- Home
- Equipment
Refine by
Rle Environmental Equipment & Supplies
58 equipment items found
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
Fill cutouts in raised floors with RLE’s grommets and see an immediate improvement in airflow and ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
RLE offers two different damper options to help you fine tune airflow in your data center. While our chamfer and slotted panels include our patented stratification fin, the addition of dampers can help adjust airflow down to the individual server ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
If you’re pulling panels in your facility, make sure you have the right tools for the job. Panel lifters help you lift panels effectively and safely – without damaging panels or putting yourself at risk of injury. We stock and supply lifters for both solid and perforated panels as well as mounting hardware and brackets for easy storage. ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
Rigid containment is the most effective way to isolate hot and cold air in any facility and gives your space a clean, finished, professional look. Thermal containment isolates hot and cold air, helps eliminate hot spots, and ensures only the hottest air is returned to the CRAC unit. This facilitates lower set points, helps prevent down time, and can lengthen the life of IT ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
Every facility has those small spaces where airflow is an issue – whether it’s cabling holes in the flooring from a previous facility configuration or narrow spaces between the flooring and the racks. Use our foam to fill these small spaces and gaps, in turn optimizing your facility’s airflow. This flame rated foam is sold in 24″x24″x2″ sheets which are ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
Digital outputs are designed to be wired to one remote system, but users often require the signal to be sent to multiple systems – but wiring a single output to two remote panels can cause damage to the remote panels’ ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
The BMS-WiNG leverages RLE’s WiNG wireless sensor technology and allows it to integrate via protocols into any building management system (BMS) or alarm monitoring ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
The SeaHawk 10K distance-read leak detection controller monitors up to 10,000 feet (3,048 meters) of sensing cable. It is compatible with all SeaHawk sensing cables and the SeaHawk SD-Z spot ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
Three Zones of Integrated Leak Detection. The BMS-LD3Z provides three zones of RLE’s patented leak detection that directly integrates via protocols into any building management system (BMS) or alarm monitoring system. Pair the BMS-LD3Z with RLE’s SeaHawk sensing cables and spot detectors to monitor for conductive fluid and caustic chemical leaks and integrate this information directly ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
The LDRA6 accommodates six inputs that can be configured for zone water detection or as remote alarm annunciators. An LDRA6 can monitor for both leaks & alarms generated by networked ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
Patented Leak Detection Delivered Via Wi-Fi. Whether you’re using a WiNG-MGR or a BMS system, the WIFI-LD allows you to leverage your existing Wi-Fi network to monitor for conductive fluid leaks in your facility. The WIFI-LD continuously monitors your facility – it checks for leaks and ensures cable continuity once every minute and sends a packet immediately after detecting an alarm ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
The SeaHawk LD1000 single zone leak and water detection controller monitors up to 1,000 feet (305 meters) of sensing cable. It is compatible with all SeaHawk sensing cables and SeaHawk SD-Z and SD-Z1 spot detectors. As a stand-alone leak detection controller, the LD1000 features an audible alarm and three LED indicators. It is ideal for small areas, facilities where the sensing cable or spot ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
The SeaHawk LD310 single zone leak detection controller monitors up to 300 feet (91 meters) of sensing cable. It is compatible with all of RLE’s leak detection sensing cables, as well as SD-Z and SD-Z1 spot ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
Patented Protection From Even The Smallest Leaks. RLE’s conductive fluid leak detection sensing cable (SC) reliably detects the presence of water leaks and other conductive fluids. It’s one of our hallmark products, and we’ve held the patent for this cable since ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
Designed to work with all of RLE’s leak detection controllers, the SD-Z spot detector can be connected to other SD-Z units or to sensing or non-sensing cable. The SD-Z can be used with either zone or distance-read leak detection controllers. When used with a distance-read system, the SD-Z simulates 50 feet of cable – 25ft. (7.62m) from the male connector to the SD-Z, and 25ft. ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
Direct Connection to Your Leak Detection Controller. The SD-Z1 is a single zone spot detector designed to work with zone leak detection systems including the F200, LD310, LD1000, and LDRA6. RLE recommends using only one SD-Z1 per zone. Spot detectors are ideal for small spaces, and are the most economical way to detect fluids in confined areas, such as condensation drip ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
The SD-RO1 is a single zone spot detector with one relay output. It can be used in conjunction with any product that accepts a digital dry contact input. Spot detectors are ideal for small spaces, and are the most economical way to detect fluids in confined areas, such as condensation drip pans. Leak Detection With A Relay Output. ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
Leader cable and an EOL are necessary components for any leak detection system and are sold with most SeaHawk leak detection controllers. Since sensing cables cannot attach directly to a controller, the 15-foot (4.57 meters) leader cable connects the sensing cable to any SeaHawk leak detection controller. ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
Whether you’re using a WiNG-MGR or a BMS system, the WIFI-TH allows you to leverage your existing Wi-Fi network to monitor environmental conditions in your ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
Probe-style sensors on a 25’ leader cable allow you to leverage your existing Wi-Fi network to monitor environmental conditions in every corner – hidden or visible – of your ...