- Home
- Equipment
Refine by
Lehmann Environmental Equipment & Supplies
17 equipment items found
Manufactured by:Hein, Lehmann GmbH based inKrefeld, GERMANY
Conventional HEIN, LEHMANN screening machines offer the ideal solution for all standard applications. The bolted/welded construction with unbalanced shaft or unbalanced motor drive keeps the maintenance expenses low and provides a long service ...
Manufactured by:Hein, Lehmann GmbH based inKrefeld, GERMANY
Conventional HEIN, LEHMANN screening machines offer the ideal solution for all standard applications. The bolted/welded construction with unbalanced shaft or unbalanced motor drive keeps the maintenance expenses low and provides a long service ...
Manufactured by:Lehmann-UMT GmbH based inPöhl, GERMANY
The inclined bed filter is used for fully automatic, continuous cleaning of cooling lubricants and process water. Its compact design means that a high level of cleanliness can be achieved even in conditions where space is at a premium. The filter system is suitable above all for metal processing, especially with graphite and aluminium, and can also be used in the chemicals industry, the ...
Manufactured by:Lehmann-UMT GmbH based inPöhl, GERMANY
The new compact filter is designed for the filtration of oil, water, emulsion and solutions with a minimum requirement of space. Working on the same principle such as paper belt filters, it can filter between 30 and 1500 l/m – according to the customer-specific ...
Manufactured by:Lehmann-UMT GmbH based inPöhl, GERMANY
The screw conveyor is used for transporting short, broken metal chips or small parts, especially steel, needle and cast iron chips. It can be implemented as an individual conveyor or an interlinked device if space is at a ...
Manufactured by:Lehmann-UMT GmbH based inPöhl, GERMANY
The magnetic filter is used for fully automatic, continuous cleaning of liquid media to remove ferromagnetic substances. The magnetic filter consists of a stainless steel housing with an electrically driven magnetic roll that is jacketed by a thin-walled stainless steel sleeve. Optionally, it can be equipped with high-performance neodymium magnets, and its modular construction means it can be ...
Manufactured by:Lehmann&Voss&Co. based inHamburg, GERMANY
The LEHVOSS Compounds division supports designers, design engineers and component manufacturers in defining the most suitable plastic for their component and thus in developing more powerful components with lower system costs. Customers benefit from our well-founded knowledge of materials and applications, the independent selection of raw materials and the decades of experience of the LEHVOSS ...
Manufactured by:Lehmann-UMT GmbH based inPöhl, GERMANY
The magnetic conveyor is used for transporting short, broken chips out of machine tools and similar plants, in particular when wear-resistant materials are used and if ferromagnetic substances have to be transported. Use as a combined conveying and filter system is also sensible, for example to achieve coolant/dirt separation at an early stage. Optionally, there is provision for integrating a ...
Manufactured by:Hein, Lehmann GmbH based inKrefeld, GERMANY
The spirals of these belts are alternately wound clockwise and anti-clockwise. A straight belt motion is achieved by that to a large extent. Through the tightly wound spirals, there results a large total cross section. Therefore a high tensile load is possible. In the case of belts which are driven through chains, this leads to possible small roll diameters and to a constrained leading of the ...
Manufactured by:Lehmann-UMT GmbH based inPöhl, GERMANY
The flat-bed filter is used for fully automatic, continuous cleaning of cooling lubricants and process water. It is characterised above all by a high level of purity. It is easy to maintain and has a long service life, making it one of the most cost-effective solutions combined with very low investment ...
Manufactured by:Lehmann-UMT GmbH based inPöhl, GERMANY
The chip redistributor is a system for transporting away various kinds of chips, for example from mechanical machining. The chips created are transported away from the workplace by a chip conveyor system. The chip redistributor is designed to distribute the conveyed chips over several ...
Manufactured by:Hein, Lehmann GmbH based inKrefeld, GERMANY
HL wire cloths in square and long mesh finish. HL wire cloths in square and long mesh finish are crimped and mechanically woven under pre-stressing to a tight compound. This gives the cloth a high vibration strength and long service ...
Manufactured by:Lehmann&Voss&Co. based inHamburg, GERMANY
Quality, experience, and expertise in chemistry – a winning mixture that characterizes LUVOBATCH® and LUVOADD. We deliver high-quality masterbatches and additives for practically every application in the plastics industry, from vehicle component through to packaging film. Our customers especially value the process engineering know-how that allows us to also develop special solutions ...
Manufactured by:Lehmann&Voss&Co. based inHamburg, GERMANY
A broad range of products for fluid filtration thanks to global supplier connections and in-depth knowledge of how products can be used and how they work are the strengths of our Filtration business unit. With their many years of experience, our employees will advise you on all aspects of precoat filtration, microfiltration and ultrafiltration. The services we offer include filtration trials and ...
Manufactured by:Lehmann-UMT GmbH based inPöhl, GERMANY
Scraper chain conveyors are used for transporting short, broken metal chips or small parts, particularly steel, needle and cast iron chips. It can be integrated as an individual conveyor with container or in a plant. A conveyor belt comprising two roller chains connected by steel strips transports the material being conveyed continuously from the base of the container to the discharge point. A ...
Manufactured by:Lehmann-UMT GmbH based inPöhl, GERMANY
The hinged belt conveyor is especially suitable to dealing with steel chips and woolly swarf as well as dry and wet processing. It can be implemented as an individual conveyor or an interlinked device. An endless slat-band conveyor transport the chips to the discharge ...
Manufactured by:Lehmann-UMT GmbH based inPöhl, GERMANY
The negative pressure suction filter cleans liquids such as coolant or process water without the use of filter aids, by extraction. It can be used in all kinds of areas such as grinding, turning, drilling, milling, lapping as well in graphite ...