- Home
- Equipment
Refine by
Mission Environmental Equipment & Supplies
21 equipment items found
by:Maxwell GeoSystems Ltd. based inKowloon, CHINA
The Entry level production management tool for monitoring progress vs programme and shift activities on small projects. As with Monitor it can be procured on a bulk (per job) licencing deal or on a project by project ...
Manufactured by:Nov Mission Pump Co., Ltd based inShijiazhuang, CHINA
This type Mechanical seal is suitfor MISSION Magnum pumps and MCM 250 series pump.The material is high density tungsten carbide,Greatly extended friction ...
by:Maxwell GeoSystems Ltd. based inKowloon, CHINA
Mission Builder as the name suggests adds technical data layers onto the jobs hierarchy in Mission Site. Each data layer is particular to each type of construction and allows businesses to standardise and control the way in which data is captured and recorded. Data layers ...
Manufactured by:Mission Communications, LLC based inNorcross, GEORGIA (US) (USA)
The Tank and Well system maintains the water level in storage tanks by automatically sending commands that signal remote well or booster pumps to turn on and off. The system relies on either a MyDro 850 or M800 remote terminal unit (RTU) and a transducer to measure the tank level. There are no radio networks, computers, or PLCs to maintain. It is low-cost and easy to set ...
Manufactured by:Nov Mission Pump Co., Ltd based inShijiazhuang, CHINA
The MISSION Magnum centrifugal discharge pumps are one of the most recognized and trusted names in the blender pump market due to their ability to successfully handle abrasive fluids while also handling a wide range of flow rates. Magnum pumps offer a broad selection of innovative features for a variety of general, demanding, and corrosive applications. Today's market conditions continue to ...
Manufactured by:Nov Mission Pump Co., Ltd based inShijiazhuang, CHINA
The MISSION Sandmsster line of centrifugal pumps includes all the abrasive-fluid handling features of the MISSION Magnum pump line in a more compact design and they can be adapted for hydraulic motor drive. Compared to the Magnum, the frame and shaft have been shortened to 4 in. to reduce the length of the pump. As an extension of the Magnum pump line, these pumps offer our quality manufacturing ...
Manufactured by:Mission Rubber Company LLC based inCorona, CALIFORNIA (USA)
Heavy-Duty, shielded couplings connect Cast Iron hubless soil pipe and fittings in sanitary and drain waste and vent (DWV) applications. For non-pressure, gravity flow applications only. Recommended for above and underground installations. Easy to install and ...
Manufactured by:Mission Communications, LLC based inNorcross, GEORGIA (US) (USA)
The M800 is a complete wireless monitoring and remote control system that enables users to identify trends with real-time streaming data and provides the ability to automatically or manually control remote ...
Manufactured by:Mission Communications, LLC based inNorcross, GEORGIA (US) (USA)
The M-110 has a solar power mode and makes a perfect low power rainfall measurement system. MISSION offers the M-110 pre-packaged and wired to perform remote rainfall measurements. This package includes a stand which ensures sturdy mounting, holds the solar panel and antenna, and has a built in leveling plate for the rain gauge. The stand holds the rain gauge three feet off the ground as ...
Manufactured by:Nov Mission Pump Co., Ltd based inShijiazhuang, CHINA
Naiional Oilwell Varco manufactures compact close coupled centrifugal pumps for the 1180, Magnum and 2500 Supreme pump ...
Manufactured by:Mission Rubber Company LLC based inCorona, CALIFORNIA (USA)
Designed for the repair, alteration and rehabilitation of large diameter gravity flow sanitary, DWV and storm sewer ...
Manufactured by:Mission Communications, LLC based inNorcross, GEORGIA (US) (USA)
The M110 and MyDro M150 are appropriate for monitoring most duplex lift stations. Two digital inputs (DIs) are typically used to monitor pump runtimes and starts. Another DI is used for high-level float monitoring and alarming purposes. The other DIs are available for items like phase fault, seal fail, or hatch door. The M800 or MyDro 850 RTU is appropriate at master lift or pump stations, where ...
Manufactured by:Mission Communications, LLC based inNorcross, GEORGIA (US) (USA)
The wireless Mission SCADA system can also work below ground in a sewer system to detect and report sewer surcharges and floods. Use the Mission Manhole Monitor to provide a waterproof CSO/SSO tracking and alarm system that mounts in a sewer just below the manhole lid. The enclosure houses all electronics, radio, and battery—yet is only about the size of a paperback ...
Manufactured by:Mission Rubber Company LLC based inCorona, CALIFORNIA (USA)
Shielded couplings connect Cast Iron hubless soil pipe and fittings in sanitary and drain waste and vent (DWV) applications. For non-pressure, gravity flow applications only. Recommended for above and underground installations. Easy to install and ...
Manufactured by:Nov Mission Pump Co., Ltd based inShijiazhuang, CHINA
The Magnum XP is ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive, and difficult to pump. The compact overall dimensions make it an excellent choice for high-volume mobile and stationary applications for which a small footprint is critical. Designed for continuous operation with minimal maintenance, this model is engineered to provide maximum seal life with ...
Manufactured by:Mission Rubber Company LLC based inCorona, CALIFORNIA (USA)
Dual-Tite, Multi-Tite or Extra Heavy gaskets connect hub and spigot Cast Iron soil pipe and fittings. For non-pressure, gravity flow applications only. Recommended for above and underground installations. Easy to install and ...
Manufactured by:Mission Rubber Company LLC based inCorona, CALIFORNIA (USA)
Flexible “Calder Style” shielded sewer couplings connect Clay, Type O Clay, Type 1 Clay, Extra Heavy Cast Iron, CIT, Schedule 40 Plastic, Thinwall Plastic, Trailer/Drain (EPDM) or Steel pipe in sanitary systems. For non-pressure, gravity flow applications only. Recommended for underground installations. Primarily used in the Western United States. Easy to install and ...
Manufactured by:Mission Rubber Company LLC based inCorona, CALIFORNIA (USA)
Flexible, “Calder Style” unshielded sewer couplings connect Clay, Type O Clay, Type 1 Clay, Extra Heavy Cast Iron, CIT, Plastic, Schedule 40 Plastic, Thinwall Plastic, Trailer/Drain (EPDM) or Steel pipe in sanitary systems. For non-pressure, gravity flow applications only. Recommended for underground installations. Primarily used in the Western United States. Easy to install and ...
Manufactured by:Nov Mission Pump Co., Ltd based inShijiazhuang, CHINA
Thick strong concentric casing with replaceable casing wear pad provides extended life over conentional volute designs. The concentric design minimizes turbulence and abrasive wear.The wear pad allows the casing to be repaired at a lower cost than replaceing the entire ...
Manufactured by:Mission Communications, LLC based inNorcross, GEORGIA (US) (USA)
Managers of larger wastewater treatment or water processing facilities sometimes prefer the data collected by Mission to be included with the client/server SCADA HMI that is part of their plant operations. Mission has provided this service to customers via the Open Platform Communications (OPC) Classic connection method for more than 10 years. In 2016, Mission released the newest connection ...