- Home
- Equipment
Refine by
Fluke Environmental Equipment & Supplies
24 equipment items found
Manufactured by:Fluke Calibration based inEverett, WASHINGTON (USA)
PG7000™, already the world's most advanced piston gauge, takes another step ahead with the introduction of AMH™ automated mass handling technology. Finally, tedious, error prone and wear inducing manual mass manipulation can be eliminated from high end piston gauge operation… over the full pressure range, in a bench top system, at a reasonable ...
Manufactured by:Fluke Calibration based inEverett, WASHINGTON (USA)
The Fluke Calibration 96040A RF Reference Source enables you to simplify your RF calibration system by replacing many of the instruments and accessories that make up your current system. Its precision signal level and attenuation, high signal purity and precision low distortion modulation make this reference source superior to the general-purpose signal generators that are often used to calibrate ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
Put the Fluke 414D on your tool belt and reach beyond the common tape measure - up to 50 meters (165 ft). This professional-grade laser distance meter is fast and easy to use, improving accuracy and reducing measurement errors. You’ll save time and money at every ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
Fluke 225C Color ScopeMeter with Industrial Bus Health Test capability.The 225C offers the full functionality of a standard 200 MHz portable oscilloscope yet with the addition of powerful test capabilities for a wide variety of Industrial Bus systems. When in Bus health Test mode, the 225C ScopeMeter will automatically make an analysis of the electrical signals passing through the bus, and ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
The Fluke Ti400 Thermal Image is equipped with LaserSharpTM Auto Focus. Yes, there are other auto focus systems on the market but Fluke took it one step further so you get in-focused images, Every. Single. Time. Every infrared camera user knows that focus is the single most important thing to ensure when conducting an infrared inspection. Without an in-focus image temperature measurements may not ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
Sending a comprehensive report to a supervisor’s or customer’s mobile phone… Analyzing and reporting from without having to go back to the office… Multiple tools that report to you simultaneously… This is the world SmartView® Mobile app and CNX™ Wireless System. Available only from Fluke—where your results matter. ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
Easy to use, thanks to one-handed ‘point-and-shoot’ operation and intuitive on-screen guidance, the Ti32 Thermal Imager does not require specialist training to obtain accurate measurements. Just point at the target, focus the instrument, and it automatically adjusts the temperature range to show a crisp image. When the user pulls the trigger, the image and associated measurement data ...
Manufactured by:Fluke Calibration based inEverett, WASHINGTON (USA)
The 5080A Multi-Product Calibrator calibrates your analog and digital workload accurately and economically. Its high voltage and current compliance makes analog workload calibration easy and precise. And built-in protection circuitry protects it against damaging input ...
Manufactured by:Fluke Calibration based inEverett, WASHINGTON (USA)
The Fluke 8808A 5.5 digit multimeter has a broad range of functions, measuring volts, ohms and amps with a basic V dc accuracy of 0.015 %. It is remarkably easy to use, even by unskilled operators, because it makes the measurements you perform most often extremely easy and fast to ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. The Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600. Using the Fluke VCHEK™ LoZ low impedance measurement ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
The Fluke 321 and 322 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke 322 also offers DC voltage measurements and has a higher resolution for loads below 40 ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
The Fluke 985 Particle Counter is the preferred choice for HVAC and IAQ professionals. From filter testing to IAQ investigations, the Fluke 985 is the portable solution for determining airborne particle concentrations. Use the Fluke 985 to immediately respond to occupant complaints, or as part of a comprehensive preventive maintenance ...
Manufactured by:Fluke Calibration based inEverett, WASHINGTON (USA)
Triple point of water cells fill four critical purposes. First, they provide the most reliable way to identify unacceptable thermometer drift between calibrations—including immediately after a calibration if the thermometer has been shipped. Interim checks are critical for maintaining confidence in thermometer readings between calibrations. Second, they provide a critical calibration point ...
Manufactured by:Fluke Calibration based inEverett, WASHINGTON (USA)
Laminar flow elements for flow from 1 sccm to 100 slm; molbloc-Ls are laminar flow elements for use with molbox mass flow terminals. The molbloc flow path is the longitudinal, annular gap between a piston and a close fitting cylindrical bore in the molbloc body. Different molbloc ranges are obtained by varying the size of the gap. For high flow ranges (size 1E4 and above), a larger molbloc body ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
Take along the Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Do you need to calibrate transmitters? The 725's split display lets you view input and output values simultaneously. For valve and I/P ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
Sending a comprehensive report to a supervisor’s or customer’s mobile phone… Analyzing and reporting from without having to go back to the office… Multiple tools that report to you simultaneously… This is the world SmartView® Mobile app and CNX™ Wireless System. Available only from Fluke—where your results ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
The new IR FlexCam is a fully radiometric, portable, video rate infrared camera that combines unprecedented ease of use with advanced functionality. It's a combination that makes for a powerful, revolutionary infrared camera, capable of instantly detecting and pinpointing electrical, mechanical and other condition based problems. The FlexCam features a rugged, lightweight and ergonomic design. ...
Manufactured by:Fluke Corporation based inEverett, WASHINGTON (USA)
Increased sensitivity: Capturing and displaying temperature variances makes all the difference when diagnosing problems. The Fluke Ti480 PRO Infrared Camera has increased thermal sensitivity to capture minute differences and the latest Fluke technology for on-screen clarity to make it easy to visual issues in the field. With the enhanced measurement accuracy and the wider dynamic temperature ...