- Home
- Equipment
Refine by
Applications
- Wastewater Aeration for Distilling Industry
- Wastewater Aeration for Contractors
- Wastewater Aeration for Chemical Industry
- Wastewater Aeration for Landfills Treating Leachate
- Wastewater Aeration for Meat and Protein Industry
- Wastewater Aeration for Pharmaceutical Industry
- Wastewater Aeration for Dairy & Cheese Industry
- Wastewater Aeration for Petroleum Industry
- Wastewater Aeration for Food Processing Industry
- Wastewater Aeration for Beer Industry
- Wastewater Aeration for Pulp and Paper Industry
- Wastewater Aeration for Wine Industry
- Wastewater Aeration for Sugar Industry
- Wastewater Aeration for Municipal Facilities
Edi Environmental Equipment & Supplies
35 equipment items found
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
Material Features: High degree of mechanical integrity . Available in standard or metric pipe sizes up to 14” (356 mm). Adjustable C/L range +/-2” (50 mm) . Prevents axial rotation while pivoting at the base to allow for expansion and contraction. Available in 304 stainless steel or 316 stainless steel. Available with additional bracing for high energy or other special ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
Material Features: Low capital and maintenance cost. Engineered air outlet orifices . Non-clog coarse bubble design. Durable ABS body, premium EPDM membrane. Preferred mounting on bottom of air piping. Units in stock for immediate shipment. Integral check valve to minimize entry of solids into piping. 3” (76 mm) diameter air distribution. 3/8” and 3/4” male threaded ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
EDI fixed grid configurations are floor-mounted and ideal for concrete basins and steel tanks. Because they don’t move, they can support the highest-density applications in both municipal and industrial ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
The EDI FlexAir Pro Magnum diffuser is a fine pore, flexible membrane diffuser that offers a superior design for optimal aeration capacity. It features a full circumferential perforated area and can be configured with standard or high-capacity perforations for increased aeration and mixing capacity and maximum SOTE. The diffuser is ideally suited for digesters and standard biological treatments ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
Efficient geometry supports high-density installations of over 65% floor coverage. Non-buoyant design for reduced uplift and stress on mounting connection. Premium quality membranes available in EPDM, PTFE, Silicone, Polyurethane, and Matrix PLUS for reduced fouling and minimum maintenance. Non-metallic design available for highly corrosive applications. Backflow protection with triple ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
Coarse bubble diffuser systems offer moderate oxygen transfer efficiency and low maintenance with aggressive mixing, providing circulation and turbulence that ensures the entire water column is mixed adequately and sludge accumulation is limited. They are a very robust solution, with no moving parts in the water and orifices that are less prone to clogging than other forms of ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
StreamLine is EDI’s patented configuration with unmatched system simplicity. Resulting in up to 33% reduction in system installation time compared to competing panel systems. Plus, membrane replacement can be completed in the ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
Fine Bubble diffuser systems disperse the diffused gas volume to transfer an equivalent amount of oxygen as a coarse bubble system. The diameter of gas bubble has a dramatic impact on surface area. Comparing 1 cubic foot of air used in fine, medium, and coarse bubble systems demonstrates why fine pore diffusers optimize the use of air and reduce energy consumption. This subsurface aeration ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
Material Features: Premium pure compounds for stability and long membrane life. Fully Armor-Coated impregnated top layer guaranteed to never wear off. Provides membrane protection for outside (water side), and slit perforations. Dual Layer, high temperature inside layer, with co-extruded Armor-Coated outer layer. Strongest panel PU membrane material. ARMOR-COATED MATRIX™ Reduces organic ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
Material Features: High temperature resistance up to 350 °F (177 °C). Excellent uniformity and distribution of released air bubbles. Formulated for application specific condition. Good chemical compatibility in most municipal and industrial application. Available for tube and disc diffusers. UV protection inherent in the compound. Low dynamic wet pressure (DWP). Note: Not recommended for ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
Available for FlexAir Pro tube and panel diffusers. Maximum mechanical strength and properties—will withstand harsh wastewater environments. Smooth surface characteristics inhibit fouling and prevents build-up of bio-solids. Excellent durability and chemical resistance. UV protection to resist UV rays before start-up of the system. long-term stability in DWP. Tested with over 2 million ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
FlexAir Basic conforms to the most common aeration specification with a quality, American-made (or UK-made) product. If your specification calls for a solvent-welded, disc diffuser-based system, you need to meet FlexAir Basic. Designed and built by EDI’s aeration engineers to meet the requirements of this common spec, FlexAir Basic is a high-quality product delivering high-efficiency ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
62 mm and 91 mm diameter tube diffusers with standard length options from 250 mm to 1000 mm. Choice of PVC or CPVC material diffuser tubes available. Stainless Steel ¾” male pipe thread or plastic ¾” female pipe thread connections available. Premium quality membranes available in EPDM, PU, PTFE-infused Matrix Plus™, Silicone, or other specialty materials. ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
The EDI CoarsAir MaxAir PVC or CPVC Diffusers offer efficient mixing for demanding applications such as aerobic digesters or industrial wastewater treatment. The CoarsAir MaxAir PVC diffuser can withstand abrasion and is resistant to most inorganic substances, diluted acids, alkalis, and aliphatic hydrocarbons. The CoarsAir MaxAir CPVC diffuser offers outstanding long-term resistance to corrosive ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
Material Features: Glass-fiber-reinforced polypropylene diffuser body for maximum chemical, temperature, and UV resistance. Saddle mount diffuser provides ease of installation/ maintenance along with maximum ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
EDI DWP (Dynamic Wet Pressure). Connection monitoring system is provided to allow periodic confirmation of diffuser unit dynamic wet pressure (headloss through the diffuser ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
Material Features: Maintain system efficiency and performance. In-situ process- no downtime. Economical hardware and cleaning using formic acid. Effective removal of CaCO, minor bio-solids and other organic inorganic deposits. Designed for use with ceramic or rubber membranes, and safe for use on stainless steel piping. Safe to hand and operate, liquid acid eliminated need for hazardous HCI gas. ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
MiniPanel Systems deliver lower total energy cost in most applications. They are heat resistant, have air flow ranges, use EDI membranes, are configurable with retrievable options. FlexAir Pro MiniPanel units can be mounted on any type of a pipe, plastic or metal. These choices of materials are an engineering benefit for use by the engineer or ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
The FlexAir disc diffuser is a fine pore flexible membrane or ceramic media diffuser that provides operational flexibility with maximum oxygen transfer efficiency. For ease of installation and maintenance, EDI's disc diffusers offer two connection methods: threaded and integrated saddle mount. The threaded disc diffuser can be installed in any 3/4-inch fitting or pipe ...
Premium
Manufactured by:Environmental Dynamics International (EDI) - Axius Water based inColumbia, MISSOURI (USA)
The EDI CoarsAir MaxAir SS diffusers offer efficient mixing for demanding applications such as aerobic digesters or industrial wastewater treatment. The CoarsAir MaxAir SS is manufactured as standard in Stainless Steel 304, available in 316 for select applications, and is a preferred option for long-term resistance against most acids, bases, salts, and other aggressive chemicals or deep tanks ...