- Home
- Equipment
Refine by
Sri Environmental Equipment & Supplies
31 equipment items found
Manufactured by:Sud Robinetterie Industrie (SRi) based inMARSEILLE, FRANCE
Two parts body cast or forged steels. Soft or metal seats. Design & Machining by SRi. All valves tested after assembly. All part can be identified and replaced by valve serial ...
Manufactured by:SRI Instruments Europe GmbH based inBad Honnef, GERMANY
The S 8515 Vacuum Degasser is an online degasser system with high efficiency. Dissolved gases are removed from the solvents by applying vacuum to a semi-permeable ...
Manufactured by:Sud Robinetterie Industrie (SRi) based inMARSEILLE, FRANCE
Wafer ball valve saves space and weight, thanks to the absence of flange. This design also allows replacement of a gate valve without modification of the piping should a reduced bore be ...
Manufactured by:SRI France based inPierre-Bénite, FRANCE
Ultra-mobile absorbent station for spills. Compact, it is the ideal intervention kit with an all-in-one system which storage, distribution and recovery of Fibercan. ...
Manufactured by:Sud Robinetterie Industrie (SRi) based inMARSEILLE, FRANCE
When the expected service or design temperature is out of the standard temperature range of SRi ball valve, SRi manufactures high temperature or cryogenic ball valves. The minimum temperature of cryogenic ball valve is -196°C. The maximum temperature of high temperature ball valve is +450°C for TCC (Tungsten Carbide Coating) and +650°C for CCC (Chromium Carbine ...
Manufactured by:Sud Robinetterie Industrie (SRi) based inMARSEILLE, FRANCE
Double Block and Bleed (DBB) ball valve is made of two balls in one valve body. A bleeder is added between the two balls of the valve. This system is equivalent to a Double Isolation Bleed (DIB) single ball ...
Manufactured by:Sud Robinetterie Industrie (SRi) based inMARSEILLE, FRANCE
SRi tandem ball valve is constituted by two balls, like the Double Block and Bleed ball valve, but the face-to-face dimension is in accordance with ASME B16.10. On site, a SRi tandem ball valve can replace a single ball valve without modification of the pipe meaning two ball valves instead of only ...
Manufactured by:SRI France based inPierre-Bénite, FRANCE
The biological parts washer cleans your parts without solvent, while respecting operator’s health and the environment. These parts washers are heated at 38°C in order to ensure an optimal cleaning process by being through the brush, the soaking or the sprinkle. Manufactured in a single block, ergonomically designed for the comfort of the operator. Increase you productivity and save time ...
Manufactured by:SRI France based inPierre-Bénite, FRANCE
The Ocean Coral cleans your parts without solvent, while respecting operators’health and the environment. It cleans machine parts or brake mechanisms without using solvents and avoids dust ...
Manufactured by:SRI Instruments Europe GmbH based inBad Honnef, GERMANY
The SRI Heated Flash Vaporization injector is useful for applications that require flash vaporization of the sample before the column, such as desorption of SPME fibers or injection of extremely dirty samples where the non-volatile residue must be trapped in the injection ...
Manufactured by:Sud Robinetterie Industrie (SRi) based inMARSEILLE, FRANCE
Valves are designed to work with the full differential pressure of their class, whatever the DN. ...
Manufactured by:SRI Instruments Europe GmbH based inBad Honnef, GERMANY
The S 5120 Column Oven is a contact heat transfer oven for high-temperature stability and accuracy. The columns are mounted inside the column oven in an optimized column holder which encloses the complete column to get the best temperature transfer between the heater and the column. Up to three 350 mm columns can be mounted at the same ...
Manufactured by:Sud Robinetterie Industrie (SRi) based inMARSEILLE, FRANCE
Double Block and Bleed (DBB) ball valve is made of two balls in one valve body. A bleeder is added between the two balls of the valve. This system is equivalent to a Double Isolation Bleed (DIB) single ball ...
Manufactured by:SRI Instruments Europe GmbH based inBad Honnef, GERMANY
The S 9425/S 9430/S 9432 HPLC Pump System is a highly adaptable and potent HPLC solvent delivery system. It is one of the most adaptable pump systems on the market thanks to its modular design. Isocratic or Quaternary Gradient Pump for S 9425/S 9430 and a Binary High-Pressure Gradient Pump S 9432 are the conceivable ...
Manufactured by:SRI France based inPierre-Bénite, FRANCE
Ultra-mobile absorbent station for spills. The recycling unit allows to separate the saturated absorbent from the absorbent that can be used again. It is designed to be exclusively used with the Fibercan absorbent refills for an instantaneous ...
Manufactured by:Sud Robinetterie Industrie (SRi) based inMARSEILLE, FRANCE
The side-entry ball valve is the most common and popular design. Given its great modularity, SRi can manufacture any side-entry ball valves with special options. In case of maintenance operation, all parts of the valve can be replaced, so valve lifetime is ...
Manufactured by:Sud Robinetterie Industrie (SRi) based inMARSEILLE, FRANCE
The cover of top-entry ball valve can be disassembled from the body of the valve, so all parts can be easily maintained or replaced in-line. On demand, trem, trunnion and ball can be made as a monobloc piece. This option increases the reliability of the valve. This construction allows more flexibility in customization of driving train design, allowing for example the mounting of an actuator ...
Manufactured by:Sud Robinetterie Industrie (SRi) based inMARSEILLE, FRANCE
SRi multiways ball valve can be made, on demand, with L-port, T-port or X-port. Ball valve can be designed as transflow or non-transflow. The non-transflow avoids connection of 3 or 4 branches during stroke. The SRi multiways ball valve keeps the valve tight even if the automatic cavity relief by seat leakage is ...
Manufactured by:Sud Robinetterie Industrie (SRi) based inMARSEILLE, FRANCE
SRi pig launcher (or receiver) is safe and much more compact than a pig trap. Manual or automatic secured access door. The pig launcher can be equipped with an optional by-pass to allow flow between both sides of the valve if the pig is presented in the valve ...
Manufactured by:SRI Instruments Europe GmbH based inBad Honnef, GERMANY
The CCD is about as sensitive as a TCD, but it has the hydrocarbon selectivity of an FID while capable of operating on air alone. Because the CCD needs no compressed gases like hydrogen or helium, it can be used in SRI’s Gas-lessTM GCs where a built-in, ″whisper quiet″ air compressor supplies the ambient air carrier gas. The CCD can also be used as a hydrocarbon monitor in ...