Colloid-A-Tron data sheet

8 hard water solutions sinCe 1973 sales@scaleprevention.com +44 (0) 1628 634073 treatwater.com 9Colloid-a-tronproduCt data sheet• Unique Catalytic treatment system.• Independently proven technology for over 40 years.• No power requirements.• Easily installation• No maintenance or servicing required• WRAS approvedColloid-A-Tron has been proven in industry with over 250,000 installation across more than 50 countries.With no power requirements Colloid-A-Tron can be installed in isolated areas and either vertically or horizontal. Correctly installed Colloid-A-Tron will not have a dramatic effect on pressure losses with a loss of in most cases of no more than 2%.Peace of mind for contractors, no electrical connections or power requirements are required and there is no mechanical parts that are subject to breakdown. Once Colloid-A-Tron is installed users can expect a minimum service of 10 years.Colloid-A-Tron is a unique limescale prevention system specially designed for use in heavy industry. Applications range from cooling towers, heat exchangers chillers/condensers, and many more applications.Colloid-A-Tron is based on Fluid Dynamics unique catalytic alloy treatment system with a design inducing turbulence and surface contact between alloy and water providing a higher level of treatment than most other conditioning systems.C-a-t nominal diameterdn15dn20dn25 dn32 dn40dn50 dn651.6 254 163.6 305 165.2 305 168.2 609 1613.5 913 1620 913 1629 913 16maX. flowm3/hrunit lengthmillimetersmaX. pressurebardn80dn100dn125dn150dn200dn250dn30054 913 1680 913 16145 913 16270 913 16440 913 16650 913 16750 913 160.360.580.942.883.364.1815weightkgs20253539.5455057fitting optionsdn65 upward flanges:A wide range of flanges can be specified as the fitting option for Colloid-A-Tron. The standard is the BS4504 PN16 stainless steel flanges, higher pressure ratings are available on request.Couplingdata• Light weight design• Corrosion resistant • Fusion bonded epoxy coating• Wide sealing range – dn50 upward• Coated bolt sets• Total angular deflection of ±8°• WRAS certification• EPDM sealsmaterials of ConstruCtion1. Washer - Hardened steel zinc plated & passivated.2. Nuts - Steel Grade 8 with sheraplex coating3. Gland rings - Ductile Iron GGG-40/50 BSEN 1563.4. Bolts - M12 Steel Grade 8.8 sheraplex coating5. Centre Sleeve - Ductile Iron GGG-40/50 BSEN 15636. Rubber Sleeve - EPDM to BS EN 681-1 fusion bonded epoxybsp threadsMale threaded connections can be supplied on equipment size dn50 to dn50 in diameter. These conform to BSPT (British standard tapered).Colloid-a-tron materials:Stainless steel housing, 304 or 316 on request.Non sacrificial catalytic semi precious alloy.Wras no. 1012363larger sizes available on request