- Home
- Equipment
Refine by
Algas Environmental Equipment & Supplies
20 equipment items found
Manufactured by:MicroBio Engineering, Inc. (MBE) based inSan Luis Obispo, CALIFORNIA (USA)
This first-of-a-kind prefabricated Algae Raceway featuring APIAC technology is intended for medium to large-scale operations. Take the guesswork out of building your own algae raceways with these patent-pending modular algae ponds, ranging in size from 22 to 101 m² (6.5 to 30 m³). Don't waste your time designing from scratch, sourcing the materials from countless vendors, then dealing ...
Manufactured by:Algae Centrifuge based inSan Francisco, CALIFORNIA (USA)
Nylon Mesh Filter Bags – Easy change out between batches. Each centrifuge will come with (1) bag of your choice: 5, 10, 25 and 50 micron. If you have custom requirements: we can make these bags from other materials or special pore sizing upon request. Filter bags are durable and are meant to be re-used over and over. The mixture is either dumped in or fed into the rotor from the top feed ...
Manufactured by:Algae Centrifuge based inSan Francisco, CALIFORNIA (USA)
Nylon Mesh Filter Bags – Easy change out between batches. Each centrifuge will come with (1) bag of your choice: 5, 10, 25 and 50 micron. If you have custom requirements: we can make these bags from other materials or special pore sizing upon request. Filter bags are durable and are meant to be re-used over and over. The mixture is either dumped in or fed into the rotor from the top feed ...
Manufactured by:Algae Centrifuge based inSan Francisco, CALIFORNIA (USA)
Nylon Mesh Filter Bags – Easy change out between batches. Each centrifuge will come with (1) bag of your choice: 5, 10, 25 and 50 micron. If you have custom requirements: we can make these bags from other materials or special pore sizing upon request. Filter bags are durable and are meant to be re-used over and over. The mixture is either dumped in or fed into the rotor from the top feed ...
by:Droycon Bioconcepts Inc. (DBI) based inRegina, SASKATCHEWAN (CANADA)
The ALGE-BARTs contain a ball, dehydrated medium, and geo-textile. Add water sample until the water reaches the top of the textile. Below the ball, there is a layer of textile into which the algae can grow. Nutrients to support algal growth diffuse into the water sample from dehydrated medium deposits in the base of the ...
Manufactured by:Algae Centrifuge based inSan Francisco, CALIFORNIA (USA)
Cold Ethanol is proving to offer full spectrum and high quality extracts at high volumes. And, centrifuges are becoming the go-to-tool for processing with ethanol. Centrifuges are traditionally useful for separating liquids from solids and can easily separate plant matter from the essential oils. They work like big washing machines with special upgrades like fast motors and stronger seals. ...
Manufactured by:Algae Research Supply based inCarlsbad, CALIFORNIA (USA)
DO - Dissolved Oxygen Meter: Range 0.0 – 19.9 ppm O2/l , Resolution of 0.1mg/L, Unit gives 1.5% Full Scale Accuracy, Includes a MA840 Polarographic D.O. Probe with 3 Meter Cable, Spare Membranes, Starter Bottle of MA9071 Electrolyte Solution, Screwdriver for Calibration & a 9 V Battery ( Recommended Calibration Procedure is "Open Air" ...
Manufactured by:Algae Centrifuge based inSan Francisco, CALIFORNIA (USA)
This is the variable frequency drive which runs the 2HP Baldor motor for the ATD25 ...
Manufactured by:MicroBio Engineering, Inc. (MBE) based inSan Luis Obispo, CALIFORNIA (USA)
The new RW0.5i is a simplified version of the RW0.5 that uses impeller mixers instead of paddle wheels. The impellers provide an adjustable speed mixing that integrates directly into the control system. The RW0.5i uses the same raceways, stand, and accessories as the standard RW0.5 but eliminates the paddles, motor, and VFD. ...
Manufactured by:MicroBio Engineering, Inc. (MBE) based inSan Luis Obispo, CALIFORNIA (USA)
Assemble these lightweight paddle wheels with hand tools yourself with our easy to follow assembly guide, or optionally with our skilled on-site installation team. We engineer these paddle wheels with tight clearances to minimize backflow for optimal mixing ...
Manufactured by:Shenzhen Xime Connector Technology Co., Ltd.. based inShenzhen City, CHINA
M5 4-pin PCB through-hole soldered board-side female connector. This type of M5 4-pin female plug-in female connector can be soldered to the board through the PCB through-hole and can be mass-produced orthrough a reflow oven for dramatic productivity gains. M5 PCB lock-plate female connector, front mount, single wire with soldering. The PCB M5 female connector is available in 3-way and 4-way ...
Manufactured by:MicroBio Engineering, Inc. (MBE) based inSan Luis Obispo, CALIFORNIA (USA)
The largest pre-designed algae raceways that MBE provides have an area of 1,000, 2,000, and 4,000-m2.. These ponds utilize earthen -type construction and a new composite paddle ...
Manufactured by:Cellwood Machinery AB based inNässjö, SWEDEN
The Algas microfilter can be described as a drum filter with special features. Filtering from the inside and out allows the recovery trough to be installed on the inside of the drum. This means the filter operates with a much higher level compared to conventional designs, increasing filtration time and improving ...
Manufactured by:Algae Centrifuge based inSan Francisco, CALIFORNIA (USA)
Cold Ethanol is proving to offer full spectrum and high quality extracts at high volumes. And, centrifuges are becoming the go-to-tool for processing with ethanol. Centrifuges are traditionally useful for separating liquids from solids and can easily separate plant matter from the essential oils. They work like big washing machines with special upgrades like fast motors and stronger seals. ...
Manufactured by:Algae Centrifuge based inSan Francisco, CALIFORNIA (USA)
The E series centrifuge is top discharging centrifuge built to handle cold ethanol extractions of cannabis.Our upgraded wash and dry ethanol cannabis extraction centrifuge now comes with a larger bowl along with the coolant jacket, explosion proof motor and touch screen display. ...
Manufactured by:Algae Research Supply based inCarlsbad, CALIFORNIA (USA)
pH Meter, Range: 0.00 to 14.00 pH and 0 to 70 C, ±0.01 with ATC & Automatic Calibration, Comes with a SE220 Double Junction pH Probe & MA830R Temperature Probe, 9 V Battery, 20 ml. pH 7.01 & 4.01 Sachet Calibration ...
Manufactured by:Algae Research Supply based inCarlsbad, CALIFORNIA (USA)
Transfer pipettes Volume: 3 ml. Graduation: 0.5 ml Nonsterile, Polypropylene ...
Manufactured by:Algae Centrifuge based inSan Francisco, CALIFORNIA (USA)
Perfect for harvesting all types of algae. These centrifuges have been a staple of the alternative fuel community for more than 7 years. Made of durable aluminum castings and rotor/bowl.Lifetime warranty on the castings and the motor carries a 2yr warranty. ...
Manufactured by:Algae Centrifuge based inSan Francisco, CALIFORNIA (USA)
Here is the attachment Booster Cone for boosting the efficiency of the centrifuge. It get the fluid spinning before entering the bowl, thereby reducing turbulence. It also insures the new fluid enters at the bottom of the bowl, thus having to work it’s way through the entire contents of the bowl before leaving the centrifuge. It makes for the best clean/harvest. ...
Manufactured by:bbe Moldaenke GmbH based inSchwentinental, GERMANY
An instrument for the fast and sensitive detection of toxic substances in water. The bbe Algae Toximeter continuously monitors water for the presence of toxic substances. Standardised algae are mixed with the sample water and the instrument detects the photosynthetic activity of the algae. Damage to the algae, caused e.g. by herbicides, causes a reduction in algae activity and activates an alarm ...