- Home
- Equipment
Refine by
Sunco Environmental Equipment & Supplies
12 equipment items found
Manufactured by:Sunco Powder Systems based inLancaster, SOUTH CAROLINA (USA)
The Sunco Blow-Through Rotary Valve is an extension of our Drop-Through Rotary Valve and is designed for use in the Pneumatic Conveying Industry. The unique design of the Blow-Through Rotary Valve allows you to introduce high pressure conveying air through the valve body and rotor pockets, which ensures a high efficiency throughput with a low effective pressure drop. This is achieved by more ...
Manufactured by:Sunco Powder Systems based inLancaster, SOUTH CAROLINA (USA)
The Sunco Rectangular Rotary Valve Series is designed for unique applications where a special inlet and discharge is needed, instead of the industry standard round and square flanges, the Sunco Rectangular Series offers over 25 unique inlet/discharge ...
Manufactured by:Zhengzhou Sunco Machinery Co., Ltd. based inZhengzhou City, CHINA
Slag dryer also named slag drying machine Raw Slag dryer is ideal drying machine for the big moisture and high density materials such as blast furnace slag, limestone, clay, sand, etc The dried slag can be used into cement ...
Manufactured by:Sunco Powder Systems based inLancaster, SOUTH CAROLINA (USA)
Rotary Valves or Rotary Airlocks are regulate the flow of material from one chamber to another while maintaining a good airlock condition. Common uses include at the discharge of dust collectors, storage bins and pneumatic conveying applications. Sunco Rotary Airlocks can accommodate pressure differentials up to 20 psi and tepmeratures to 750º F (utilizing special high temperature ...
Manufactured by:Sunco Powder Systems based inLancaster, SOUTH CAROLINA (USA)
The Sunco Dust Collector Valve is a low-cost solution designed for light duty dust collector applications. This valve offers a tremendous cost savings over our heavy duty series. To keep costs low, the Dust Collector Valve is only available in the configurations listed below. It is also designed for maximum temperatures of 150° F and pressure differentials of 4 psi or ...
Manufactured by:Sunco Powder Systems based inLancaster, SOUTH CAROLINA (USA)
Sunco Knife Gate Valves are available in wide range of constructions and sizes. Our most common Knife Gate has a solid one-piece cast body, with integrally cast gate jams and guides. They are full port and designed with blow out proof packing glands and nylock locking nuts. We have over 1,000 Knife Gate Valves in stock with multiple models to choose from. Available types of actuation include ...
Manufactured by:Sunco Powder Systems based inLancaster, SOUTH CAROLINA (USA)
The Sunco Gravity Diverter is used to reroute material from one load point to two (2-Way Diverter) or three (3-Way Diverter) other directions. It is designed for use on applications where little or no pressure or vacuum is present. The standard divert angles are 0° x 30° or 30° x 30° (2-Way) and 30° x 0° x 30° (3-Way). However special divert angles are available to ...
Manufactured by:Sunco Powder Systems based inLancaster, SOUTH CAROLINA (USA)
The Sunco Conveying Diverter is commonly used on pneumatic conveying applications to reroute material from one load point to two discharge points. The standard divert angle is 0° x 22.5. However additional divert angles, such as 0° x 30°, can be supplied upon request. The Conveying Diverter Valve consists of a robust body manufactured in two sections, split at the center flange for ...
Manufactured by:Sunco Powder Systems based inLancaster, SOUTH CAROLINA (USA)
The Sunco Plug Diverter Valve is used on applications where a typical flap diverter valve cannot be used due to high pressures and/or abrasive materials. The Plug Diverter is ideal for high vacuum conveying systems or applications were leakage cannot be tolerated. The Plug Diverter consists of a robust cast body which houses a cast plug between a pair of end covers. The material being handled ...
Manufactured by:Zhengzhou Sunco Machinery Co., Ltd. based inZhengzhou City, CHINA
Dry Mortar Mixer Machine is key euipment for producing dry mortar, and its special design can mix the materials such as sand, fibre, cement, etc sufficiently Dry Mortar Mixer Machine also is called dry powder mixing ...
Manufactured by:Sunco Powder Systems based inLancaster, SOUTH CAROLINA (USA)
The Sunco Offset Rotary Valve is designed to handle certain types of materials that would otherwise suffer damage when handled with a typical rotary valve. Materials such as plastic pellets, nylon, polyethylene and others can break apart and the resulting “stringers” can cause a standard rotary valve to jam. This can cause material loss as well as significant downtime and increased ...
Manufactured by:Zhengzhou Sunco Machinery Co., Ltd. based inZhengzhou City, CHINA
Linear Vibrating Screen also is called Linear Vibrating Sieve. It is suitable for screening powder, granular material with size up to 325 ...