- Home
- Equipment
Refine by
Campbell Scientific Environmental Equipment & Supplies
21 equipment items found
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The 014A, manufactured by Met One, is a three-cup anemometer that monitors wind speed for the range of 0 to 45 m/s with a threshold of 0.45 m/s. You connect the 014A directly to a Campbell Scientific data logger, which measures the anemometer's pulse signal and converts the signal to engineering units (mph, m/s, ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The P2546D, manufactured by WINDSENSOR, is a Class 1 cup anemometer commonly used in wind resource assessment and power performance applications. Each anemometer is individually calibrated compliant with IEC 61400-12-1 and is shipped with a MEASNET calibration certificate. The P2546D features permanent magnets mounted on the shaft that activate an electronic switching current. In response, this ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The P2546C, manufactured by WINDSENSOR, is a Class 1 cup anemometer commonly used in wind resource assessment and power performance applications. Each anemometer is individually calibrated compliant with IEC 61400-12-1 and is shipped with a MEASNET calibration certificate. The P2546C features a durable construction and is suitable for both on-shore and off-shore environments. The “C” ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The CS475A radar sensor monitors the water level of rivers, lakes, tidal seas, and reservoirs. The sensor is ideal for areas where submersed sensors can be damaged due to corrosion, contamination, flood-related debris, lightning, or vandalism. It emits short microwave pulses and then measures the elapsed time between the emission and return of the pulses. The elapsed time measurement is used to ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The SR50A Sonic Distance Sensor provides a non-contact method for determining snow depth. It determines depth by emitting an ultrasonic pulse and then measuring the elapsed time between the emission and return of the pulse. An air temperature measurement is required to correct for variations of the speed of sound in ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The SR50AH Heated Sonic Distance Sensor provides a non-contact method for determining snow depth. It determines depth by emitting an ultrasonic pulse and then measuring the elapsed time between the emission and return of the pulse. An air temperature measurement is required to correct for variations of the speed of sound in air. The SR50AH includes an integrated heater that prevents ice and rime ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The MetSENS600 compact weather sensor measures wind speed and direction via an ultrasonic sensor, as well as air temperature, relative humidity, and barometric pressure, in a single, combined instrument mounted inside three double-louvered, naturally aspirated radiation shields with no moving parts. An optical precipitation sensing element senses fine amounts of water. An integrated electronic ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The MetSENS200 compact weather sensor measures wind speed and direction via an ultrasonic sensor. An integrated electronic compass allows the MetSENS200 to provide accurate, relative wind direction measurements without being oriented in a particular way, making installation easier. WMO average wind speed and direction and gust data are provided. The MetSENS200 is compatible and easily integrated ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The CS526 isolated pH probe makes reliable, accurate pH measurements in aqueous solutions. It can be submersed or inserted into tanks, pipelines, and open channels. This probe has a serial, TTL output that represents a 2 to 12 pH ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The KH20 is a highly sensitive hygrometer designed for measurement of rapid fluctuations in atmospheric water vapor, not absolute concentrations. It is typically used together with a CSAT3B in eddy-covariance ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The CC5MPXWD is similar to the CC5MPX, except it includes an internal defroster that prevents and removes light frost and icing from the camera's window. This high-resolution digital camera produces JPG images with a resolution of up to 5 megapixels, and shoots videos with a resolution of up to 720P. It has an integrated environmentally sealed enclosure that protects the camera from moisture and ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The MetSENS550 compact weather sensor measures wind speed and direction via an ultrasonic sensor, as well as air temperature, relative humidity, and barometric pressure, in a single, combined instrument mounted inside three double-louvered, naturally aspirated radiation shields with no moving parts. An integrated side connector allows users to connect a tipping bucket rain gauge. An integrated ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The 024A, manufactured by Met One, is a wind vane that measures wind direction only. You can use it in tandem with the 014A Wind Speed Sensor; however, this combination has been largely replaced by the 034B, which monitors both wind speed and wind ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The P2546A, manufactured by WINDSENSOR, is a Class 1 anemometer often used for wind speed resource assessment and wind turbine power performance monitoring. Wind speed is sensed by a three-cup rotor assembly. Magnets mounted on the shaft cause a switch to close and open two times per revolution. Our data loggers measure the switch closure and convert the signal to engineering units (mph, m/s, ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The A100LK is an anemometer suitable for your general meteorology applications and wind-energy surveys. Its low power consumption and wide power-supply range make it popular for remote locations with no access to ac power, and its pulse/frequency signal is ideal for use with Campbell Scientific data loggers. The sensor is constructed from anodized aluminum alloys, stainless steel, and ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The 034B, manufactured by Met One, combines a three-cup anemometer and vane into a single integrated package to measure wind speed and direction. It is cabled for use with our data loggers, and it can provide you with measurements for a variety of ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The CS11 detects and measures the ac current along an electrical wire using the magnetic field that is generated by that current. The sensor outputs a millivolt signal allowing it to be directly connected to our data ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The SR50AT-L is an acoustic distance sensor that measures the elapsed time between emission and return of an ultrasonic pulse. This measurement can be used to determine snow depth. The SR50AT-L includes an external temperature sensor and outputs a temperature-corrected distance reading, eliminating the need for further post-processing. Note: Campbell Scientific recommends model SR50AT-316SS-L for ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The MetSENS500 compact weather sensor measures wind speed and direction via an ultrasonic sensor, as well as air temperature, relative humidity, and barometric pressure, in a single, combined instrument mounted inside three double-louvered, naturally aspirated radiation shields with no moving parts. An integrated electronic compass provides apparent wind measurements. WMO average wind speed and ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The MetSENS300 compact weather sensor measures air temperature, relative humidity, and barometric pressure in a single, combined instrument mounted inside three double-louvered, naturally aspirated radiation shields with no moving parts. Temperature, relative humidity, barometric pressure, absolute humidity, air density, and wet bulb temperature data are provided. The MetSENS300 is compatible and ...