- Home
- Equipment
Refine by
Prince Environmental Equipment & Supplies
21 equipment items found
Manufactured by:Prince based inHouston, TEXAS (USA)
Densfil® – High purity natural hematite; 4.9 ...
Manufactured by:Prince Technologies B.V. based inEmmen, NETHERLANDS
A Diode Array Detector (DAD) can add a lot of useful information in addition to the electropherogram. It creates spectra during the runs. These spectra be used to identify the peak, provided that a spectrum is available in the spectrum library. It is also very useful as a tool to determine peak purity. Only the slightest separations of two compounds that seem to form one peak, which can be ...
Manufactured by:Prince Manufacturing Corporation based inNorth Sioux City, SOUTH DAKOTA (USA)
1 -10 Work Sections. Extra Fine Spool Metering. Power Beyond Capability. Reversible Handle. Load Checks on Each Work Port. Hard Chrome Plated Spools. A Float Section can be Installed in any Location in Valve Assembly. Interchangeable Mounting With Other Popular “20” gpm Stack Valves. Optional Work Section with Pilot Operated ...
Manufactured by:Prince Manufacturing Corporation based inNorth Sioux City, SOUTH DAKOTA (USA)
Extended Length Notches for Very Fine Metering. Machined Internal Lands for Precise Control and reduced Dead Band. Low Standby Pressures. Spool Design for reduced Flow Forces. Low Spool Actuating Forces. Use of Standard Series 20 Inlet Sections (20I) and Tie Rod Kits. Same Mounting Pattern and Envelope as Standard Series 20 ...
Manufactured by:Prince Manufacturing Corporation based inNorth Sioux City, SOUTH DAKOTA (USA)
Economical monoblock construction of high tensile strength gray cast iron. Load check on each spool. Hard Chrome Plated Spools. Optional 4 Position Float and Joystick Handle. Differential poppet style relief, adjustable from 1500 to 3000 psi (also available in low pressure version adjustable from 500 to 1500 psi). Power beyond and closed center capability. Reversible Handle. Solenoid Actuated ...
Manufactured by:Prince Manufacturing Corporation based inNorth Sioux City, SOUTH DAKOTA (USA)
Economical monoblock construction of high tensile strength gray cast iron. Load check on each spool. Hard Chrome Plated Spools. No face seals on spools. Adjustable cartridge relief. Power beyond available. 4 Position Series Float Spool for loader boom. 4 Position Regen Spool for loader bucket. Molded rubber boot. Patented dual spool lock joystick ...
Manufactured by:Prince Technologies B.V. based inEmmen, NETHERLANDS
The PrinCE Next|840 is a start-up capillary electrophoresis system, comprised of an inlet autosampler with a flexible external capillary outlet. The system is supplied with a PC, a start-up kit and pre-installed PrinCE Next Clarity software for data-acquisition and analyses. It is designed for easy, user-friendly operation with fast and reliable precision for routine analyses, providing maximum ...
Manufactured by:Prince Technologies B.V. based inEmmen, NETHERLANDS
The PrinCE Next|870 is a fully flexible, automated capillary electrophoresis system, comprised of an inlet- and outlet autosampler, integrated DAD and configurable flexible external capillary outlet. The system’ DAD 190-610nm can be used simultaneously with a wide selection of external detectors. The system is supplied with a PC, a start-up kit and pre-installed PrinCE Next Clarity software ...
Manufactured by:Prince Technologies B.V. based inEmmen, NETHERLANDS
The PrinCE Next|875 is a fully flexible, automated capillary electrophoresis system, comprised of an inlet- and outlet autosampler, integrated DAD and configurable flexible external capillary outlet. The system’ DAD 190-1010nm can be used simultaneously with a wide selection of external detectors. The system is supplied with a PC, a start-up kit and pre-installed PrinCE Next Clarity ...
Manufactured by:Prince based inHouston, TEXAS (USA)
Oil Mud Thinner – Strong oil mud thinning surfacant for high active solids ...
Manufactured by:Prince based inHouston, TEXAS (USA)
Glass Beads (Coarse, Fine) – Soda-lime glass beads; crush strength > 15,000 ...
Manufactured by:Prince Technologies B.V. based inEmmen, NETHERLANDS
LASER Induced Fluorescence detectors are extremely powerful, typically capable of emitting light of a very well defined wavelength with an intensity of 1-40 mW. Thus the maximum possible number of molecules can be excited, resulting in the best possible limits of ...
Manufactured by:Prince Manufacturing Corporation based inNorth Sioux City, SOUTH DAKOTA (USA)
Standard Features: Standard duty cycle. Reduced weight. Optional shaft configurations. Smaller Housing. Internally splined 1 3/8" diameter drive shaft, 6 tooth or 21 tooth. Up to 40 gallons a minute. 2250 PSI Max operating pressure. Slips onto tractor PTO shaft (no gear box ...
Manufactured by:Prince Manufacturing Corporation based inNorth Sioux City, SOUTH DAKOTA (USA)
Heavy duty welded construction. 3000 PSI. Bore sizes from 2.5" to 4.5". Stroke sizes 6" to 60". Chromed, ground & polished piston rod. Skived tubing. Ductile iron piston. Thread-in ductile gland. Urethane u-cup, metal encased wiper, teflon cap seal and wear ring. Crosstube end fittings with grease ...
Manufactured by:Prince Manufacturing Corporation based inNorth Sioux City, SOUTH DAKOTA (USA)
Economical monoblock construction of high tensile strength gray cast iron. Load check on each spool. Hard Chrome Plated Spools. Optional 4 Position Float on 1st spool. Differential poppet style relief, adjustable from 1500 to 3000 psi (also available in low pressure version adjustable from 500 to 1500 psi). Power beyond and closed center capability. Reversible Handle. Solenoid Actuated Option ...
Manufactured by:Prince Manufacturing Corporation based inNorth Sioux City, SOUTH DAKOTA (USA)
The PRINCE valve model SS is a manual 3-way 2 position selector valve. This valve will allow one pump source to supply two circuits. With the standard selector spool pulling the spool out diverts oil to port nearest handle, pushing the spool in diverts oil to the port away from the handle. The valve has an inlet on both the bottom and front of the valve body. Special options include lever handle ...
Manufactured by:Prince Manufacturing Corporation based inNorth Sioux City, SOUTH DAKOTA (USA)
The PRINCE valve model RD-1800 is a direct acting ball/spring type pressure relief. The valve is compact and simple in design. This type relief is fast opening and is well suited for pressure spike protection. The performance curves below indicate the low cracking pressure typical to ball/spring reliefs. Please refer to the model RV relief for a system pressure relief. The valve is available with ...
Manufactured by:Prince Manufacturing Corporation based inNorth Sioux City, SOUTH DAKOTA (USA)
Standard Features: 1-10 Sections Per Valve Bank. Load Checks On Each Section. Hard Chrome Plated Spools. Compact Construction. Enhanced Metering Section Available in both the High and Low Sections. Differential Poppet Style Relief, Adjustable from 1500 to 3000 psi (Also available in Low Pressure Version Adjustable from 500 to 1500 psi). Power Beyond Capability. Reversible Handle. Mid-Inlet and ...
Manufactured by:Prince Manufacturing Corporation based inNorth Sioux City, SOUTH DAKOTA (USA)
Standard Features: Economical monoblock construction of high tensile strength gray cast iron. Load check on each spool. Hard Chrome Plated Spools. Optional 4 Position Float and Joystick ...
Manufactured by:Prince Manufacturing Corporation based inNorth Sioux City, SOUTH DAKOTA (USA)
Standard Features: High duty cycle. Use in circuits with motors. Better at higher temperatures. Increased wear resistance. Internally splined 1 3/8" diameter drive shaft, 6 tooth or 21 tooth. Up to 40 gallons a minute. 2250 PSI Max operating pressure. Slips onto tractor PTO shaft (no gear box required). ...