- Home
- Equipment
Refine by
Applications
- Measurement solution for on-line carbon bed system
- Measurement solution for WID Emissions Monitoring
- Measurement solution for QAL2 EN 14181
- Measurement solution for organic vapour speciation
- Measurement solution for ambient air workplace monitoring
- Measurement solution for Perflurocarbon (PFC) emissions from aluminium industry
- Measurement solution for formaldehyde FTIR measurement
- Measurement solution for high NH3 monitoring from wastewater
Protea Environmental Equipment & Supplies
43 equipment items found
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
For gas sampling, Protea can provide sample lines of PTFE or PFA of various diameters and lengths at low cost. Sample lines can be provided 'bundled' into sets with gas fittings installed, ready to be used out of the ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
For measurement of oxygen (O2), the zirconia (ZrO2) lambda sensor is used by Protea. This sensor responds to the difference in oxygen concentration on the sample gas side of the sensor, compared to the reference side (ambient air). This response manifests itself as a non-linear induced voltage. This voltage is linearised and calibrate via electronics to give a concentration reading in %Volume. ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
In order to achieve gaseous calibrations of solvents that are liquid at room temperature, Protea has developed our evaporation calibrator. This unit uses a syringe pump to control accurate liquid doses into a heated carrier gas stream. This allows ppm levels to % Volume levels of gas calibrations to be carried out for solvents. The evaporation methodology is also used to generate calibrations of ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Protea’s gas analysers are extractive gas analysers and as such we need to ensure repeatable, consistent sample flow is provided to the equipment. The choice of pump is of great importance to ensure high uptime of analytical equipment. Protea can supply low-cost, low flow sample pumps for mobile applications. For sampling of corrosive gases, correct choice of pump diaphragms and seals is ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The atmosFID Total VOC Analyser is designed for Continuous Emissions Monitoring (CEM) of gaseous VOC emissions from a wide range of sources – waste incineration, combustion sources, paint shops and manufacturing processes. As a 19” rack analyser it can be provided in a complete fixed emissions system from Protea, or can be used as a standalone analyser. With quick measurement time and ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The 204M is a transportable CEM based on FTIR technology. Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be. With pre-loaded calibration methods for 28 gas species, automatic nitrogen purging, in-built pressure and temperature alarms, analogue and digital I/O it is a complete site-ready back up ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
atmosFIRt is the latest generation of FTIR gas analyser technology from Protea in a portable or mobile form. The atmosFIR system improves upon previous FTIR technology and represents one of the most cost-effective and flexible analytical products on the market today. At the heart of atmosFIR is a high-resolution, robust and proven FTIR spectrometer offering high signal throughput, low-noise and ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
atmosFIR EX is an ATEX certified gas analyser system for measurement of industrial gases in a Zone 1 or Zone 2 area, providing a complete EX certified gas measurement system that meets both the sampling of non-flammable and flammable gases, utilizing Protea’s multigas atmosFIR FTIR gas analyser ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Protea 2000 In-Situ Infra-red gas analyser connected to a Protea Control Unit forms the basis of a Continuous Emission Monitoring System (CEMS). The Stack Mounted In-Situ analyser monitors the stack gas without the need for any sample handling equipment making it a cost effective solution to Continuous Emission Monitoring and Process applications. The analyser monitors the stack gases ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Protea P300 is an infra-red (IR), extractive multi component analyser to provide analysis of up to six gas-phase or liquid process ...
Manufactured by:Delta Instrument LLC based inNorthvale, NEW JERSEY (USA)
The Protea Analyzer Control Unit (ACU) controls and processes the raw data from up to six Protea Continuous Emission Monitoring systems and generates, displays and transmits concentration readings in customer specified units. In addition, the ACU can also collect data from third party instruments measuring, for example, dust (opacity), oxygen, temperature, pressure and ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Quadrupole Mass Spectrometer Analyser System for low volume, quick responding gas measuring with large dynamic range Protea’s ProMass analyser is a compact, robustly designed semi-portable Quadrupole Mass Spectrometer (QMS) instrument incorporating all the latest mass spectrometer and vacuum pumping technology. ProMass can be supplied in portable carry case or a 6U 19” rack module for ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
atmosFIR is the successor to Protea's previous emissions monitoring FTIR systems, keeping all the features that users found valuable in achieving their measurement results, but offering the benefits of the new atmosFIR platform with increased portability, lower ownership costs and increased measurement performance. atmosFIR can be considered a simple multi-gas analyser for combustion gas ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
For spectroscopic absorption measurements of gas and liquid phase samples, correct choice of gas cell is paramount. Protea can supply a complete system with optimum sample cell, or we can provide a sample cell for your current instrument. We can provide FTIR gas cells, laser gas cells, FTIR liquid cells and process flow ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The ST5 is the next generation isokinetic sampler, developed to be efficient, rugged, accurate and user friendly. The perfect companion for stack testers. The ST5 includes all the measuring sensors inside its robust structure making it a single practical device to be taken on the stack and reducing the need of maintenance. Meets and exceeds the requirements defined in the sampling methods such as ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The ST5 is the next generation isokinetic sampler, developed to be efficient, rugged, accurate and user friendly. The perfect companion for stack testers. The ST5 includes all the measuring sensors inside its robust structure making it a single practical device to be taken on the stack and reducing the need of maintenance. Precise isokinetic condition, sampling flowrate is directly controlled ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Protea’s in-house Temperature Control Unit (TCU) has been designed to allow simple use of heated sample lines and heated sample probes with Protea’s range of gas analyser. The controller unit contains PID control for accurate set-point of heated sampling equipment, such as at 180°C for incineration monitoring applications. The design of the controller has taken into account the ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Protea’s range of core gas analysers use Windows-based PCs for analyser control and data storage. For use in industrial process and emissions measurement applications a rugged and robust analyser controller is required. ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Introducing Protea's new range of laser gas analysers - Solus. The Solus platform represents an extension of Protea's spectroscopic gas analysis equipment into laser based technology, allowing for highly selective, quick response and low range measurements of 1 or 2 gases in a cost-effective, re-configurable ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
For a complete transportable measurement solution of up to 10 sample points, the Solus Multipoint analyser is ideal for ambient air and livestock monitoring applications of Ammonia (NH3). Ammonia is a primary measurement parameter under the Verification of Environmental Technologies for Agricultural Production (VERA) Test Protocol for Livestock Housing and Management ...