Young Calibration Ltd

Young Calibration Ltd

premium

23 services found

Services

  • Calibration Services - Traceable and UKAS Accredited

  • Airflow Calibration Services

    Airflow Calibration Services

    Air flow and gas flow meter calibration services for the automotive, aviation, medical, environmental, pharmaceutical and process instrumentation industries. The temperature controlled laboratory is UKAS accredited (Lab 0604) for air flow calibration on both volume flow and mass flow and for both rate and quantity passed measurement. Flow passed is otherwise referred to as batch or total flow measurement and is a regular type of flow measurement...

  • Oil Flow Calibration Services

    Oil Flow Calibration Services

    Leading provider of oil flow meter calibrations, the Young Calibration hydrocarbon flow calibration facility offers oil meter calibration over a range of different oils and fuels and at at varying fluid temperature and viscosity to allow for slippage and thermal expansion events. The four traceable calibration rigs allow for fluids to be permanently online with stocked popular fluids for the hydraulics, aviation, automotive and motorsport sectors. Two...

  • Water Flow Calibration Services

    Water Flow Calibration Services

    Young Calibration are a leading provider of water meter calibration services, with eight calibration rigs, offering a cost effective and quality service, ideal for verifying and calibrating low cost water utility and test flow meters to MID Class 2 and 3, BS5728 and ISO 9000 to high accuracy ISO/IEC 17025 accredited calibrations on coriolis and turbine flowmeters. All rigs have full traceability back to National standards with two rigs being UKAS...

  • Air Velocity Calibration Services

    Air Velocity Calibration Services

    Air velocity calibration and anemometer calibration services are undertaken in the laboratories' universal UKAS accredited wind tunnels, offering extreme accuracy in both low and high speed operating modes. All types of anemometers and wind speed instruments can be calibrated. The facility can offer independent, UKAS accredited air velocity calibration for all types of pitot static tubes, probes, vanes, rotating cup and general anemometers....

  • Pressure Calibration Services

    Pressure Calibration Services

    Our UKAS pressure calibration laboratory is equipped with a range of precision pressure balances, dead weight testers, digital calibrators and digital barometers enabling the company to offer pneumatic, gas, hydraulic and oxygen clean pressure gauge calibration. Our UKAS accredited pressure range covers both absolute and gauge measurement from -0.9 to 35 bar for pneumatic gauge pressure, up to 1100 bar hydraulic gauge pressure and 0.01 to 36 barA for...

  • Temperature Calibration Services

    Temperature Calibration Services

    The temperature calibration laboratory offers independent calibration service for temperature probes, thermocouples, loggers, RTD probes, infra red meters, IR thermometers, thermal imaging cameras, thermistors, glass thermometers, transmitters, dry block calibrators, liquid baths, temperature controllers and displays. All makes and models from any manufacturer can be calibrated traceable to national standards with certification report generated to the...

  • Electrical Calibration Services

    Electrical Calibration Services

    The Electrical Test Laboratory caters for all types of general purpose electrical test equipment, 17th/18th edition electrical testers, multimeters, data loggers, chart recorders, signal generators, function generators, process controllers, indicators, oscilloscopes and scopemeters. The laboratory holds UKAS ISO/IEC 17025 accreditation for the calibration of voltage, current, resistance, frequency, temperature simulation and time parameters. The...

  • Mechanical Calibration Services

    Mechanical Calibration Services

    Our mechanical calibration services cover a number of metrology disciplines including; Length, Force, Mass, Torque, Vibration, Pressure and Viscosity. The laboratory is housed within a temperature controlled environment to maintain thermal stability of both the reference standards and instruments under test.

  • Humidity Calibration Services

    Humidity Calibration Services

    Humidity Calibration laboratory houses three controlled humidity chambers covering a temperature range of 0°C to 60°C with a unique facility for controlling probe stem conduction balancing. Automated humidity calibrations can be undertaken on instruments with communication protocols.

  • Medical Calibration Services

    Medical Calibration Services

    A team of experienced calibration and test engineers with a vast knowledge of laboratory electronic and biomedical equipment compliments the extensive hi-tech laboratories at Young Calibration. The calibration laboratory utilises the latest technological and methodical procedures covering an extensive range of EBME calibration services, available throughout the UK.

  • On-Site Calibration Services

    On-Site Calibration Services

    UKAS Accredited On Site Calibration Services Young Calibration extends its' calibration capabilities by providing a range of traceable and UKAS on-site calibration services throughout the UK, Europe and USA. Realising the commercial and cost benefits to our customers, the on-site calibration sevices cover the major site requirements for automotive, aerospace, pharmaceutical and process industries.

  • Automotive Calibration Services

    Automotive Calibration Services

    Comprehensive service, calibration and technical support for automotive, motorsport and Research & Development establishments, covering engine test beds, rolling roads, climatic chambers and component test rigs.

  • Air Sampler Calibration - Air Sampling Calibration Services

    Air Sampler Calibration - Air Sampling Calibration Services

    UKAS Air Sampler Flow Calibration Involved with air sampling regulatory or compliance measurements to OSHA, NIOSH, ASTM, ARCA, CAR 2012 or HSG 248 standards then you should be gaining UKAS accredited calibrations for your master air flow sampling system. Regular UKAS accredited calibration of your air sampler system whether this be a flowmeter, flow calibrator or pump will ensure your sampling system remains compliant and accurate. All air sampler flow...

  • Oxygen Pressure Gauge Calibration - UKAS Pressure Calibration Services

    Oxygen Pressure Gauge Calibration - UKAS Pressure Calibration Services

    Oxygen Pressure Calibration Leading provider of oxygen cleaning to ASTM G93 for all types of pressure gauges. Complete UKAS accredited pressure calibration cleanroom for pressure gauges up to 400 bar. Parameters ISO Class 6 Cleanroom Aqueous Cleaning Solvent Cleaning UV Analysis Microscopic Analysis Spectrometer Analysis Evaporative Light Scattering Analysis (ELS) Instruments Pressure Gauges Pressure Sensors Pressure Transmitters Pressure...

  • UKAS Calibration - Accredited Calibration Services

    UKAS Calibration - Accredited Calibration Services

    The Young Calibration laboratory provides UKAS accredited calibration (Laboratory 0604) services and thermal fluid and component testing services to a wide scope of industries whilst maintaining a reputation for quality, cost effectiveness, impartiality and reliability. Our specialist UKAS accreditation offerings for aviation, automotive, medical, environmental and pharmaceutical sectors provide worldwide acceptance for many of the ASTM, EPA, ISO, BSI,...

  • Testing Services

  • Radiator Performance Testing Services

    Radiator Performance Testing Services

    Young Calibration's Radiator Calorimetric Test Facility offers thermal performance characterisation for automotive, aviation, marine and industrial heat exchangers worldwide. The facility provides engineering teams with a versatile research and development tool for vehicle cooling systems, cooling packs and fan assemblies, covering low temperature/ low flow coolers, high performance heat exchangers for aviation and motorsport sectors up to cores sizes...

  • Chargecooler Performance Testing Services

    Chargecooler Performance Testing Services

    Young Calibration's Chargecooler Calorimetric Test Facility offers thermal performance characterisation for automotive, marine and industrial heat exchangers worldwide. Although the facility is predominantly aimed at the passenger car market, the wind tunnel and plant can cover charge and intercoolers from small industrial engines to medium-size truck installations, standby compressors and Formula 1 coolers.

  • Oil Cooler Testing Services

    Oil Cooler Testing Services

    Calorimetric testing for engine oil, transmission, hydraulic and squirt jet coolers, either water cooled or air blast models can be accommodated on all of the calorimetric wind tunnels, covering flow rates up to 100 litres per minute. Coolers can be tested on a controlled specification transmission fluid or a high performance engine motor oil or dilelectric oil for low capaity heat exchangers. Monitoring and calibration of the oils is maintained with...

  • Thermal Imaging Services

    Thermal Imaging Services

    Renown for its' versatility within the predicitive maintenance sector, thermal imaging services can also provide a valuable insight into the flow characterisitics and problematic issues with a host of Research and Development applications. A full range of thermal camera and infrared calibration services are also offered within the Temperature calibration laboratory.

  • Thermal Testing Laboratory Services

    Thermal Testing Laboratory Services

    The laboratory houses extensive facilities for the evaluation, testing and benchmarking of heat transfer and fluid flow equipment as part of our Thermal Testing Services. A vast array of high accuracy instrumentation supported with local data acquisition systems and online data analysis provides clients with an excellent tool to conduct heat exchanger performance testing.

  • Automotive Component Testing Services

    Automotive Component Testing Services

    Whether a one off prototype component under going intense development or a pre-production batch for line to line sensitivity testing, our versatile and custom defined test rigs will adapt to your requirements. The component testing facility is designed and run to accommodate superior turnaround times for motorsport engineering teams or cover the long term development projects for the OEMs and research establishments. All test rig facilities are of...

  • Cleaning Services

  • Particle Analysis Services

    Particle Analysis Services

    Comprehensive range of cleaning systems and cleanliness analysis techniques for bare and tanked heat exchanger cores, fuel pumps, turbochargers, bearing housings and associated closed circuit engine components to ISO 16232:2007. Flushing and sampling facility with online optical and post microscopic particle analysis is available for sizing and analysis down to 1 µm count. Additional to a gravimetric assessment, particle analysis can be...

  • ISO-16232 Services

    ISO-16232 Services

    A comprehensive range of sampling techniques are available within the facility to ensure a deep and thorough representative sample is taken. We have at our disposal a full sweep of processes for flushing, pressure spray, agitation, flow benches, shaker tables, pulsation and aeration processes to provide the optimum solution for each and every component passing through the laboratory. Along with a standard gravimetric...