- Home
- Equipment
Refine by
4b Group Environmental Equipment & Supplies
67 equipment items found
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Brass rub blocks help monitor belt misalignment in bucket elevators and conveyors by detecting heat generated from the friction caused by a misaligned belt rubbing against the brass ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
VIBMIL is a vibration sensor designed for continuous monitoring of vibration levels in industrial environments. It is current loop powered accelerometer and delivers accurate vibration RMS velocity using a 4-20 mA output. Built with a stainless-steel enclosure, including a 3/4” NPT thread for conduit connection. The VIBMIL can be supplied with optional inbuilt NTC or PT100 temperature ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The WDB series bearing sensors are designed to screw directly into a bearing housing. Each sensor is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The MDB series is a range of bearing sensors manufactured to screw directly into a bearing housing through the existing 1/4” BSPT threaded grease zerk (can be installed in 1/8” NPT grease zerk fitting with an adapter). Each sensor is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The Watchdog Super Elite (WDC4) is easy to install and simple to set-up. The system processes signals from sensors for belt misalignment, belt speed & slip, continuous bearing temperature, pulley misalignment and plug conditions for bucket elevators or belt conveyors. When an alarm is detected it will sound an alarm and provide shutdown control of the elevator/conveyor and feeding ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The A400 Elite Trackswitch belt misalignment monitor uses 4B WDA or BAP magnetic proximity sensors to monitor the alignment of the belt in bucket elevators. Each control unit incorporates two independent monitoring circuits for early detection of belt misalignment on one or two bucket elevators. The 4B magnetic reluctance sensors operate in pairs to detect the position of steel bolt heads or ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
4B sprockets and trailing wheels are manufactured from high grade heat treated steel to a minimum hardness of 57 HRC. Each piece is machined to size with appropriate bore and keyway specific to each customer's application. ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The Bolt-N-Go flight system is a revolutionary assembly method for drop forged chains. Link and flight assembly is made easy by using a standard bolt and mechanical lock nut with a high strength, heat treated hollow pin. There are no circlips and no intricate assembly is required. There is no welding of flights, no need to remove chain from the conveyor for installation, and no issues with ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
4B's STEEL WEB belt is a rubber elevator belt with a special steel cord core. The cords provide low elongation with high elasticity in the length, and cross rigidity in the width. The built-in elasticity allows running over slightly crowned pulleys which greatly improves belt tracking. The rigid weft cords act as a barrier to ripping and tearing which increases the holding ability for the ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The T500 Elite Hotbus is a serial communications system designed to monitor up to 256 sensors for combined belt alignment, belt speed, continuous bearing temperature, pulley alignment, level indication (bin / silo) and plug conditions on bucket elevators and conveyors. With automatic machine shutdown capability and PLC / PC compatibility, this advanced microprocessor based system offers low cost ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Drop Forged Rivetless chains are typically used as overhead conveyors on automotive assembly lines, paint lines, appliance assembly lines, sugar mills and in the meat packaging industry. These chains have high strength, simple construction and do not require any tools assembly. The open design between pin and centre link prevent the conveying material from packing the joints. All parts are ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
We supply buckets elevator chains on application, in which there are too many numerous style / types to list or even ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Pressed steel elevator bucket that is ideal for free flowing material on centrifugal speed ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Starco elevator buckets are engineered for higher capacity elevator legs. Tapered sides ensure maximum bucket fill at a closer spacing. A unique front profile guarantees clean discharge over a wider range of operating speeds than conventional or other low profile elevator ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Industrial pressed steel elevator bucket. ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Type D elevator buckets are suitable for free-flowing materials, or for materials elevated at slower ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The new range of deep Super Starco elevator buckets is the result of intensive research to achieve the maximum individual bucket capacity, while still maintaining the perfect fill and discharge characteristics of the original standard Starco™ elevator bucket over a wide speed ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Reference 70™ (REF 70™) are ISO grade 5.8 elevator bolts with a concave head and four lugs on the underside to help prevent rotation when tightening. The REF 70™ bolt, when coupled with the special oval washer, is ideal for steel elevator buckets in heavy-duty industrial applications on larger diameter pulleys over 50 cm in diameter. Because of this domed area under the bolt ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
The fanged elevator bolt is characterized by two sharp teeth that are intended to penetrate the carcass of the elevator belt. Once the teeth penetrate the belt, they help keep the bolt from spinning which easily allows the lock nut to be ...
Manufactured by:4B Group based inLeeds, UNITED KINGDOM
Recommended for use in equipment/installations where there is a risk of fire or explosion. Suitable for handling cereals and products with moderate levels of oil, such as ...