Only show results in Virginia? Ok

Stack Testing equipment for Monitoring and Testing

  • Showcase

    Model VCEM5000/5100 - Gas Velocity Monitor

    The VCEM 5000/51000 represents the latest generation of CODEL’s unique flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Flow Monitors for Stack Emissions Product line

  • Premium

    Sierra MultiTrak™ - Model 670S - Multi-Point Gas Mass Flow Meters

    The 670S dynamically compensates for changes in the flow profile by using up to four independent mass flow sensing points to measure the instantaneous average gas mass flow velocity. The 670S is commonly used in petrochemical refining, coal-fired electric power generation, steel manufacturing and many other industrial processes that face the ...

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA). from Thermal Mass Flow Meters Product line

  • Premium

    ECO PHYSICS - Model neoCLD 60 Series - Compact Analyer

    Economical, reliable, precise, intelligent. Explore the capabilities of our cos! effective nCLD 60 single-channel instruments, detecting NO, NO2, and NOX, from 0.5 to 5000 ppm concentrations. Modular expansion packs for O2 and CO2 are available. It is suitable for stack emissions, combustion, petrochemical, gas manufacturing, ambient or research. ...

    By ECO PHYSICS AG based in Duernten, SWITZERLAND. from neoCLD Series Analyzers Product line

  • Premium

    Polaris - Model FID - Portable Flame Ionization Detection Analyzer

    POLARIS FID is an on-site portable TOC Analyser for Stack Emissions in compliance with EN12619, EN13526 and EPA METHOD 25A. It is TÜV Rheinald certified. It is a fully portable instrument because it incorporates everything needed for the analysis.

    By Pollution Srl based in Budrio (Bologna), ITALY. from Other Products Product line

  • Premium

    Model 1010 - Cross Duct CO Analyser

    The Model 1010 is a single channel cross-duct analyser for the measurement of CO. It uses an infrared transmitter to project a beam of light across the duct to a receiver mounted opposite. The light beam is tuned to a specific wavelength where the CO molecules absorb the light energy but there is no interference from water vapour and other gases. ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Stack Gas Analysers Product line

  • Premium

    Model DCEM2100 - Dual Pass Opacity / Dust Monitor

    The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack. Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, providing not ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Dust Monitors Product line

  • Premium

    HI-Q - Gas Sampling & ISO-Kinetic Sampling Probes

    HI-Q Environmental Products Company's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make stack-sampling systems design ...

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA). from Stack & Fume Hood Sampling Product line

  • Premium

    NEO Monitors LaserGas - Model Q SO2 - Mid-Infrared Sensors

    NEO Monitors LaserGas Q SO2 is using Tuneable Laser AbsorptionSpectroscopy (TLAS) i.e a non-contact optical measurement method employing solid-state laser sources. The sensor remains unaffected by contaminants corrosives and does not require regular maintenance. The absence of extractive conditioning systems further improves availability of the ...

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Premium

    HI-Q - Dry Gas Totaling Meters

    HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA). from Air Sampling Accessories Product line

  • Premium

    Sterlitech - Extraction Thimbles

    Sterlitech Corporation extraction thimbles are available in Cellulose or Glass Microfiber. If you are looking for a size that is not listed here, please call or email us for additional options.

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Filters - Extraction Thimbles Product line

  • Premium

    AEREON - Model CEMs - Sentinel Ultraviolet Flame Monitor

    The Sentinel flame monitor reliably provides remote flame detection up to 550 feet away, durability, ease of maintenance and rapid response time. If the monitor detects the absence of a flame for an adjustable amount of time, a set of dry form C contacts are activated and the pilot re-ignition system is set into motion. Response times are markedly ...

    By AEREON based in Austin, TEXAS (USA). from Combustion Equipment Accessories Product line

  • Premium

    Model VCEM5100 - Flue Gas Flow Monitor

    The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Flow Monitors for Stack Emissions Product line

  • Premium

    NEO Monitors LaserGas - Model III SP NH3 DeNOx - Ammonia Analyzer (3rd Generation)

    NEO Monitors LaserGas III ammonia analyzer (3rd generation) is specially designed for operation in hazardous areas and it provides real time in-situ NH3 measurements for virtually any type of DeNOx systems. The configuration is transmitter/receiver units for cross-duct/stack installation. An external junction (cable connection) box simplifies ...

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Premium

    NEO Monitors LaserGas - Model II SP - Single Path Monitor for In-Situ Measurement in Stacks

    NEO Monitors LaserGas is using Tuneable Laser Absorption Spectroscopy (TLAS) i.e a non-contact optical measurement method employing solid-state laser sources. The sensor remains unaffected by contaminants corrosives and does not require regular maintenance. The absence of extractive conditioning systems further improves availability of the ...

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Premium

    Gasmet - In-Situ Multicomponent FTIR Gas Analyser

    The In-Situ analyzer consists of a sample cell inserted into the stack or duct, heated steel mounting flange and the rugged GICCOR interferometer unit in an IP65 enclosure that is directly attached to the flange.

    By Gasmet Technologies Oy based in Helsinki, FINLAND. from Stationary Analyzer Systems Product line

  • Premium

    Polaris - Compact and Portable Probe

    Polaris FID is well known to be the most portable FID analyser for stack monitoring. This probe represents the best accessory that matches Polaris FID portability. Built in with high quality materials, Polaris Probe is lightweight, compact and robust. According to EN12619:2013, a separate inlet port placed before the filter element allows zeroing ...

    By Pollution Srl based in Budrio (Bologna), ITALY. from Micro GC GCX - Accessories Product line

  • Premium

    POLARIS - Compact and Portable Stack Probe

    Polaris FID is well known to be the most portable FID analyser for stack monitoring. This probe represents the best accessory that matches Polaris FID portability. Built in with high quality materials, Polaris Probe is lightweight, compact and robust. According to EN12619:2013, a separate inlet port placed before the filter element allows zeroing ...

    By Pollution Srl based in Budrio (Bologna), ITALY. from Polaris FID - Accessories Product line

  • Premium

    Model GCEM4000 - Multi-Channel In-Situ Flue Gas Analyser

    The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is capable of operating in very high dust loading conditions, up to several gm/m3 of dust. Its performance can be ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Stack Gas Analysers Product line

  • Premium

    TAPI - Model T100H - High Range UV Fluorescence SO2 Analyzer

    The Model T100H SO2 analyzer uses the proven UV fluorescence principle with the high measurement ranges and interferent rejection needed for extractive source monitoring. The Model T100H provides a simple but precise solution for a broad range of CEM and stack testing applications.

    By Teledyne API based in San Diego, CALIFORNIA (USA). from Ambient and Source Gas Monitoring Product line

  • Premium

    Model GCEM40 - Single or Multi-Channel In-situ Flue Gas Analyser

    The GCEM40 series is the latest generation of CODEL’s world renowned in-situ monitors. Our development, knowledge and practical experience have been utilised to produce this advanced technology gas analyser which gives complete flexibility of use on process or emissions applications whilst delivering superb accuracy and repeatability at a ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Stack Gas Analysers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you