- Home
- Equipment
Refine by
Eigenbrodt Environmental Equipment & Supplies
20 equipment items found
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
ONES 250 (OFS) is a sensor for visibility with a good cost-performance ration with a main application in traffic purposes. Using so called backscatter technique it measures the amount of water particles i.e. fog in the air that limit the visibility. The design allows the operation in various locations and applications. The validity and the stability has been - so far - resulting in satisfied ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
The ship rain gauge is designed to measure rain fall on moving ships or buoys. The high relative flow velocities on a cruising vessel may carry the rain almost horizontally over the ship. By measuring the amount of water that is collected by a vertical surface, a correction for the wind effect is possible. Evidently the local relative wind speed at the monitoring site of the instrument is to be ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
All types of Eigenbrodt fog sampler feature the same principle of collection: Fog water is collected with a sampler operating on the impactor principle (see figure). The air is sucked at a rate of rd. 125 m³/h through a twin nozzle behind. Droplets are been excellerated. They slash onto a specially designed deposition body, where the water is captured and flows down into a collection body. ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
Collection of precipitation for analyzing organic components as well a mercury in the precipitation, the choice of the best fitting contact material like sample funnels is very important. In these cases PTFE and DURAN-glass, in some cases also stainless steel are preferable to HD-polyethylene. Collecting precipitation for acidifying components HD-PE is seen as the appropriate contact material to ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
The temperature sensor is installed into the sample room as shown left hand side. The data is directly available as analogue PT100 signal. In combination with the Eigenbrodt signal PCBs, the temperature data of the sample room can be accessed as 4-20mA signal or as serial signal, depending on version of the ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
The temperature sensor is installed into the sample room as shown left hand side. The data is directly available as analogue PT100 signal. In combination with the EIGENBRODT signal PCBs, the temperature data of the sample room can be accessed as 4-20mA signal or as serial signal, depending on version of the PCB. Alternatively also a internal temperature logging unit with sensor for sample room ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
The all new SD-card data logger allows in combination with Eigenbrodt signal PCBs to log the data sets on SD-memory cards. This allows retrieving the data simply by replacing the SD-card. The unit is easy to operate: Just push in the SD-card and the logging file is automatically been created. All data from this point of time will be written to the SD-card. In case the file already exists, the new ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
Collection of precipitation for analysing organic components as well a mercury in the precipitation, the choice of the best fitting contact material like sample bottles and funnels is very important. In this cases PTFE and DURAN-glass are preferable to HD-polyethylene. For all types of instruments funnels and sample bottles are available in DURAN-glass. The separating system components for type ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
The precipitation sampler is used for the purpose of collecting the precipitation, depending of its configuration, in a large sample bottle, in 8 separate day or single samples or weekly samples. The individual sample bottle can be easily removed from the apparatus at the end of the period of measurement for laboratory analysis. Every single component which is used for measurement is made out of ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
The robust stand for precipitation sampler and analyzer allows a secure assembly and fixing to the ground. It is made out of steel, hot dip galvanised for outdoor use. The total height, stand base and instrument, will be between 1.5 m up to 1.8 m following the WMO recommendations. Customized stand bases for other collecting heights are available on request. The precipitation sensor can be also ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
A new kind of precipitation collector designed as a routine able bulk-collector to obtain samples for analysis of mercury traces. Funnel‑ and sample bottle heating enables year round operation. Cooling down to a temperature of 5 °C prevents the loss of volatile sample components. The borosilicate glass funnel helps prevent droplets adhering to the funnel and is pH neutral. Direct material, ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
For certain research projects it is not only interesting to sample the wet only deposition, but also the dry only deposition at the same place during periods of no precipitation. The DSC-unit allows this type of samples. It maintains open during periods of no rain, and will be closed with the coverlid during rainy periods automatically. The DSC-unit can be ordered heated and unheated. As material ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
Collection of precipitation for analysing inorganic components like acidifying components in the precipitation, the choice of the best fitting contact material like sample bottles and funnels is very important. In these cases HD-PE and silicone are preferable. For all types of instruments funnels and sample bottles are available in HD-polyethelene. The separating system components for type ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
Housings with snow top have a better aerodynamic profile and influences therewith the rain collection rate. The (high) snow top configuration can be (optional) constantly heated and therefore avoids that snow can be built up on the housing. This option is useful especially in areas with lots of snow ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
Continuous measurements of pH and conductivity yield instantaneous values for the amount of dissolved trace substances as well as the acidity. The synchronous measurement of the two parameters allows quality control of the results and a good estimate of the amount of free acid in the precipitation. Acidity and amounts of trace substances obtained by precipitation correspond closely to the ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
The NILU particulate fallout collector and the NILU precipitation collector have been developed to collect representative samples of dry and wet atmospheric particulate fallout for subsequent ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
The precipitation collectors NSA 181/NSA 181K and UNS 130 can optionally be equipped with a tipping bucket system. For Eigenbrodt precipitation monitors NMO 191 the tipping bucket is ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
Precipitation measurement over the global oceans onboard moving ships is a notoriously difficult task. Gauge based systems are prone to large undercatch errors due to fluctuating high wind speeds and flow distortion. While the errors are large for rainfall, the estimation of snowfall and mixed-phase precipitation is impossible. In addition to the precipitation accumulation, precise information ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
Precipitation contains a high amount of organic, inorganic and suspended substances. It is believed to be the major atmospheric purification process and has a high contribution to the trace element cycle in the atmosphere. The PRECIPITATION SAMPLER NSA 181 is equipped with a cover lid for a wet only application. This lid is opened only during deposition. So now it is possible to catch the wet ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
The precipitation sampler is used for the purpose of collecting the precipitation into a large single sample bottle. The individual sample bottle can be easily removed from the apparatus at the end of the period of measurement for laboratory analysis. Every single component which is used for measurement is made out of chemically neutral material and placed in a thermally insulated housing. At ...