- Home
- Equipment
Refine by
Iris Environmental Equipment & Supplies
43 equipment items found
Premium
Manufactured by:FIBERSCOPE.net based inWinnipeg, MANITOBA (CANADA)
The IRIS PRO Video Borescopes are made in the US and encompass all the advantages of the best videoscopes in the industry. These were designed by professionals for professionals, with all the features of their class. They are specially designed to allow for quick inspections of turbines (compressor and hot section), pipes and tubes (welds, food processing, pharmaceutical), metal castings ...
Manufactured by:USA Borescopes based inClarksville, TENNESSEE (USA)
Quote available: 4 Ways Articulation. 7″ Monitor (1024 x 600px). Probe with integrated light source. Interchangeable Forward and Sideview Tips. Internal 16GB Storage. Probe comes in 3 diameters (4mm, 6mm, 8mm). Text Annotation. Waterproof up to 14.7 psi. Tip operating Temp -13F – ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
The Syscal Pro is an all-in-one multinode resistivity and induce polarization imaging system for environmental and engineering geophysical studies. The Syscal Pro gathers a 10 channels receiver and a 250W, 2000Vpp internal transmitter which make it the more powerful system of the Syscal range. This system allows to perform up to 10 measurements at a time and its switching board allow to work for ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
Specifically designed for very shallow, high resolution resistivity and induced polarization sounding and profiling, the Kid is the most compactof the Syscal range whilst retaining the well-known reliability and measurement accuracy of its counter ...
Manufactured by:Iris Power LP based inMississauga, ONTARIO (CANADA)
The Iris Power PPM-97 Corona Probe supplements on-line partial discharge measurements by more precisely locating the partial discharge to a particular slot and position, with the motor or generator winding energized by an external high voltage AC source. This offline test provides a method of testing the quality of bonding between the ground wall insulation layers in the slot sections of new ...
Manufactured by:Iris Power LP based inMississauga, ONTARIO (CANADA)
Portable monitoring system and diagnostic software for bearing and shaft vibrations on generators and motors. The CoDiS PMU package includes sensors, mounting accessories, cables, signal conditioning, data acquisition unit and diagnostic software to monitor and analyze vibration on generators and ...
Manufactured by:YSI Incorporated - a Xylem brand based inYellow Springs, OHIO (USA)
The iRIS 350 SDI-12 data loggers have been designed and constructed for use in harsh outdoor and industrial environments. The data loggers are housed in a special die-cast special corrosion resistant aluminum alloy case with a hard anodized finish. A neoprene gasket provides the seal allowing the data loggers to have a IP65 rating. The SDI-12 data loggers include an integral rechargeable 12V ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
The Syscal Junior is an all-purpose resistivity and induced polarization sounding and profiling system for environmental applications. The system is supplied as a standard sounding system capable of recording two measurements simultaneously, perfect for performing offset Wenner sounding arrays. The output current is automatically adjusted (automatic ranging) to optimize the input voltage values ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
The SYSCAL R1 Plus resistivity meter is specifically designed for medium-depth exploration. It combines a power source, transmitter up to a 200W or 800Vpp output voltage, and a 2 channels receiver in a single unit; its compactness makes it an effective tool for intensive resistivity ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
The Syscal Terra Switch is the new generation of resistivity & IP surveying system. It mixes recent electronics advances with the standards of resistivitymeters designed by IRIS Instruments for more than 30 years such as robustness, compactness, light weight and large temperature range (-20 °C to +70 ...
Manufactured by:Spasciani SpA based inOriggio, ITALY
MODELS AVAILABLE: Art. 10000240- White ventilated IRIS II Helmet. Art. 10000242- White ventilated IRIS II Helmet with card holder. Art. 10000241- White IRIS II Helmet without ...
Manufactured by:Iris-Mec Srl based inPoviglio (RE), ITALY
Complete depollution system with with fixed base, recovery and storage systems for fluids from ELV. Complete depollution system with fixed base, fluids recovery and storage ...
Manufactured by:Iris-Mec Srl based inPoviglio (RE), ITALY
Complete depollution station with fluid recovery system, load cells and tanks supervised by a PC provided with a specific software. Depollution station complete with all the equipment for fluids, oils and fuel recovery, is able to weigh the liquids sucked out during the depollution operations for the car at the end of the life (ELV). During the suction phase, the liquids are extracted and ...
Manufactured by:Iris-Mec Srl based inPoviglio (RE), ITALY
Complete mobile depollution system with container, depollution station, fluids recovery system and storage tanks. ISC is an mobile depollution station for ELV, positioned inside a carriage ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
The Elrec Pro is a 10 channel Induced Polarisation (IP) and Resistivity receiver designed to improve productivity when recording deep profiles and soundings. Beside the classical arithmetic and logarithmic modes, ELREC Pro also offers a Cole-Cole mode and twenty fully programmable windows for a higher flexibility in the definition of the IP decay curve. A setup wizard guides the operator through ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
The VIP series of Electrical transmitters are purposely designed for deep Induced Polarisation or Resistivity sounding investigations. The VIP 5000 internal microprocessor is capable of excellent current regulation in almost any load. Predominantly used as part of mineral exploration studies, the VIP series include three systems with different power specifications. This transmitter is generally ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
The TIPIX 2200 is a transmitter purposely designed for deep Induced Polarisation or Resistivity sounding investigations. This transmitter is generally used together with V-Fullwavers or Elrec Pro receivers. This entry-level instrument has been designed for an ease of use and for a good productivity together with a strong protection against misuse. This very robust device has proven to be reliable ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
The V-FullWaver systems were specifically developed for precise full waveform time domain Induced Polarisation, Resistivity and SP measurements. Each system is fully independent; incorporating its own power source, GPS module and digital memory for up to 3 months continuous recording. The V-FullWaver is a dual channel Induced Polarisation, Resistivity and SP receiver. Continually recording at ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
The I-FullWaver systems were specifically developed for precise full waveform time domain induced polarisation, Resistivity and self-potential measurements. Each system is fully independent; incorporating its own power source, GPS module and digital memory for up to 3 months continuous recording. The I-FullWaver sits in series between the injection electrode and transmitter (e.g. TIPIX, VIP) ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
The Syscal monitoring Unit is an automated system designed for the use of the Syscal Pro for monitoring survey. This unit connects the Rx and Tx batteries to the source of voltage of your choice (solar panel, wind turbine, isolated charger, ethanol fuel cell) when the Syscal is not acquiring. During the acquisition, the source of voltage is disconnected from the Tx and Rx batteries to avoid any ...