- Home
- Equipment
Show results for
Refine by
Idemag Environmental Equipment & Supplies
27 equipment items found
Showcase
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
This equipment is designed to separate non-ferrous metals (aluminum, brass, copper) from the rest of the bulk stream. Taking into account that this type of metal does not interact with magnets, this separation is obtained creating a repulsive effect by rotating powerful neodymium magnets at high ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
These devices are used to separate metal sheets from each other and thus facilitate their handling. Its design is calculated based on the size and thickness of the plates to be separated. They are generally built on the basis of neodymium ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic filters for liquids are designed to prevent ferric pollution from damaging the process machinery such as blenders, granulators, mixers, shredders, etc. The concentrator is a high magnetic intensity unit, that is installed in the center of the device inside a stainless steel casing where the raw material circulates and whose mission is to attract and retain all the ferrous pollution ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The overbands separators with electromagnetic coil are especially suitable for continuous work that requires extra magnetic power. The electromagnetic field is higher to permanent magnets, which allows installing it at a greater distance from the material to be filtered. The situation on the conveyor belt is exactly the same as the system with permanent magnets. They are especially effective in ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic plate consists of a series of ferrite or neodymium magnets coated in stainless steel. This unit is placed suspended on the conveyor belt that carries the material to be treated. It is the most simple and economical solution for the separation of ferrous elements. Its use is recommended for installations with ferrous contamination and where the unit can be placed in accessible ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
Ferrite magnets, also called ceramic, are made through a sintering process. They are composed of a mixture based on iron oxide plus strontium or barium and a ceramic binder, crushed and pressed, with a very fine granulometry. If during the pressing process, the particles are oriented by applying a magnetic field, the end result is an anisotropic magnet. If this process is not done, the end result ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
Magnetic grids are designed using different magnetic bars configurations. The magnets are placed in round or rectangular pipes, preventing the passage of ferrous contamination. Especially suitable in production lines of grain o powder ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic drum is usually mounted inside a closed casing, for the separation of products with small size to avoid any material leakage. The product circulates inside the casing through an adjustable feed flap, whereby the material flow falls directly into the range of influence of the magnetic ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The metal detector is an electronic device designed specifically for locating metal contaminants mixed with other products. Its function is to protect any industrial equipment (crushers, shredders, mills, laminators, etc…) that can be damaged by a metallic element. ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic broom is used to remove metallic elements on large surfaces. It can be mounted in many configurations, to be attached to mobile machinery or to be moved manually. Its versatility and ease of cleaning makes it a perfect solution for this type of cleaning. In each case we study the needs of the client to design the ideal ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The drive will be appropriate to the weight of the unit and can be optionally equipped with a frequency inverter. Replacing the geared motor is quick and easy, we always use leading brands that adapt to market standards. The magnets are placed in an internal circuit, around a ferrous support, protected by an external stainless steel ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic pulleys are a highly efficient separation system to eliminate ferric contamination from many different materials as aggregates, granulated plastics, urban waste, etc. They are especially suitable for continuous work in demanding ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
Alnico magnets are made from Aluminum, Nickel, Cobalt, Copper, Iron and other components in smaller quantities. They are the only permanent magnets made using a casting process. The hot mixture is poured into the mold and after it has cooled, it is unmolded and polished. During the cooling process, the pieces are subjected to a magnetic field that orients the particles. The end result is an ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic humps are used for the removal of ferrous parts in industrial systems where the raw material falls freely by gravity. These magnetic separation equipments are adapted to both round and rectangular pipes. These magnetic separators are designed to remove from thin particles up to large pieces of ferrous contamination that circulate freely through the pipes. They provide uninterrupted ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The stainless steel magnetic separator is made up of a high induction magnetic pulley, capable of attracting stainless material. The magnetic configuration and effectiveness of this model will depend on the type and composition of stainless steel to be treated. Our technical team must carry out an operation test using the material provided by the client. In the stainless steel magnetic separator, ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
They are produced in a wide range of formats, both in diameters and lengths. We fully adapt its design to the characteristics of the existing installation or to the requirements of any new project. The drive will be adapted to the weight of the unit and can be optionally equipped with a frequency converter. The replacement of the gear-motor is quick and easy. We always use the best brands ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The electromagnetic plate is especially suitable for installations where the ferrous contamination is composed of large pieces or where the working height is higher than 300mm. from the surface. The unit consists of an electromagnetic coil with circular shape, in iron housing and with a stainless steel base. Its design is totally customized depending on the conveyor belt on which it will be ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The lifting magnet with lever is a highly versatile product, as it does not require a mains connection it can be used in any circumstance and location. Due to its physical shape, it can be used for rectangular handrails or bars. Its robustness makes it ideal for industrial applications since it does not require maintenance of any kind. With a compact and modern design, its magnetic circuit is ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic “overband” separators are placed suspended on the conveyor belt that carries the bulk stream to be filtered. The overband is suitable for the extraction of all kinds of ferrous materials in various industries (recycling, mining, cement, chemicals, plastics, aggregates, ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic filter for wet products is especially indicated in the mining industry. The primary material reaches the magnetic separator in the form of sludge contaminated with iron particles. In a first step, the sludge is diluted with water and the product is subsequently processed using high induction magnets. The final drain results in a clean dissolution of ferrous contaminants and a mixture ...