Temperature Monitoring News

  • AMETEK Land Introduces New Actuator For Revolutionary Spot Pyrometer

    The SPOT actuator provides remotely controlled target alignment of a SPOT pyrometer for even greater accuracy in temperature measurement for aluminium processing applications that use the SPOT AL EQS (Aluminium Extrusion Quench and Strip) pyrometer.  The motorised unit is designed for use at the billet reheat furnace exit, die ...


    By AMETEK Land

  • Lufft weather sensor supported Belgian team during Bridgestone World Solar Challenge 2017

    The Bridgestone World Solar Challenge is one of the most popular competitions for solar vehicles in the world. The spectacular race took place in mid-October and encompassed 3,000 kilometres across Australia. With the help of the Lufft WS504 intelligent weather sensor, the Belgian Punch Powertrain Solar Team finished in the top three. "The Australian solar race is among the most challenging in ...

  • 2017 among the three warmest years recorded

    For all of us, as 2017 proves one of the three warmest years on record, climate change presents a greater risk of sickness or death than it did four decades ago, the United Nations says. And for some of the world’s poorest people, the consequences of unpredictable weather caused by changing climate mean devastating disruption to their daily lives. The news comes from the  ...


    By Climate News Network

  • LumaSense introduces the m920 Series Semiconductor OEM module

    LumaSense Technologies, Inc. introduces introduces the m924 (4-channel) and m922 (2-channel) Semiconductor OEM Modules, designed for Electrostatic Chuck, Chamber, and other device temperature monitoring during Etching and Wafer Fabrication processes. The LumaSense solution provides advanced and reliable temperature monitoring up to 330 °C. The new m924 Semiconductor OEM module sampling rate ...

  • TOC Analysers for IECEx and ATEX zones

    Total Organic Carbon analysers are commonly used to measure the level of organic contamination in water. Online TOC analysers installed in refineries and petrochemical plants are located right in the middle of the process facilities. Here explosive gasses, vapours or mist can be present. It is a high risk situation, as any spark or any heat source may cause an explosion. Hence, explosive ...


    By LAR Process Analysers AG

  • E6000 Hand-Held Industrial Gas Analyzer with Up to 6 Gas Sensors Support x Zendes

    Innovative Hand-Held Industrial Combustion Gas and Emissions Analyzer Measure Up To SIX Gases Simultaneously Built-in Printer & Full COLOR Graphic Display Automatic Data Saving & Expanded Internal Memory Bluetooth Wireless Communication & Software The E6000 Includes: Up To SIX Gas Sensors: ...

  • Why MEMS-based IR sources are superior to conventional IR sources

    Connecting physical objects to the virtual world opens a whole field of new business opportunities to manufacturers. Industry 4.0 does not just mean new possibilities to automate procedures. It is also a channel to offer new services to customers via near-instantaneous data transfer. Comprehensive and precise data allow for predictive forecasting. Machines can be serviced in exact intervals, ...


    By Axetris Ag

  • AMETEK Land to Demonstrate SPOT Range of Non-contact Thermometers at Heat Treatment Exhibitions

    As everything is built into the SPOT thermometer, it is a truly stand-alone solution that requires no separate processor. SPOT can be powered by either 24-30V DC or Power-over-Ethernet. Its rear display and controls allow target viewing, temperature reading and set-up through simple, menu-driven choices. One of the major advantages of SPOT is its outstanding target alignment. It features a ...


    By AMETEK Land

  • AMETEK Land to Showcase the Latest Infrared Pyrometers at Leading Aluminium Industry Events This Autumn

    AMETEK Land is showcasing the combined power of the SPOT AL EQS (Extrusion, Quench and Strip) ...


    By AMETEK Land

  • AMETEK Land to Attend NCSL International Workshop and Symposium 2017

    AMETEK Land will exhibit at NCSL International Workshop and Symposium, August 13-17, 2017 at the Gaylord National Convention Center in National Harbor, Maryland US, Booth 209. This year’s NCSL International conference, which is focused on” Precision and Performance with Measurement Science”, will consider how industry adjusts to new, more stringent ...


    By AMETEK Land

  • Aquaread launch new products - the LeveLine-CTD and LeveLine-Mini-CTD at Geotechnica 2017

    Today we are excited to announce the launch of two new products to join our wide range of precise, scientific water testing equipment. Following the success of the LeveLine water level and temperature logger, we have expanded the range, adding conductivity sensors to both the regular LeveLine and the SDi-12 mini version. The LeveLine-CTD and the LeveLine-Mini-CTD are the latest additions to the ...


    By Aquaread Limited

  • Quick TOC Online Analyser for Pure Water

    The QuickTOCpurity online TOC analyzer from LAR Process Analysers AG is specifically designed for pure water analysis. The sample is injected directly into the reactor using a special injection loop, thus avoiding sample contamination from any pollutants in the ambient air. At the heart of the TOC analyzer is the reactor, where thermal oxidation at 1,200°C takes place. At this temperature, ...


    By LAR Process Analysers AG

  • Non-Contacting Flow Measurement in Milwaukee Deep Tunnel System

    Pulsar Process Measurement have supplied Ultra 3 non-contacting ultrasonic measurement devicesto Milwaukee Metropolitan Sewerage District for critical measurement in approach channels within their deep tunnel storm water storage system that prevents pollution from reaching Lake Michigan. ...

  • Digital MEMS Inclinometer with Full Temperature Compensation

    Introducing the JDI-100/200 inclinometer series, the latest addition to Jewell Instruments’ group of MEMS sensors. Made in-house, this ruggedized inclinometer includes digital output and full temperature compensation across all measuring ranges which enables the unit to perform to 0.005° accuracy. ...

  • Hot Temperatures and Protecting Workers from Thermal Stressors

    While the first day of summer may still be a few weeks away, outdoor workers in many places are already experiencing hot weather in their daily routines. There are also countless employees routinely working in hot conditions such as indoor occupations that are subject to radiant heat sources, or physical activities and those with physical contact with heated objects. These workers are ...

  • Endress+Hauser expands US production

    Measurement engineering and process automation specialist Endress+Hauser has further expanded its production facilities in the United States. The Raman analyzer manufacturing plant in Ann Arbor, Michigan, was extended at a cost of 9 million US dollars. In Greenwood, Indiana, the company has built a new 8 million dollar plant for temperature measurement engineering. Kaiser Optical ...

  • Triathlon Woerden uses Eijkelkamp Measuring Buoy

    The Eijkelkamp Measuring Buoy is ready for the new swimming and triathlon season. Right now the buoy is informing the organisation of the Triathlon in Woerden, the Netherlands, about water temperature, quality and other parameters. They can check the actual water data at this website 24/7. ...


    By Eijkelkamp Soil & Water

  • 7 Questions to Determine the Oxygen Sensor for Your Application

    Do you know what Apogee Oxygen Sensor is best for your application? In this how-to-video, we answer the top 7 questions that will help you narrow down our four analog oxygen sensors to the one that will be the best for your use. We cover:  ...


    By Apogee Instruments, Inc.

  • AMETEK Land to Present on Infrared Temperature Measurement at Glass Performance Days

    AMETEK Land announces that its Technical Director, Dr. Peter Drögmöller, * and Glass Sector Lead, Mark Bennett, ** will speak at the internationally renowned Glass Performance Days (GPD), June 28-30, 2017 in Tampere, Finland.     Dr. Drögmöller will ...


    By AMETEK Land

  • NEW Class 1 sound calibrator Nor1256!

    Nor1256 is a small battery-operated precision class 1 microphone calibrator conforming to IEC60942 and ANSI S1.40. The combination of two different levels and two different frequencies allow both level linearity and frequency linearity to be verified. In addition the sound calibrator measures the environmental conditions; air pressure, temperature and humidity. ...


    By Norsonic AS

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you