- Home
- Equipment
Refine by
Tmc Environmental Equipment & Supplies
16 equipment items found
Manufactured by:Technical Manufacturing Corporation (TMC) based inPeabody, MASSACHUSETTS (USA)
Micro-g optical table support systems are an ideal match for our CleanTop optical tables and breadboards. A wide range of configuration options, including height, weight capacity, and vibration isolation performance, are available. Most tops are best supported by a 4-post system with tie-bars, however for those longer than 10 ft (3 m) we recommend a 6-post system. In addition to the higher weight ...
Manufactured by:TMC Fluid Systems, Inc. based inTustin, CALIFORNIA (USA)
TMCFS offers belt-driven and direct-coupled Centrifugal Blowers and Centrifugal Fans for pressure and vacuum duty ...
Manufactured by:TMC Fluid Systems, Inc. based inTustin, CALIFORNIA (USA)
Regenerative Blowers are designed based on the regenerative principle. The impeller blades passing the inlet port of the blower draw air (or other gasses) in the the blower. The impeller blades then, using centrifugal action, speed up the air outward and forward. This is where the regenerative principle takes into effect. Each regeneration imparts more pressure to the air. When the air reaches a ...
Manufactured by:TMC Fluid Systems, Inc. based inTustin, CALIFORNIA (USA)
Multistage Centrifugal Blower, as the name implies, comes in multiple stages ranges from one (1) stage to a combination of stages. One stage of a multistage centrifugal blower is generally made ...
Manufactured by:TMC Fluid Systems, Inc. based inTustin, CALIFORNIA (USA)
In recent years, the need for a blower to delivery larger flow rates at higher differential pressure has become an essential requirement in many ...
Manufactured by:TMC Fluid Systems, Inc. based inTustin, CALIFORNIA (USA)
A complete range of Tri-Lobe Blowers are available for flow rates from 6-cfm (10-m3/hr) through to approximately 9,000-cfm (15,000-m3/hr) in a single stage arrangement and up to any capacity in parallel configurations. These Tri-Lobe Blowers are ideally suited for working pressures of up to 14.2-psi (1-kg/cm2). Tri-Lobe Blowers are available as total package units, ready to install or as bare ...
Manufactured by:TMC Fluid Systems, Inc. based inTustin, CALIFORNIA (USA)
A complete range of standard Air Blowers are available. Flow rates range between 15-cfm (approx. 25-m3/hr) through 6,000-cfm (10,000-m3/hr) in single stage and up to any capacity in parallel configuration for working pressure range up to 14-psi (approx. ...
Manufactured by:Technical Manufacturing Corporation (TMC) based inPeabody, MASSACHUSETTS (USA)
TMC pneumatic vibration isolation systems are the solution of choice for tool designers seeking superior vibration isolation of ultra-precision instruments. TMC now offers our industry standard Gimbal Piston®, MaxDamp®, and UltraDamp™ isolators in a convenient range of capacities, damping levels and leveling versions to suit a wide-range of applications. Ideal for OEM applications, ...
Manufactured by:Technical Manufacturing Corporation (TMC) based inPeabody, MASSACHUSETTS (USA)
Electro-Damp is the first commercial active vibration isolation system designed specifically to increase throughput, resolution, and yield in semiconductor manufacturing applications. The Electro-Damp II is a complete redesign of the original system, adding modularity, digital control, feedforward, high-force/high-clearance actuators, and multiple digital user interfaces specifically designed for ...
Manufactured by:TMC Fluid Systems, Inc. based inTustin, CALIFORNIA (USA)
Dry Vacuum Pumps are the newest development in the vacuum pump industry. They offer a number of advantages over the traditional vacuum pump designs. There is in contact “NO OIL / NO WATER” with the process vapours, therefore they are considered extremely environment ...
Manufactured by:TMC Cancela based inTordoia, SPAIN
Starting a project from scratch simply means that everything is to be done. Our stone crushers are designed to satisfy the most demanding customers. Always looking for the impacting design and the most advanced quality in the materials and components used for manufacturing as a basis, the TX range manages to break all the rules and exceed the expectations of our customers related to the finish ...
Manufactured by:TMC Fluid Systems, Inc. based inTustin, CALIFORNIA (USA)
TMC Fluid Systems manufactures air knives in both Aluminum and Stainless Steel. The "XJ" type High-Efficiency Aluminum AirKnife and the "XJS" type High-Efficiency Stainless Steel AirKnife are engineered and manufactured to provide maximum efficiency. These AirKnives come standard in 3" diameter and 4" diameter inlets. For certain applications, due to design requirements or space contraints, we ...
Manufactured by:Technical Manufacturing Corporation (TMC) based inPeabody, MASSACHUSETTS (USA)
PEPS II improves and builds upon TMC’s patented PEPS® (Precision Electronic Positioning System). With the addition of a new digital controller, PEPS® II is easier to use, offers more features, and has an improved user interface. PEPS® II is a digital non-contacting, height control system for TMC pneumatic vibration isolation systems. Such systems normally incorporate mechanical ...
Manufactured by:TMC Fluid Systems, Inc. based inTustin, CALIFORNIA (USA)
A sliding vane compressor is a rotary type compressor. What that means is that it is a rotating device that is used to compress gas. In other words, a rotary vane compressor is a machine that forces air or explosive gas (flammable gas or combustive gas) through spinning blades to create compressed gas. This dense air/gas machine is normally used to produce continuous mechanical energy. ...
Manufactured by:TMC Cancela based inTordoia, SPAIN
Starting a project from scratch simply means that everything is to be done. Our stone crushers are designed to satisfy the most demanding customers. Always looking for the impacting design and the most advanced quality in the materials and components used for manufacturing as a basis, the TX range manages to break all the rules and exceed the expectations of our customers related to the finish ...
Manufactured by:Technical Manufacturing Corporation (TMC) based inPeabody, MASSACHUSETTS (USA)
TMC's optical tables and isolation systems offer industry-leading performance and rigidity thanks to an all-steel construction and the highest core density and smallest honeycomb cell area on the ...