- Home
- Equipment
Refine by
Protek Environmental Equipment & Supplies
13 equipment items found
Manufactured by:Tessilbrenta Srl based inPove del Grappa (VI), ITALY
Protek by Tessilbrenta is a special protective and absorbing nonwoven felt. It can be available in white or multi color. Specially designed for protecting floors and working tops from strokes and liquids, it is perfect for various uses. ...
Manufactured by:Protek Specialty Co. based inHouston, TEXAS (USA)
The Manifold Primer, aka Water Trap, (MP) is a device positioned between a water pump being primed and a source of vacuum pulling the water. It is designed to stop water flow when water reaches it. As a manifold primer, it is used when the vacuum source is the intake manifold of a multiple-cylinder gasoline or LP gas engine, or brake booster of a vehicle. As a water trap, it is used when the ...
Manufactured by:Protek Specialty Co. based inHouston, TEXAS (USA)
The Manifold Primer, aka Water Trap, (MP) is a device positioned between a water pump being primed and a source of vacuum pulling the water. It is designed to stop water flow when water reaches it. As a manifold primer, it is used when the vacuum source is the intake manifold of a multiple-cylinder gasoline or LP gas engine, or brake booster of a vehicle. As a water trap, it is used when the ...
Manufactured by:Protek Safety & Controls Ltd. based inCalgary, ALBERTA (CANADA)
Mimics Gas Sensor Display (when applicable). Remote calibration of Gas Sensor. Remote configuration of gas detector parameters. Complete Diagnostic Information (varies by sensor attached). UDM-002 combination of detectors can be LEL/LEL, H2S/H2S, LEL/H2S, etc.. 4-20mA output signal pass through from gas detector. Certified for Zone 1 and the UDM Electronics are also Certified for Zone 2 (no seals ...
Manufactured by:Protek Safety & Controls Ltd. based inCalgary, ALBERTA (CANADA)
Mimics Gas Sensor Display (when applicable). Optional Relay Contacts. Remote calibration of Gas Sensor. Remote configuration of gas detector parameters. Complete Diagnostic Information (varies by sensor attached). UDM-002 combination of detectors can be LEL/LEL, H2S/H2S, LEL/H2S, etc.. 4-20mA output signal pass through from gas detector. Certified for Zone 1 and the UDM Electronics are also ...
Manufactured by:INOMETA GmbH, part of the AVANCO Group based inHerford, GERMANY
PROTEK Hard Metal Coatings by INOMETA are engineered for high-performance and longevity, primarily using tungsten or chromium carbide. These coatings are designed to be applied to a variety of roll materials, enhancing their service life and efficiency. Their application is vital in industries dealing with chipping, forming, and conveying abrasive materials, where wear resistance is critical. ...
Manufactured by:Protek Specialty Co. based inHouston, TEXAS (USA)
The Hand Diaphragm Primer Pump (DP) is an air pump that creates vacuum suction in a centrifugal pump priming line and pulls water up into the pump to prime it. These centrifugal pump primers are popular for their portability and simplicity. Protek Specialty Diaphragm Primer Models: DP5, DP7, and DP9 - The DP primer has a flapper check valve in the diaphragm and a disk check valve at the bottom of ...
Manufactured by:Protek Specialty Co. based inHouston, TEXAS (USA)
Our POWER PRIMERS are built for fast, efficient priming in pump installations with high suction lifts or extra long suction lines. Here at Protek, we offer AC or DC units for a variety of applications, including automatic priming systems. Ideal for large, diesel-powered irrigation ...
Manufactured by:Protek Specialty Co. based inHouston, TEXAS (USA)
Exhaust Primers (EP) are air operated primers comprised of an Ejector and cast iron Adapter that has a cap and handle attached. Unit operates on low engine exhaust pressure or air pressure from other sources. When the exhaust valve (adapter cap) is closed, gases are directed through ejector, and water is drawn to pump by ejector ...
Manufactured by:INOMETA GmbH, part of the AVANCO Group based inHerford, GERMANY
The PROTEK composite coatings by INOMETA represent a substantial advancement in surface technology, demonstrating high-performance characteristics through the incorporation of fiber-reinforced and ceramic-filled plastic layers. These innovative coatings combine a strong plastic matrix with ceramic particles and glass-carbon fibers, affording them exceptional adhesion strength and abrasion ...
Manufactured by:INOMETA GmbH, part of the AVANCO Group based inHerford, GERMANY
INOMETA's PROTEK® non-stick coatings are engineered using advanced polymers, including fluoropolymers and PFAS-free systems, to create low-energy surfaces that resist adhesion of substances like adhesives, resins, and paints. These coatings offer targeted surface structures with excellent hardness to minimize contact surfaces, leading to increased wear resistance. Suitable for a wide range of ...
Manufactured by:INOMETA GmbH, part of the AVANCO Group based inHerford, GERMANY
INOMETA's PROTEK ceramic coatings are specialized thermal-sprayed coatings crafted from ceramic materials, applied to protect CFRP/GFRP rollers and aluminium components from extreme temperatures and abrasive environments. Utilizing a composition of titanium, aluminium, and chromium oxides, these coatings deliver exceptional resistance against frictional and sliding wear, making them ideal for ...
Manufactured by:INOMETA GmbH, part of the AVANCO Group based inHerford, GERMANY
INOMETA's PROTEK metal coatings offer high-quality surface solutions for CFRP/GRP, aluminum, and steel rollers used in high-performance machinery. These coatings serve multiple purposes, including corrosion and wear protection, repair of fitting surfaces, and diameter enhancement. They are engineered using application-specific metal alloys to deliver durable and reliable performance across ...