- Home
- Equipment
Refine by
Cs Environmental Equipment & Supplies
94 equipment items found
Manufactured by:CS Tech Co., Ltd. based inGangseo-gu, SOUTH KOREA
Enhanced electromagnetic shield (high frequency). Cost saving (20% cheaper than single nickel). High corrosion resistance. Excellent ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Pressure group with 2 electricpumps. Uses: For the supply of water with suction from wells. To increase the pressure available from a distribution network. The characteristics and performances depend on the type of electric pump installed. ...
Manufactured by:CS Tech Co., Ltd. based inGangseo-gu, SOUTH KOREA
Copper exterior (*Ageing). Cost saving (15% cheaper than single copper). Lightness (11% lighter than single copper). Enhanced strength. Enhanced formability (elongation ↑, strength ?). Anti-bacterial. Excellent thermal electric properties (by copper portion ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
USE: Multi-stage submersible electric pumps designed to solve all problems of conveying clean water with temperatures that do not exceed 35 ° ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
At-flow electronic controller, which is equipped with internal pressure and flow sensors and a small membrane for accumulating water. Automatic reset. Possibility of starting ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
At-flow electronic controller, which is equipped with internal pressure and flow sensors and a small membrane for accumulating water. Automatic reset. Possibility of starting ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Wall-mounted inverter for electric pumps, single-phase or three-phase, with convection or forced cooling for powers up to 1.5 Kw single-phase and up to 30 Kw three-phase. Single-phase power supply version for single-phase electric pump up to 11 Amp. Single-phase power supply version for V230 three-phase electric pump up to 7 Amp. Three-phase power supply version for three-phase V400 electric ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Inverter for in-line installation on delivery pipes. single-phase or three-phase, with cooling for passage, for powers up to 1,5 Kw single-phase and up to 7.5 Kw three-phase. Single-phase power supply version for single-phase electric pump up to 12 Amp. Single-phase power supply version for V230 three-phase electric pump up to 10 Amp. Three-phase power supply version for three-phase V400 ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
The submersible motors in the 4'' SM series, are rewindable, like their predecessors and can work in wells with water not higher than 35 ° C with a PH between 6.5 and ...
Manufactured by:CS&P Technologies, LP based inCypress, TEXAS (USA)
Our compact unit is a low cost solution for purging coiled tubing reels. The industry has historically used larger units and now our smaller unit does the job better at a lower cost. As with all of our units, the attention to detail ensures a properly designed system that lowers operating cost and maintenance making it the most reliable in the ...
Manufactured by:CS&P Technologies, LP based inCypress, TEXAS (USA)
CS&P offers a full line of premium quality centrifugal pumps. Our pumps are available in aluminum and bronze construction for compatibility with oxygen. All of our pumps are specially fitted with an inducer for low NPSH ...
Manufactured by:Chandler Systems, Inc. based inAshland, OHIO (USA)
Automatic backwashing and upflow water filters are the answer for solving common water quality problems. Only the highest quality, proven media and controls are used in a Chandler Systems Automatic Water Filter; for removal of taste, odor, color, sediment, low pH and iron. Our motor-driven piston control valve is the most reliable under even severe water conditions and resists common adversaries ...
Manufactured by:CS&P Technologies, LP based inCypress, TEXAS (USA)
CTEC controls were founded on the fundamental belief that there is a better way to optimize equipment performance and reliability. Our systems are a result of real world experience derived from years in the field and an understanding of the need for efficient, reliable and safe ...
Manufactured by:Compounding Solutions LLC based inLewiston, MAINE (USA)
Mobilize is a thermoplastic additive designed to reduce friction on surfaces of medical devices and improve processability. Compounding Mobilize in thermoplastic formulations creates more lubricious finished product surfaces which offers an alternative to lubricious liners and multi-layer construction. Mobilize also promotes process stability and faster production rates in ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Electricpump complete with electronic pressure-flow controller, which is equipped with internal pressure and flow sensors and a small membrane for water accumulation. Automatic reset. Possibility of starting adjustment The characteristics and performances depend on the type of electricpump installed. ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
4" submersible electric pumps equipped with an oil bath encapsulated motor. Check valve incorporated in the outlet. Civil and agricultural applications are among the most ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
6" submersible electric pumps equipped with motor encapsulated in an oil bath. Check valve incorporated in the outlet. Civil and agricultural applications are among the most ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
The EM series submersible electric pumps (for wells with a nominal diameter of 8") are radial, with cast iron diffusers and impellers, with external stainless steel tie ...
Manufactured by:Component Supply Company based inSparta, TENNESSEE (USA)
Zeus FEP Heat Shrink Tubing, AWG 0, 1.3:1 Shrink Ratio, 48" ...
Manufactured by:Component Supply Company based inSparta, TENNESSEE (USA)
Nylon Mesh, 10 Micron Opening, 4% Open ...