- Home
- Equipment
Refine by
Waterra Environmental Equipment & Supplies
16 equipment items found
Manufactured by:Waterra USA Inc. based inPeshastin, WASHINGTON (USA)
The WS-2 line of Water Level Sensors use tough, plastic reels to protect the stainless steel tape from damage and dirt while the tape is stored on the reel. They are made from black polyethylene and their lightweight and slim profile make them very portable. The WS-2 Open Reel is available with tapes in metric units of 30, 50, 75, 100, 200, 300 or 500 meters or 100 or 250 feet. ...
Manufactured by:Waterra USA Inc. based inPeshastin, WASHINGTON (USA)
Micro Flow System: < ½ gpm & max 75 feet – drive points - (< 2 lpm & 23 m). ...
Manufactured by:Waterra USA Inc. based inPeshastin, WASHINGTON (USA)
This WSP-12V-1 pump (Cyclone) is capable of lifting up to 25 feet (8 m) by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells. If you want speed control, then you will need a PA-10800 ...
Manufactured by:Environmental Test Products, Inc. based inJaffrey, NEW HAMPSHIRE (USA)
HS-2 Waterra Oil – Water Interface Sensors utilize sophisticated ultrasonic sensors to help detect a broad range of hydrocarbon products in monitoring wells. A 5/8 inch stainless steel probe is attached to 100 foot and 250 foot open reels or a 100 foot closed reel option is available. The well tapes are polyethylene coated stainless steel tapes that are graduated in 1/100 of a ...
Manufactured by:Waterra USA Inc. based inPeshastin, WASHINGTON (USA)
Waterra eDNA Filters are manufactured in our clean room facility in Calgary, Alberta, Canada. Each filter is individually bagged with two end caps to contain a buffer for sample preservation. Filter media is available in 5 different pore sizes from 0.1 to 5 micron and offered in 300 and 600 square centimetre ...
Manufactured by:Waterra USA Inc. based inPeshastin, WASHINGTON (USA)
The Waterra Lever Arm – Tubing Actuator is a manual lever designed to provide operators with a convenient, portable mechanism which would provide some mechanical advantage when manually operating the Waterra Pump as well as facilitating the collection of samples with this ...
Manufactured by:Waterra USA Inc. based inPeshastin, WASHINGTON (USA)
The Hydrolift is a portable, electrically operated device that is used to automate the operation of the Waterra Pump System. The Hydrolift is powered by a 3/4 horsepower (560 watts) electric motor (available in either 110 volt or 220 volt) and generates a 4 inch (10 cm) stroke at up to 140 cycles per minute. The Hydrolift weighs about 35 pounds (16 kg) and requires an electrical power supply of ...
Manufactured by:Waterra USA Inc. based inPeshastin, WASHINGTON (USA)
Waterra carries the Fieldpro Peristaltic Groundwater Sampling Pump because it is quite easy to use but peristaltic pump lift is more limited than other devices. They work by reducing the pressure in the sample tubing. Water rises up the tubing to equalize the pressure differential because the bottom end of the tube is open. The maximum theoretical vacuum that a peristaltic pump can create is -1 ...
Manufactured by:Hoskin Scientific Limited based inBurnaby, BRITISH COLUMBIA (CANADA)
The Spectra Scientific Field ProTM III is the leading Professional Grade Peristaltic Pump on the market. Built upon 20 years of continuous design improvements the Field Pro is the only Peristaltic Pump in the market to have three different versions with each being an improvement over the previous. The current Spectra Field Pro III is an award winning pump sold all over the world. The top angled ...
Manufactured by:Spectra Scientific, Inc. based inMississauga, ONTARIO (CANADA)
Waterra brand bailers offered in varrying ...
Manufactured by:Spectra Scientific, Inc. based inMississauga, ONTARIO (CANADA)
Waterra Surge Blocks for low flow sampling ...
Manufactured by:Spectra Scientific, Inc. based inMississauga, ONTARIO (CANADA)
The Waterra Hydrolift is designed for well remediation and development. The purging capabilities of the Hydrolift reach 150-200 feet (45m-60m). The Hydrolift comes with a generator. For exact purging requirements we ask that you contact us directly to ensure you receive the best product for your needs. ...
Manufactured by:Spectra Scientific, Inc. based inMississauga, ONTARIO (CANADA)
Waterra brand groundwater filters offered in high and medium ...
Manufactured by:Environmental Test Products, Inc. based inJaffrey, NEW HAMPSHIRE (USA)
Waterra Water Level Indicators / Sensors are 5/8 inch ( 1.6 cm ) diameter 316 stainless steel probes attached to graduated tapes. The dog bone design prevents adherence to wet surfaces such as well casings.Waterra Water Level Indicators / Sensors are available in open or closed reel configurations.The 3/8″ stainless steel flat tape tapes are Polyethylene coated and graduated to the nearest ...
Manufactured by:Waterra USA Inc. based inPeshastin, WASHINGTON (USA)
We manufacture inline disposable filters in our clean room facility in Calgary, Alberta, Canada. Most popular are FHT-45 Waterra 0.45 micron Groundwater Filters used in metal analysis in groundwater monitoring programs all around the world. Their job is to remove the suspended particulate from groundwater samples so the dissolved metal content can be determined. also available are 0.1, 0.22, 1 ...
Manufactured by:Waterra USA Inc. based inPeshastin, WASHINGTON (USA)
The HS-2 line of Oil-Water Interface Sensors use tough, plastic reels to protect the stainless steel tape from damage and dirt while the tape is stored on the reel. They are made from black polyethylene and their lightweight and slim profile make them very portable. The HS-2 Open Reel is available with tapes in metric units of 30, 50, 75, 100, 200, 300 or 500 meters or 100 or 250 feet. ...