Only show results in Virginia? Ok

Calibration Gas equipment for Monitoring and Testing

  • Premium

    Envea - Model SM-4 - Continuous Mercury Emissions Analyzer

    Mercury Instruments (Environnement S.A Group) has developed the SM-4 analyzer specifically for total mercury emission monitoring applications in order to measure very low levels of mercury in flue gases as well as complex matrices (SO2, NOx, HCl, etc.) with high accuracy and reliability.

    By ENVEA based in Poissy, FRANCE. from Continuous Mercury Emissions Analyzer Product line

  • Premium

    THERMOX - Model PreMix 2000 - Analyzer

    The THERMOX PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen and fuel in pre-mix gases, operating in either excess fuel or excess air conditions.  The analyzer is fed a small sample of the air/fuel mixture burning it and them measuring the next oxygen or next excess fuel content of the mixture.

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Analyzer Product line

  • Premium

    Thermox - Model WDG-V - Combustion Analyzer

    The reliable identification of low combustion oxygen in a fired heater or boiler has always been critical to the effectiveness of the Burner Management System for proper control and safety. Low emission burners and aggressive firing control points to achieve increased efficiency and emission reductions have driven the industry to tighter control ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Combustion Analyzer Product line

  • Premium

    IMR - Calibration Gas Kit

    Standard features of the kit include; Calibration hose. Carrying case with shoulder strap (58 liter size only). Regulator for disposable calibration gas cylinder, stainless steel, fixed flow rate 1.5 liter/min.

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA). from Calibration Gas Kit Product line

  • Calibration Gas & Liquid Mixtures

    The composition of the mixtures available is practically infinite. It is restricted only by the physical and chemical properties, health, safety norms and the Stability and quality of the final mixture. At CSL we offer our clients any desired preparation tolerance and certification accuracy depending on the mixture components. We prepare mixture ...

    By Chemtron Science Lab. Pvt. Ltd. based in Mumbai, INDIA.

  • Model BE Series - Moisture Exchangers

    Reliably Add Humidity to Calibration Gases used in Laboratory and Scientific Applications. Humidifying calibration gas has been shown to improve detector accuracy and reduce false alarms. Perma Pure’s Nafion®-based BE Series has been specifically designed to achieve these results. This highly-selective permeation tubing extracts moisture ...

    By Perma Pure LLC - a Halma Company based in Lakewood, NEW JERSEY (USA). from Moisture Exchangers Product line

  • Ecom - Model B - Durable Case Mounted Analyzer

    Functioning as a durable case mounted analyzer; the ecom-B is built for boiler tuning and efficiency. Powerful magnets on the back of the analyzer allow the technician to work hands free during any combustion analysis for increased efficiency. Like all of our analyzers the ecom-B utilizes the newest technology and world-class engineering, ensuring ...

    By Ecom America Ltd. based in Gainesville, GEORGIA (US) (USA). from Durable Case Mounted Analyzer Product line

  • Model CAL 101 - Bump Station Calibration Gas Instrument

    The Cal101 Bump Station calibration gas instruments' unique design allows for the calibration of gas detectors as well as the bump testing of them. We utilize the bump test switch on the instrument in such a way that it can be held down easily and as long as it is, the instrument will produce calibration gas at the required concentration. As soon ...

    By Advanced Calibration Designs, Inc. (ACD) based in Tucson, ARIZONA (USA). from Bump Station Calibration Gas Instrument Product line

  • GENie - Model QC-1 - Ammonia Calibration Gas Instrument

    The GENie QC-1 is our newest gas instrument for ammonia calibration gas. By utilizing a sealed glass ampule that is broken for use, the GENie QC-1 is the perfect tool for anyone calibrating fixed or portable ammonia sensors. With user adjustable outputs, the GENie QC-1 can be set to a wide range of outputs allowing for calibration of nearly any ...

    By Advanced Calibration Designs, Inc. (ACD) based in Tucson, ARIZONA (USA). from Ammonia Calibration Gas Instrument Product line

  • SpecGas - Calibration Gas Mixtures

    Our complex calibration gas mixtures enable you to calibrate your gas chromatography equipment, moisture analyzers or FTIR analyzer. Our single and multi-component calibration mixtures are produced utilizing our proprietary blending techniques that ensure accurate and stable blends. Some of our reactive calibration mixtures include Ammonia, ...

    By Specgas Inc. based in Warminster, PENNSYLVANIA (USA).

  • Model DT3008 - Close Coupled Extractive Combustibles Analyzer

    The Model DT 3008 measures total combustibles or carbon monoxide by using an eduction pump to draw a sample from a process stack or duct to present it to a sensing cell. The cell is a platinum catalytic bead sensor. The sensor chosen depends upon the accuracy and the measurement levels required, and whether total combustibles or carbon monoxide is ...

    By Redkoh Industries, Inc based in Hillsborough Township, NEW JERSEY (USA). from Close Coupled Extractive Combustibles Analyzer Product line

  • HORIBA - Model FIA-510 - Online Process

    Employs FID method featuring superb response characteristics and stability. Allows highly sensitive and highly precise continuous measurement. Measurement can be performed in 7 ranges and in a range ratio of 0 to 10/30,000 ppm C, making it possible to safisfy a wide variety of applications.

    By HORIBA Europe GmbH based in Leichlingen, GERMANY. from Online Process Product line

  • Gas Generator

    The GasGenerator generates dynamic calibration gas by evaporating organic or inorganic solvents and by mixing with carrier and diluting with dilution gas. It consists of an evaporator, a dosing unit and a temperature control unit and two dilution stages. The GasGenerator has been designed especially for the use of our IMR-MS instruments.

    By V&F Analyse- und Messtechnik GmbH based in Absam, AUSTRIA. from Gas Generator Product line

  • Destruction Efficiency Systems

    These systems are custom designed to specification for monitoring VOC destruction or removal efficiency across thermal ozidizer, catalyst bet, carbon bed or bio-filtration units. Measurement is made using a pair of heated total hydrocarbon FIDs. Calculations, data archiving and reporting are performed in our fully-featured and user-configurable ...

    By K2BW Environmental Equipment Company based in Willow Grove, PENNSYLVANIA (USA). from Destruction Efficiency Systems Product line

  • AO2000 Series - CALDOS27

    The smallest of measuring ranges and fast measurements are characteristics of the Caldos27 thanks to its silicon sensor. In addition, the micro-structure of the sensor gives the Caldos27 a particularly short T90 response time.  Measuring ranges can be selected freely. An exceptionally long-term stability of the end point permits the Caldos27 ...

    By CEM Specialties Inc. based in London, ONTARIO (CANADA).

  • Model Cal 2000 - Calibration Gas Instrument

    The Cal 2000 provides unmatched versatility and accuracy in calibration gases. Field replaceable calibration gas sources (generating cells) provide a calibration standard for accurately testing Chlorine, Chlorine Dioxide, Hydrogen, Hydrogen Cyanide, and Hydrogen Sulfide gas detectors with a single instrument.

    By Advanced Calibration Designs, Inc. (ACD) based in Tucson, ARIZONA (USA). from Calibration Gas Instrument Product line

  • Model CAL 2000LT - Calibration Gas Instrument

    The CAL 2000 LT is the calibration gas instrument of choice for the user who does not need variable flow rates or concentrations. The CAL 2000 LT is available in pre-set flow-rates of 0.5 or 1.0 PPM. Field replaceable calibration gas sources (generating cells) provide a calibration standard for accurately testing Chlorine, Hydrogen, Hydrogen ...

    By Advanced Calibration Designs, Inc. (ACD) based in Tucson, ARIZONA (USA). from Calibration Gas Instrument Product line

  • Calibration Gas

    These cost effective cylinders are filled with certified precision gas mixtures for calibration and response check “bump testing” of gas leak detectors or research instrumentation. “Home made” chlorine gas is uncontrollable as well as dangerous. The high concetration of chlorine in a 150 lb process cylinder is lethal to ...

    By Foxcroft Equipment & Service Co. Inc. based in Glenmoore, PENNSYLVANIA (USA). from Calibration Gas Product line

  • ETG - Model Cal2000 - Calibrator

    The Cal 2000 provides unmatched versatility and accuracy in calibration gases. Field replaceable calibration gas sources (generating cells) provide a calibration standard for accurately testing Chlorine,Chlorine Dioxide, Hydrogen, Hydrogen Cyanide, and Hydrogen Sulfide gas detectors with a single instrument.

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY. from Calibrator Product line

  • Nuvia - Dose Calibrator

    Our PC-based Dose Calibrator ISOMED 2010 is designed for the fast and accurate determination of the activity or volume activity of radiopharmaceuticals that are used in the nuclear medicine for diagnostics and therapy. The dose calibrator is calibrated for all common radionuclides, including the RSO nuclides (Y-90, Er-169, Re-186) and the PET ...

    By NUVIA Instruments GmbH based in Dülmen, GERMANY. from Dose Calibrator Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you