- Home
- Equipment
Refine by
Kracht Environmental Equipment & Supplies
39 equipment items found
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
Accordingly to its configuration - the Design principle is illustrated by the Sectional figure above - the KRACHT External Gear-Type Motor Series KM 1 is classified in the category of the so-called Gland-Type Bearing Motors.All essential functional parts as the gearing and the gland bearings are located in an aluminium housing manufactured of a high strength extrusion alloy which is closed on ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
KM series high pressure gear motors are mainly used in oil-hydraulic plants. They are suitable both for hydraulic fluids as well as mineral oil bases (DIN 51524/25) and engine oils {DIN 51511). The housing components are made from high-grade cast iron, the shaft and gears from hardened and ground case-hardening steel. The shafts are supported in multi-layer bearings that have excellent ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
The Type KF-F transfer pumps were developed specifically for use with fuels, especially for marine fuels. These need to be critically considered, especially regarding the lubricity. And above all, those with low sulphur. Diesel fuels (MGO/DMA) exhibit low lubricity, which cannot be determined through the ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
The measuring mechanism of the KRACHT Volume counter VCL0.1 for painting technology consists of a pair of gear wheels driven by fluid flow in accordance with the principle of operation of a gear motor. The measuring mechanism bearing system comprises radial and axial bearings. The sensor system is separated from the measuring compartment; there is no contact with the medium. The motion of the ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
Gear pumps KF are used for pumping a wide variety offluids. Gear pumps KF are distinguished especially bytheir wide range of variants which are assembled as required on the modular principle and also permit subsequent upgrade. The standard housing sections are of grey cast iron. The gear units are manufacturedfrom high-strength case-hardening steel, hardened andmounted in special multi-compound ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
The KRACHT SVC screw spindle flow meters exemplify durability, precise measurement accuracy, easy handling, and long-lasting economic benefits. Designed to withstand contamination and insensitive to pollution, these flow meters offer pulsation-free operation and low flow resistance. The SVC series includes models with encoders for maximum measurement resolution, ideal for process and test stand ...
Distributed by:Process Pump Sales Inc based inPoway, CALIFORNIA (USA)
Pump series BT and BTH are low speed gear pumps for transfering medium and high viscosity fluids, provided they have certain minimum amount of lubricating property, do not contain any solids and are chemically compatable with the materials of ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
Gear pumps KF are used for pumping a wide variety of fluids. Gear pumps KF are distinguished especially by their wide range of variants which are assembled as required on the modular principle and also permit subsequent upgrade. The pumps are also suitable for media with low lubricating ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
Conventional sealing gaskets are pushed to their limits with different applications. Typical applications are found in polyurethane facilities, refrigerating machines and vacuum facilities. For these applications, you have the possibility to equip the KF4/125...KF6/730 with a magnetic ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
The noise optimized pumps in the KF series are designed for conveying for medias with increased air content, predominantly for use as lubricating oil pumps in gears. Special measures prevent the otherwise normally increased noise present in auriferous gearoil. The noise levels do not exceed or only barely exceed the measurements with non-auriferous oils. Also, there is no noise spectrum shift to ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
The DV pressure valves are hydraulically pilot-controlled valves. They comprise a main valve and one or several pilot-controlled valves. The modular design permits using different pilot control valves which means a multitude of functions can be implemented. Along with pressure limiting and pressure control functions, this also includes special solutions such as pressure range switching valves and ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
KP series high pressure gear pumps are mainly used in oil-hydraulic plants. They are suitable both for hydraulic fluids as well as mineral oil bases (DIN 51524/25) and engine oils (DIN 51511). Manifold pump combinations are available as ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
KP series high pressure gear pumps are mainly used in oil-hydraulic plants. They are suitable both for hydraulic fluids as well as mineral oil bases (DIN 51524/25) and engine oils (DIN 51511). Manifold pump combinations are available as ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
KP series high pressure gear pumps are mainly used in oil-hydraulic plants. They are suitable both for hydraulic fluids as well as mineral oil bases (DIN 51524/25) and engine oils (DIN 51511). The housing components are made from high-grade cast iron, the shaft and gears from hardened and ground case-hardening ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
Displacement : 1.5...300cm3/r. Working pressure : 315 bar. Speed : ...4000 1/min. Viscosity ; 10...600 mm2/s. Media temperature : ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
The directional control valves WL4/10 consist of housing (1), control spool (5), centering springs (4) and operating solenoids (2, 3). The three-position directional valves are fitted with two solenoids and two springs. The two-position directional valves have one solenoid and one return spring. The operating solenoids are DC solenoids and are supplied through connectors A, B (6, 7) without ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
The pressure relief valve DBD is a directly-operated poppet valve for installation in the pipelines or as a clamp-in valve. The valve is used to safeguard the pressure of hydraulic systems up to pmax = 400 bar. For line installation, the housing has two connections with Whitworth pipe threads. Without housing, the valve cartridge can alternatively be screwed into the specified bore contour in any ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
Operating pressure : p = ... 320 bar. Max. flow capacity : pQ = ... 70 ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
The gear type flow meter VC by KRACHT GmbH is designed for high-precision and rugged fluid measurement applications. It delivers standardized and application-optimized solutions for various industries. The VC series includes multiple models tailored for different needs, such as VC with Encoder and VC with IO-Link technology. The VC meters offer wide measuring ranges, from as low as 0.008 l/min to ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
Hydraulic cylinders of the type series CNL are designed as a pure bolted construction. Cylinder heads and base consist of St 52-3. For the cylinder tubes, "seamless precision steel tubes", in accordance with DIN 2391, are used and a high-strength steel is used for the milled, polished and hard-chromium-plated piston rods. The piston and piston rod are sealed with compact seals. According to ...