- Home
- Equipment
Refine by
Munters Environmental Equipment & Supplies
75 equipment items found
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
The DV Series droplet separators are a vane type separators. The gas flow charged with liquid droplets is directed through separator chambers which are designed for maximum effect on the gas ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
The ML1350 desiccant dehumidifier is designed to efficiently dehumidify in low moisture applications. Features include an internally sealed rotor unit, corrosion-resistant casing design, providing a precise balance for dehumidification, reactivation, and heat recovery airflows. The durable Aluzink® frame and access panels are ergonomically designed, allowing simple installation and ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DRIFdek-IL modular interlocking drift eliminators offer easy installation, self sealing design and excellent droplet separation. The overlapping design makes installation fast and watertight. No caulking or weather stripping is needed between the ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DCF is a series of advanced tailor made ready-to-install air intake systems for use in many application areas. They provide excellent protection against all types of droplets as well as particle filtration throughout a broad range of face ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DF 2500 is a ready-to-install droplet separator for use in many application areas. It is available in various material combinations and configurations to fit a wide range of operating conditions. DF 2500 droplet separator provides high efficiency droplet separation and low pressure drop, even at high face velocity, for energy saving operation. The droplet separator can be configured to most ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DF 3500 is a ready-to-install droplet separator for use as air intakes in marine and offshore applications. It is available in various material combinations and configurations to fit a wide range of operating conditions. DF 3500 droplet separator provides high efficiency droplet separation and low pressure drop even at high face velocity. The droplet separator can be configured to most individual ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DF 4800 is a ready-to-install droplet separator for use in many application areas. It is available in stainless steel and aluminum combinations and configurations to fit a wide range of operating conditions. DF 4800 droplet separator provides high efficiency droplet separation and extreme low pressure drop, even at medium face velocities, for energy saving ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DF 4200 droplet separator provides high efficiency droplet separation even under harsh operating conditions. The droplet separator can be configured to most individual performance and installation situations, providing a cost effective solution. Alternative material choices and drainage systems, as well as add-on features like flanges and protection mesh are just some of the configuration ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DF 4300 droplet separator provides high efficiency droplet separation and low pressure drop even at very high face velocity giving energy saving operation. The droplet separator can be configured to most individual performance and installation situations, providing a cost effective solution. Alternative material choices and drainage systems, as well as add-on features like flanges and protection ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DFF is a series of ready to install, tailor made, three stage air intake systems for use in special application areas. The DFF series not only provides excellent protection against all types of droplets but also filters particles at high air velocities. DFF has been designed for the supply air in marine propulsion systems and auxiliary equipment and for the provision of clean air for ventilation ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
The DH 2100-FGD (T 100) is a vane type droplet separator for horizontal gas flow. The DH2100-FGD with the panel design was first used in horizontal downstream ducts of FGD absorber towers. Most of the times an automated cleaning system is installed. This not only increases the lifetime of the entire system it also decreases the maintenance to a minimum. The gas flow charged with liquid droplets ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DH™ 4200 droplet separator profile when assembled into units forms a vane type separator for horizontal flow specially design for the heating, ventilation and air conditioning applications. The streamlined profiles with multiple bends ensure high liquid loads combined with high separation efficiencies. The profile is produced in talcum reinforced polypropylene. It can therefore be utilised ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DH 4300 droplet separator profile when assembled into units forms a vane type separator for horizontal flow. The streamlined profiles with multiple bends ensure high liquid loads combined with high separation efficiencies. The profile is produced in talcum rein-forced polypropylene. It can therefore be utilised in a wide range of processes under different operating conditions. DH 4300 droplet ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DS 8000 is a series of spin vane separators removing droplets for both vertical and horizontal gas flow. The equipment has especially been designed for separating larger amounts of coarse droplets at higher gas velocities from the gas stream. A ring of spin vanes set the gas flow in rotation. As a result, the liquid droplets are spun outwards, impinging on the separator wall and are subsequently ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
The system is typically installed in gas cleaning devices such as flue gas desulphurization absorbers and wet scrubbers. DV210 RF has several functions such as the protection of the downstream gas-gas heat exchanger (GGH) from droplets, the best available elimination of liquid carry-over escaping into the environment and finally the highest retention of liquid solvent avoiding losses during ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
Munters Easy Flow enables to master critical process conditions where there is either a high solid content in the gas thus a high risk of clogging or where there is a very high variance in the flow conditions leading to local malfunctions in the separation. This innovative technology concept increases the service life of coarse and fine separators in gas cleaning devices and equalizes uneven gas ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
Munters IDM is an advanced type of inlet distributor that is commonly used for introducing gas/liquid mixtures into a vessel or a column. It removes liquid slugs and optimizes the downstream gas flow. The liquid removal capacity of the IDM is very high, with an efficiency of around 90%. It is designed to handle very large liquid fractions and slugs, yet it has a low pressure drop and a very high ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
The technology behind Munters' VOC technology is our Zeolite rotor. The rotor is made up of hydrophobic zeolite which is an inorganic crystal with properties suited to adsorbing VOCs. Hydrophobic zeolite is a stable crystal. The zeolite's inert properties mean that it does not promote chemical reactions. It is also non-flammable to extreme temperatures and will not react with strong ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
The ComDry series is a range of desiccant dehumidifiers with high drying capacity, reliability and low energy consumption. The solid casing is excellent at withstanding corrosion and the dehumidifiers robustness makes it very versatile in a wide range of applications. They are also easy to stack and transport. Munters ComDry series is particularly suited to water and fire damage restoration ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
The Desiccant System Solution (DSS) offers a wide variety of material and components to fit most difficult applications for indoor and outdoor installation. A complete DSS system, ready for operation, consists in its standard design of components for the pre & post treatment, dehumidification rotor with reactivation and required fans for process and reactivation ...