Only show results available in Virginia? Ok

Environmental Management Applications

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with emission capture, control and compliance hurdles that composite and carbon fiber producers face. We specifically address the needs of our carbon fiber customers with proprietary oxidizer designs for furnace and oven emissions. Our systems are recognized for energy efficient operation and destruction capabilities by the U.S. Federal Government at their Oak Ridge National Laboratories (ORNL). Anguil continues to help producers drive down energy consumption and emission output through our participation in The Beacon, an initiative at the forefront of green manufacturing practices for fiber production.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    odor control for asphalt

    Control Asphalt Odors Naturally: The production of hot mix paving asphalt generates odors that can be strong, persistent, and a nuisance to employees and neighbors alike. Controlling and abating these odors can be a challenge.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Waste recovery for construction industry

    Construction waste consists of unwanted material produced directly or incidentally by the construction industry. This includes materials that may contain lead, asbestos or other hazardous materials. There is increasing pressure on the construction industry to dispose of this hazardous material in an environmentally responsible manner. Tetronics can help alleviate this pressure by providing waste recovery plants to deal with all types of hazardous wastes generated from a construction projects lifespan: from land remediation through to the treatment of APCs from incineration as well as the treatment of asbestos.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Industrial air pollution control for the building materials, cement and lime

    One of the oldest industry sectors, the construction materials industry has developed a broad range of products that is constantly adapting to the state of technology and architecture: Concrete, thermal and moisture protection, masonry, plastics, composite materials and finishes, are all used in the erection of buildings and structures, and also as auxiliary materials on construction sites.

  • Premium

    Sustainable solutions for construction materials industry

    We make it easy to meet the growing demand for material compliance and transparency. Transparency and disclosure are now a requirement for doing business. Specifiers and building owners pursuing green building certification and corporate sustainability goals expect deep disclosure of environmental, ingredient, and supply chain impact information. Savvy building owners are also starting to incorporate transparency requirements into specifications.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    River and canal maintenance

    When maintaining rivers and canals Watermaster Classics excellent moving capabilities and versatile tools are of prime importance. When Watermaster works, it does not disturb passing traffic because it anchors with its own spuds, unlike one-purpose machines, which require cables for anchoring and stop the other traffic while working. Watermaster Classic is an excellent solution for accurate dredging. It can remove an exact layer of sediment from the bottom. Its excellent moving and anchorage capabilities enable efficient dredging in places where dredging has to be done in several different areas of the river. Watermaster Classic does not need external help to move from one place to another. Precision dredging is especially needed when exact hydrometrical modelling has been done. Watermaster Classic ensures the right results which are effective and long lasting.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Premium

    Channel passage deepening

    Very typical work for Watermaster Classic is deepening canals, rivers and other waterways. Many sites, which are impossible for other machines to get to, can be deepened and cleaned easily with Watermaster. The vegetation and trash is normally removed first by backhoe work and then the bottom is deepened to the desired depth by backhoe work or by pumping.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Premium

    Ice blasting technology for building restoration and remediation

    Applications of Coulson Ice Blast for Building Restoration and Remediation sector:

    Ice

    • Fire and Smoke Damage
    • Water and Flood Damage
    • Asbestos Removal
      (Negligible Airborne @ 0.035 mg/m3)
    • Mold Remediation
    • Adhesive removal
    • Reversal of corrosive contaminates
    • Wood Resurfacing
    • General cleaning
      • Brick
      • Stone
      • Concrete
      • Tile
      • Wood
      • Metal
    • Tank cleaning
    • Tar removal
    • Vintage aircraft cleaning

    Enhanced Ice

    • Soot
    • Lead Paint abatement

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Premium

    Restoration

    Restoring structures after floods and fires is a constantly evolving industry. In addition to keeping up with industry best practices for health and safety of both the contractors and the building residents post restoration, it is also important to be working with modern and reliable restoration equipment. Utilizing Omnitec and OmniAire products will allow you to take advantage of the latest best practice methods with equipment you know will work reliably and safely. Airborne contaminates and dust is a significant consideration for almost any restoration project. Did you know that studies have shown a substantial increase in air particulate matter during the drying process? Not only does dust and contaminates affect your worker’s safety, but also the safety of the post-restoration occupants. Just increasing the air circulation doesn’t remedy the situation and, without adequate filtration, may actually create more problems.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Sustainable solutions for building industry

    Prepare to lead the industry in building healthier, more sustainable spaces. The desire for healthier buildings, more sustainable products, and beautiful, engaging spaces now permeates design culture. Green building, net positive building, and regenerative design are increasing demand for building certification.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    Water treatment solutions for the construction waters industry

    Construction site stormwater run-off, groundwater and dewatering water. Passive and active treatment systems.

    By Dungeness Environmental Solutions, Inc. (DESI) based in Everett, WASHINGTON (USA).

  • Premium

    Tunnel Construction and Underground Mining Industry

    Dust can pose a particular hazard for people working in enclosed spaces such as in tunnel construction and deep mining. As the workers inhale, dust gets into their airways and can cause health problems. Poor visibility brings added exposure to risk. A reduction in the amount of dust generated also lengthens the service life of the machines. Therefore efficient dust control is particularly important in this industry.

    By EmiControls based in Bolzano, ITALY.

  • Premium

    Environmental protection solutions for the site construction industry

    Safe and Economical Solutions for Site Work. Presto Geosystems has a 35+ year proven track record in civil site construction and restoration solving soil stability and access challenges. Through infill confinement, Presto’s GEOWEB 3D geocells reduce cross-sectional requirements by 50% or more for tracking pads, construction staging areas, access roads and work platforms – and they perform well over soft ground. The safest and most economical portable mats, GEOTERRA, offer fast, temporary site access.

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

  • Premium

    Environmental solutions for the load transfer platforms (LTP)

    The GEOWEB system’s ability to effectively spread loads allows it to bridge and distribute loads to fewer pile cap columns, increasing the spacing between columns compared to traditional concrete pile cap systems.  This reduction in pile cap columns significantly decreases costs on a project.  When compared to geogrid solutions for minimizing columns, the GEOWEB® LTP system can be constructed with less expensive sand infill instead of aggregate/gravel.  Deployment operations do not require low pressure earth moving equipment because of the GEOWEB system’s unique ability to support construction equipment loads immediately after infilling.

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

  • Investment services for infrastructure industry

    McHewel’s Infrastructure Practice works closely with clients to meet their most pressing needs across transport, energy, social infrastructure (e.g. healthcare and education), and real estate. We are a global network of experts who help deliver practical and cost-effective solutions. In the last 3 years we have executed more than 300 client engagements serving 100 different clients in emerging as well as developed markets across the infrastructure industry.

    By McHewel Investment Group based in Toronto, ONTARIO (CANADA).

  • Vacuum excavation solutions for diamond saw slurry

    Concrete Cutting Contractors use our LP555SDT for saw slurry clean‐up. Concrete cutting using a Diamond Saw is the process of cutting expansion joints on freshly paved concrete roads. After cutting, water is used to eliminate dust thereby creating a slurry. This slurry has to be cleaned up due to EPA Regulations and the Vac-Tron vacuum excavator is the preferred clean-up method. Using water to create the slurry and then using the LP Series - Wet/Dry Industrial Vacuum Excavation System to eliminate any residue. Contractors perform this application frequently for airport runways and highway repair, as well as new construction.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Hydrodemolition

    Problem: The impact of concrete breakers and jackhammers is not limited to deteriorated concrete. It can damage rebar and produce vibration that generates microfractures in sound concrete. Not to mention the noise and the dust.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Ground Penetrating Radars (GPR) for Roads and Bridges Construction

    The roads and bridges construction and repair demand of careful investigation of road surfacing state, quality of used concrete and geological assessment of ground structure under roads to find any heterogeneity. GPRs can be applied here for: tunnels, road surface thickness measure, runways state assessment. The important advantage of GPRs using – quick road surface assessment.

    By Transient Technologies LLC based in Kyiv, UKRAINE.

  • Geosynthetic Lining for Highway and Civil Applications

    GCL can be used in highway and civil applications such as at airport de-icing facilities used to remove ice build up on the surfaces of planes. During the application process, glycol-based de-icing fluids can leak into local stormwater runoff, potentially causing pollution. CETCO GCLs were found compatible with de-icing fluid (glycol diluted 50/50 with water). GCLs can also be used to line roadway drainage swales for containment and prevent excessive percolation, thereby minimizing potential for groundwater contamination. Another example of using GCL in civil and highway applications is using the liner to contain acid rock and prevent runoff from entering the local water supply.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Noise Monitoring for Construction / Noise Monitoring for Demolition

    Cirrus Environmental can supply a range of noise measurement options for construction and demolition noise applications. These range from handheld sound level meters for taking noise measurements through semi-permanent noise monitors to permanently installed noise monitoring systems, all designed to be fully weather protected for reliable long term operation.

    By Cirrus Environmental based in Peterborough, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you