- Home
- Equipment
Refine by
Ross Environmental Equipment & Supplies
26 equipment items found
Manufactured by:Can-Ross Environmental Services Ltd. based inOakville, ONTARIO (CANADA)
Envirodrain is a preventative oil-stop system designed to avoid the huge costs associated with transformer and coolant oil containment and clean-up. Our drain system is installed at a fraction of the cost of mechanical pump separator systems, with greatly reduced maintenance ...
Manufactured by:Ross Valve Mfg Co., Inc. based inTroy, NEW YORK (USA)
The deep well pump control valve shall be located off a tee connection from the main line in order to blow off air or sand particles agitated by the pump starting. Because the valve is fully open when the pump starts and then slowly closes, it effectively discharges unwanted media from the system before water flows through the main line. In addition, the valve insures a smooth stopping and ...
Manufactured by:Can-Ross Environmental Services Ltd. based inOakville, ONTARIO (CANADA)
Can-Ross permanent harbour boom is a heavy duty boom designed for permanent installations where harsh conditions are prevalent and when long service life is required. Two of the most popular applications for this boom are around fuel docks and water intakes/outfalls. The operating environment that this boom most likely would be subjected to is the impact from debris and concentrated hydro ...
Manufactured by:Ross Valve Mfg Co., Inc. based inTroy, NEW YORK (USA)
The AWWA C507 ball valve shall be Metal to Metal Ball Valve (Model MSBV) as manufactured by Ross Valve Manufacturing Co., Inc. It shall be a full-ported valve (Pressure Class 150 -175 psi maximum differential pressure (cast iron) or Pressure Class 250/300 - 350 psi maximum differential pressure (ductile iron)) and shall be complete with valve operating mechanism, valve actuator and accessories as ...
Manufactured by:Can-Ross Environmental Services Ltd. based inOakville, ONTARIO (CANADA)
Drum Covers are used to protect drum tops from leaks or drips which often occur when manually pumping hydrocarbons from 45G drums. Keep your work environment clean on contaminant free with drum ...
Manufactured by:Can-Ross Environmental Services Ltd. based inOakville, ONTARIO (CANADA)
This product is also available in Oil Only Absorbent Booms 5″ x 10′, Oil Only Absorbent Booms 8″ x 10′, Oil Only Absorbent Double Booms 5″ x 10′, Oil Only Absorbent Pillow Booms 8″ x 24″. Absorbent booms are floating barriers used to contain a spill on a temporary basis. Used to reduce the possibility of polluting shorelines and other resources, ...
Manufactured by:Ross Valve Mfg Co., Inc. based inTroy, NEW YORK (USA)
The solenoid operated valve shall be globe (inline) or angle (90 degree) body with flanged end connections, be fully mounted, external solenoid pilot operated, with free floating piston (operated without springs, diaphragm or levers). It shall contain a single full-ported seat, with seat bore equal to size of valve. The minimum travel of the piston shall be equal to 25% of the diameter of the ...
Manufactured by:Can-Ross Environmental Services Ltd. based inOakville, ONTARIO (CANADA)
Can-Ross Drip Berms will protect any ground or floor from hazardous leaks and drips. Simply place a drip berm anywhere where leaks or drips may occur, and the liquid will be adsorbed into the pad housed inside the drip berm. Can-Ross Drip Berms are designed for numerous applications including military, construction, industrial and many ...
Manufactured by:Can-Ross Environmental Services Ltd. based inOakville, ONTARIO (CANADA)
Can-Ross Spill Berms are designed to meet any portable secondary containment requirement. Simply unfold where you wish to set your spill berm up, insert your aluminum L-brackets in each pocket, and your spill berm is ready for action. Can-Ross Spill Berms are designed for numerous applications including military, construction, industrial and many ...
Manufactured by:Can-Ross Environmental Services Ltd. based inOakville, ONTARIO (CANADA)
Can-Ross Spill Berms are designed to meet any portable secondary containment requirement. Simply unfold where you wish to set your spill berm up, insert your aluminum L-brackets in each pocket, and your spill berm is ready for action. Can-Ross Spill Berms are designed for numerous applications including military, construction, industrial and many ...
Manufactured by:Ross Valve Mfg Co., Inc. based inTroy, NEW YORK (USA)
The main valve shall be comprised of three main sections, namely the valve body: the fixed plate, and the linear plate. The valve body shall be wafer style, capable of bi-directional flow, and shall be suitable for vertical or horizontal installation. The fixed and linear plates shall be surface ground on the mating surfaces to minimize leakage, and shall incorporate a dielectric link between the ...
Manufactured by:Ross Manufacturing Co,Inc. based inBrownsville, TENNESSEE (USA)
Ross Manufacturing's Rack and Pinion Ceiling Gates are manufactured to meet the most demanding of dry bulk solid material handling applications. Durable mechanical rack and pinions and heavy 8 Ga. construction ensures extended life compared to many competitor's 10 Ga. standard. Materials available are galvanized, mild steel, AR steel, and stainless steel. Each side uses a 1" 2-bolt flange bearing ...
Manufactured by:Ross Manufacturing Co,Inc. based inBrownsville, TENNESSEE (USA)
Depending on the material being moved a plastic bucket just might not be able to handle the job. That's why we also offer a range of metal and ductile iron buckets. Let us help with buckets from Tapco, 4B, and GrainBelt. Metal buckets come in a range of styles including fabricated, pressed steel, bottomless and more. We can make sure that you get a great price and the right buckets for your ...
Manufactured by:Ross Manufacturing Co,Inc. based inBrownsville, TENNESSEE (USA)
Ross Manufacturing Company manufactures and distributes screw conveyors and screw conveyor components for all industries. Screw conveyor constructions available are galvanized, mild steel, and stainless steel, as well with numerous styles to fit your exact specifications. Screw conveyor components come in an array of options to meet the most demanding applications. Let the experienced staff at ...
Manufactured by:Ross Valve Mfg Co., Inc. based inTroy, NEW YORK (USA)
The pump control valve shall be globe (inline) or angle (90 degree) body with flanged end connections, be fully mounted, external pilot operated, with free floating piston (operated without springs, diaphragm or levers). It shall contain a single full-ported seat, with seat bore equal to size of valve. The minimum travel of the piston shall be equal to 25% of the diameter of the seat. For true ...
Manufactured by:Ross Manufacturing Co,Inc. based inBrownsville, TENNESSEE (USA)
When your facility requires square spouting for greater capacity you need to call us at Ross. Our quality manufactured square spouting is available in seam welded or removable top styles and has a variety of options available in lining materials and thicknesses. Square spouting is available in mild steel painted or galvanized at the same price and is also available in stainless steel. The ...
Manufactured by:Can-Ross Environmental Services Ltd. based inOakville, ONTARIO (CANADA)
Suitable for use in rivers, tidal currents and harbours with limited (1m) wave conditions: angled deployment in currents up to approximately 4.0 knots. 24 inch overall height oil containment boom in 50 foot sections, made of UV inhibited PVC , specification to be 22 oz. per square yard ...
Manufactured by:Ross Valve Mfg Co., Inc. based inTroy, NEW YORK (USA)
The pressure reducing valve shall be globe (inline) or angle (90 degree) body with flanged end connections, be fully mounted, external pilot operated, with free floating piston (operated without springs, diaphragm or levers). It shall contain a single full-ported seat, with seat bore equal to size of valve. The minimum travel of the piston shall be equal to 25% of the diameter of the seat. For ...
Manufactured by:Ross Valve Mfg Co., Inc. based inTroy, NEW YORK (USA)
The pressure reducing valve shall be globe (inline) body with flanged or female NPT end connections, be fully mounted, external pilot operated, with free floating piston (operated without springs, diaphragm or levers). It shall contain a single full-ported seat, with seat bore equal to size of valve. The minimum travel of the piston shall be equal to 25% of the diameter of the seat. The piston ...
Manufactured by:Ross Valve Mfg Co., Inc. based inTroy, NEW YORK (USA)
The flow control valve shall be globe (inline) or angle (90 degree) body with flanged end connections, be fully mounted, external solenoid pilot operated, with free floating piston (operated without springs, diaphragm or levers). It shall contain a single full-ported seat, with seat bore equal to size of valve. The minimum travel of the piston shall be equal to 25% of the diameter of the seat. ...