- Home
- Equipment
Refine by
Avco Environmental Equipment & Supplies
51 equipment items found
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
When additional space is required between the valve and operator for safety or insulation, there are a variety of extension brackets available in 304SS or aluminum for the AVCO 1000 and 2000 Series ball valves. These include open air brackets that provide fast cooling of heat coming from the valve and closed extension bonnets that allow easy addition of insulation blankets. Both are available in ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The AVCO 2100 series ball valve is a sanitary/clean valve ideal for use in the biotech, pharmaceutical and high purity industries. The 3-piece design comprises low carbon stainless steel (SS 316L) components, which are electro-polished to 10 Ra surface finish on all contact surfaces. Cavity filled seats are available to minimize dead space in the body cavity and keep operating torque low. We also ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The AVCO 2500 series brings all the flexibility, features and benefits of our 2100 series sanitary ball valve to the cryogenic market. Designed in accordance with ASME BPE, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The AVCO 2800 series side entry diverter sanitary ball valve uses a 90-degree ball to swap or divert flow from one port to another or change one media flow to another media flow through a common port. This gives an easy solution to flush systems via one control point or a single point entry into a mix tank and offers long life service in the most demanding conditions. Available end connections ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The AVCO 7100 series sanitary ball valve is a 3-way or 4-way side entry diverter ball valve with clamp or extended butt weld tube OD ends. The ball can be oriented in the valve to provide for mixing or diverting media in a variety of configurations with ‘L’ and ‘T’ port options. Seats are made from TFM to provide a wide operating temperature range for both hot and cold ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
AVCO prefabricated CFOS (Cleaned for Oxygen Service) manifold sections are designed to reduce plant assembly costs and time while maintaining the demands for high quality systems. CFOS Manifolds are produced with a main tube made from 316L and can be supplied in lengths up to 24 feet. The main line can vary between ¼” and 12” with the valve lines running between ¼” ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The AVCO manual handle operators for ball valves come in a variety of shapes, sizes and have many options to address your technical, safety and space requirements. AVCO ball valves from ¼” through 2” come standard with a locking lever handle that provides positive travel stops and lock off. Valves from 2 ½” through 4” come standard with a pipe handle that can ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
AVCO emission bonnets enable the early detection of fugitive gasses or liquids through a sniffer port on top of the valve. The bonnet is made with the same materials that make up the valve body to ensure compatibility between materials. The bonnet is bolted to the top of the valve body and sealed with an engineered Flexitallic spiral wound gasket. The sniffer port is threaded to allow for easy ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The AVCO 6100 Series knife gate valve has ANSI 150# flange lug connections and meets the requirements of MSS-SP-81 and TAPPI TIS 405-8. The valves are available in sizes from 2” through 24” and come in 316SS, 304SS, cast iron and Hastelloy C. The valves use a unique design which mechanically locks the seat in the valve body using a stainless steel retainer ring. Resilient EPDM and ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The AVCO 11000 series is a 3-piece trunnion ball valve designed to complement our floating ball offerings and is aimed at the higher pressure and larger valve size markets. Made from forged alloys, it is most common in 316 stainless steel (A182-F316) and carbon steel (A105), although other alloys are offered upon request. It is available from 2” through 28” with a full port ball to ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The AVCO 1800 series side entry diverter ball valve uses a 90-degree ball to swap or divert flow from one port to another or change one media flow to another media flow through a common port. This gives an easy solution to flush systems via one control point or a single point entry into a chemical mix tank and offers long life service in the most demanding conditions. Pressure classes listed in ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The AVCO 9500 series ball valve is an enhancement to our 9100 Series valve that enables it to meet the demands of the cryogenic market. The 2-piece design is available from 1/2” through 12” with Class 150 or Class 300 integral flanges. The full port ball minimizes the pressure drop across the valve for a more efficient energy use within the piping system. It is designed to be fire ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The AVCO 9900 series ball valve is a 2-piece flanged valve designed for the precision flow control market. It has all the features of our 9100 series valve with the added benefit of an engineered Vee or slot in the floating ball along with tight tolerances to minimize hysteresis (backlash and judder). Standard balls are available with 15, 30, 45, 60 and 90 degree Vee ports. We can also custom ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The prime purpose of paddle type orifice plates is flow measurement using differential pressure to determine the flow. As a fixed geometry device, it is extremely reliable as there are no moving parts leading to efficient longevity. These orifice plates are also used for pressure restriction and choked/critical flow giving fool-proof safety protection of critical systems and equipment. AVCO ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
One of the most important criteria for accurate flow measurement is a long length of uninterrupted straight pipe run upstream of the orifice plate. This is required to remove swirl and create an acceptable flow profile, but with lengths required as much as 75 times the pipe bore per ASME MFC-3M & ISO 5167 or 145 times the pipe bore per AGA 3, it is often impractical and prohibitive to achieve ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
Flow nozzles are particularly suited to high velocities and temperatures often encountered in steam flow. They are inherently more expensive to manufacture than a standard orifice plate, but are dimensionally more stable and give longer life at the higher velocities. The pressure loss is similar to an orifice plate, sized for the same flow conditions, but its longevity gives a distinct advantage ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
AVCO prefabricated CFOS (Cleaned for Oxygen Service) manifold sections are designed to reduce plant assembly costs and time while maintaining the demands for high quality systems. CFOS Manifolds are produced with a main tube made from 316L and can be supplied in lengths up to 24 feet. The main line can vary between ¼” and 12” with the valve lines running between ¼” ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The AVCO HP1100 series ball valve is designed for high pressure applications in the smaller pipe size markets where high performance and quality are essential. The precision machined, three (3) piece design was created by AVCO engineers to provide greater flexibility for butt weld, socket weld, NPT and SAE AS5202 ends up to 6000 psi. It is available in sizes from ½” to 2” and ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
The AVCO IV1100 series ball valve is a welded instrumentation valve with multiple ports based upon the proven design of our signature 1000 series high performance ball valves. The body and end are machined from bar stock with the body having multiple 1/2” FNPT connections to allow addition of measurement devices. The end connection is available as 1/2” or 3/4” FNPT. It is ...
Manufactured by:Alloy Valves and Control, Inc. (AVCO) based inSanta Ana, CALIFORNIA (USA)
Precision flow control using a precision machined paddle type orifice plate relies upon a correct installation. If the plate is incorrectly installed it will give unknown inaccuracies in the measured flow and could lead to a costly loss of product. To overcome this, AVCO provides complete ASME B16.36 orifice flange sets to ensure accurate centralization of the orifice bore to the flange bore per ...