or shorter versions are also available), a 3000 µε range and a 1 µε sensitivity. The gage can be adapted for bonding to concrete or for bolting to steel surfaces by modification of the end blocks.

  • Displacement Transducers

  • Geokon - Model 4400 VW - Embedment Jointmeters

    Geokon - Model 4400 VW - Embedment Jointmeters

    The Model 4400 Embedment Jointmeter is designed for use across construction joints, such as those between adjacent blocks in a concrete dam. It is normally embedded across the joint to monitor the expansion or contraction of the joint. The use of internal universal joints allows for a degree of shearing motion.

  • Model 4410 VW - Strandmeters

    Model 4410 VW - Strandmeters

    The Model 4410 Strandmeter is designed to measure strains in tendons and steel cables. Two clamps at each end of the strandmeter hold it firmly onto the cable. Various size clamps are available.

  • Extensometers

  • Model 1050 (A-1) - Single Position Rod Extensometer

    Model 1050 (A-1) - Single Position Rod Extensometer

    The Model A-1 Single Position Rod Extensometer is a very simple, rugged and reliable instrument, easily installed and completely recessed within the borehole for optimum protection. The Model A-1 is a natural first choice for monitoring the safety in and around tunnels and mine openings. Options are also available with electrical transducers for remote readout and/or continuous monitoring

  • Geokon - Piezometers

  • Geokon - Model 3400 - Semiconductor Piezometers

    Geokon - Model 3400 - Semiconductor Piezometers

    The Model 3400 Semiconductor Piezometers and Pressure Transducers are intended for dynamic measurements of fluid and/or pore water pressures in standpipes, boreholes, embankments, pipelines, pressure vessels, reservoirs, etc. They are also used for static pressure movement where the readout system is incompatible with vibrating wire type transducers. Three transducer output options are available.

  • Settlement Sensors

  • Geokon - Model 4600 (M) -VW - Subsurface Settlement Sensor

    Geokon - Model 4600 (M) -VW - Subsurface Settlement Sensor

    The Model 4600 Settlement System is designed for the remote measurement of surface or subsurface settlement in fills, surcharges, dams, embankments, etc. A borehole is drilled which allows a pressure transducer to be anchored to solid ground below the area of settlement. A fluid filled tube extends upward connecting the transducer to a reservoir which is located in the moving strata or fill. The measurement of fluid pressure indicates the elevation...

  • Pressure Cells

  • Model 4800 VW - Earth Pressure Cells

    Model 4800 VW - Earth Pressure Cells

    The Model 4800 Earth Pressure Cells are designed to measure total pressure in earth fills and embankments. All cells consist of two circular stainless steel plates welded together around their periphery and spaced apart by a narrow cavity filled with de-aired oil. Changing earth pressure squeezes the two plates together causing a corresponding increase of fluid pressure inside the cell. A vibrating wire pressure transducer converts this pressure into...

  • Load Cells

  • Model 4900 - Load Cells

    Model 4900 - Load Cells

    The Model 4900 Vibrating Wire Load Cell consists of a cylinder of high-strength steel with 3, 4 or 6 vibrating wire strain gages located around the circumference of the cell. Loads applied to the cell are measured by the vibrating wire strain gages. The effects of uneven and eccentric loading are minimized by averaging the output of all 3, 4 or 6 individual readings.

  • Inclinometers

  • MEMS - Model GK-604D - Digital Inclinometer System

    MEMS - Model GK-604D - Digital Inclinometer System

    The Model GK-604D Digital Inclinometer System is delivered in its entirety and includes a Model 6100D Digital Inclinometer Probe, a reel-mounted cable and a Field PC. The Model 6100D contains electronics to convert the analog voltage into a digital signal, which is transmitted by the control cable to the cable reel containing the Interface, which communicates via Bluetooth® to the Model FPC-1 Field PC. A Digital Compass is built into the...

  • Tiltmeters - Pendulums

  • MEMS - Model 6101D - Digital Tiltmeter

    MEMS - Model 6101D - Digital Tiltmeter

    The Model 6101D MEMS Digital Tiltmeter is a low-cost, portable device designed to measure tilt in structures such as buildings, dams and embankments and also for measurements related to the stability of slopes, open pits and the walls of excavations (e.g. slurry walls). The sensing element is a highly accurate MEMS (Micro-Electro-Mechanical Systems) tilt sensor, which communicates with the Model FPC-1 Field PC Readout via Bluetooth.

Products by Waterra USA Inc.

  • Waterra - Clear PVC EcoBailer

    Waterra - Clear PVC EcoBailer

    The Waterra Clear PVC EcoBailer is an eco-friendly product that is as heavy (or heavier) than conventional weighted bailers without the addition of bulky and costly weights. A better weight distribution allows the Waterra Clear PVC EcoBailer to sink straighter and the efficient valve design makes it the fastest sinking bailer available.

  • Locking Well Caps

    Locking Well Caps

    Waterra stocks two different types of locking environmental wells caps. Both of these devices have a number of unique features that customers find useful and convenient. The EcoPlug™ offers affordability with a more conventional design, but includes the largest sealing gasket of any plug available. The Enviro Cap™ is unique with its internal, magnetically engaged locking system — making it particularly difficult to tamper with....

  • Inertial Pumps

    The Waterra Inertial Pump was developed in Canada in the 1980's when it was realized that the was a demand for an efficient, reliable and inexpensive pump suitable for purging and sampling groundwater monitoring wells. The Waterra Inertial pump embodies all three of these characteristics. It's simplicity has allowed it to be adapted to a wide variety of sizes, making it suitable for numerous applications. It will also perform well in harsh environments that would ruin other more expensive pumps

  • Standard Flow System

    Standard Flow System

    The Standard Flow System is the most popular inertial pump. This system is best suited for 1” to 2” ID monitoring wells and can provide lifts of 150 to 200 feet. Flow rates can be as much as 1 gallon per minute.The system consists of two components – a Standard Flow foot valve and a length of 5/8' OD Standard Flow high density polyethylene (HDPE) tubing.

  • Lever Pump

    Lever Pump

    The Waterra Lever Pump was designed to provide operators with a convenient, portable mechanism which would provide some mechanical advantage when manually operating the Inertial Pump as well as facilitating the collection of samples with this system.This actuator is the best choice for the occasional light duty user of the Inertial Pumping System.

  • HYDROLIFT - Model 2  - Manual & Automated Pump Actuators

    HYDROLIFT - Model 2 - Manual & Automated Pump Actuators

    The Hydrolift-2 is a portable, electrically operated device that is used to automate the operation of the Inertial Pump. The Hydrolift is powered by a 3/4 horsepower electric motor (available in either 110 volt or 220 volt) and generates a 4 inch stroke at up to 200 cycles per minute. The Hydrolift II weighs only 35 pounds and...

  • POWERPACK - Model PP1  - Manual & Automated Pump Actuators

    POWERPACK - Model PP1 - Manual & Automated Pump Actuators

    This actuator is an excellent choice for those with moderate pumping requirements.The Waterra PowerPack PP1 provides the mechanical actuation for pumping with inertial pumps to depths of over 60m, in a fully portable, single operator power unit. At 13 kg, the PowerPack PP1 provides outstanding pumping performance.

  • POWERPUMP - Model 2  - Manual & Automated Pump Actuators

    POWERPUMP - Model 2 - Manual & Automated Pump Actuators

    This actuator is an excellent choice for those with extreme pumping requirements.The Waterra PowerPump-2 is the most powerful pump actuator manufactured by Waterra. A Honda GX100, 3 horsepower, 4 stroke, gasoline motor powers this device.This actuator generates a 6 inch stroke and can operate both the Standard Flow System and High Flow System to their maximum effective depths. The PowerPump 2 weighs 70 pounds and usually requires two people to carry...

  • Model D-32 - Plastic Valve

    Model D-32 - Plastic Valve

    The High Flow System is designed to be used in 2 inch wells or larger where a high pumping rate is desired or where very deep wells are encountered. This system is also an excellent well development tool in 2 inch piezometers. Consisting of a High Flow valve, either the 1.25' OD, acetal plastic D-32 or the stainless steel SS-32 and a length of 1' OD high density polyethylene (HDPE) tubing, the High Flow system can provide lift of up to 250-300 feet in...

  • Model D-13 - Plastic Valve

    Model D-13 - Plastic Valve

    The Low Flow System is designed to be used in small diameter piezometers (usually 1.5' ID to 0.75' ID). It can provide flow rates of up to 1/2 gallon per minute and can lift water from up to 100 feet. This system consists of a low flow valve, either the acetal plastic D-13 foot valve or the stainless steel SS-13 foot valve and HDPE, LDPE or FEP (Teflon) tubing.

  • Model SS-10 - Stainless Steel Valve

    Model SS-10 - Stainless Steel Valve

    The Micro Flow System is popular for use in direct push technology micro well installations and multi-level installations. The SS-10 foot valve can deliver a sample from as deep as 75 feet and flow rates with this system are usually less than 1/2 gallon per minute.

  • Tubing: HDPE / LDPE

    Tubing: HDPE / LDPE

    High Density Tubing provides the best performance in deeper monitoring wells because of it's rigidity. This tubing will also stretch less in deeper monitoring wells making it more efficient. High Density Polyethylene also provides a stronger valve-tubing connection, especially with the male threaded valves, because it is stiffer and gives less when the valve is threaded into the tubing.

  • Tubing: TPE (Thermoplastic Elastomer)

    Tubing: TPE (Thermoplastic Elastomer)

    Thermoplastic Elastomer (TPE) is a soft and flexible polymer with excellent physical properties,making it a good alternative for silicone tubing in peristaltic pumps. Waterra stocks tubing sizes L/S 15 and L/S 24 for use in the Spectra Field Pro Peristaltic Pump.

  • Tubing: FEP

    Tubing: FEP

    FEP is one of three different types of of Teflon manufactured by Dupont and is the best choice of material for use in tubing. It is a chemically-inert, temperature and chemically resistant tubing product that, with good transparency and weatherability.

  • Waterra Valve Wrench

    Waterra Valve Wrench

    The Waterra Valve Wrench is a handy tool which helps ensure that your foot valve is properly installed on the pump tubing. The Waterra Inertial Pump can develop considerable pressure and by attaching your valves with the valve wrench you can be sure that they are properly connected.

  • Tools & Accessories: Tubing Cutter

    Tools & Accessories: Tubing Cutter

    The Waterra Tubing Cutter is a safe and efficient way to cut tubing. The durable Teflon coated blade slices through HDPE tubing cleanly and easily.

  • Standard Flow 2 Surge Block

    Standard Flow 2 Surge Block

    The Waterra Surge Block is an excellent well development tool. It simply press fits over the body of the Standard Flow or High Flow foot valve (D-25 or D-32). The inertial pump has a substantial capacity for developing monitoring wells because of the cyclical action of the valve in the well screen area. This characteristic can be utilized to remove silt and sediment that has accumulated in the foot of the monitoring well and can also be used to remove...

  • Model D-25 - Plastic Valve

    Model D-25 - Plastic Valve

    This is the standard valve component for the Waterra Standard Flow inertial pump. Simply screw this valve on to the base of our 5/8' Waterra HDPE tubing and you have a fully functional inertial pump. Material: Delrin, Maximum Depth: 150', Tubing Size: 5/8' OD.

  • Model D-16 - Plastic Valve

    Model D-16 - Plastic Valve

    This is the standard valve component for the Waterra Standard Flow inertial pump. Simply screw this valve on to the base of our 5/8' Waterra HDPE tubing and you have a fully functional inertial pump. Minimum well diameter: 1'

  • Filters

  • Waterra - Model FHT-45 - Disposable Groundwater Filters

    Waterra - Model FHT-45 - Disposable Groundwater Filters

    The Waterra FHT-45 offers the user the most surface area available in capsule type filters today. The unique open pleat geometry and 600 square cm surface area provide the maximum media exposure while ensuring that even with the most turbid samples, you will not lose filtration media to blinding.

  • Model FMT-45 - Disposable Groundwater Filters

    Model FMT-45 - Disposable Groundwater Filters

    The NEW medium turbidity Waterra FMT-45 has all of the great features of the Waterra FHT-45, but with a reduced surface area at 300 sq. cm. These filters provide an economical alternative for lower turbidity sampling, when the highest possible capacity is not required.

  • Submersible Pumps

  • Cyclone - Model WSP-12V-1 - Plastic Submersible Pump

    Cyclone - Model WSP-12V-1 - Plastic Submersible Pump

    12 volt engineered plastic submersible pump.The WSP-12V-1 Cyclone pump is capable of pumping up to 25 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

  • Mini-Typhoon - Model WSP-12V-2M - Plastic Submersible Pump

    Mini-Typhoon - Model WSP-12V-2M - Plastic Submersible Pump

    12 volt engineered plastic submersible pump.The WSP-12V-2M Mini-Typhoon® pump is capable of pumping up to 40 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

Products by ESP, Environmental Service Products

  • BioBailer™ - Biodegradable - Disposable Groundwater Bailers

    BioBailer™ - Biodegradable - Disposable Groundwater Bailers

    BioBailers are standard disposable bailers used for groundwater bore sampling but with the added benefit of being biodegradable* when discarded into a landfill. As people who care for the environment, it makes little sense to use a single use plastic bailer to sample and monitor the quality of our environmental water, then throw the item away to remain in a land fill for 100’s of years or more.  Let’s not be solving one problem only...

  • BioLiner™ - Biodegradable – Disposable Soil Sampling Liners

    BioLiner™ - Biodegradable – Disposable Soil Sampling Liners

    Soil sample liners are similar to bailers.  They are disposable plastic tubes used to collect a soil sample as opposed to a water sample.  The soil sampling liners are used in direct push type rigs to collect a soil profile.  As the sampling tool is driven into the ground the soil is extruded inside the liner.  Once the sample tool is retrieved the liner is withdrawn for examination of the sample.  The liners are then normally...