- Home
- Equipment
Refine by
Da Environmental Equipment & Supplies
40 equipment items found
Manufactured by:Fol-Da-Tank based inMilan, ILLINOIS (USA)
Fol-Da-Tank Ground ...
Manufactured by:ICP DAS USA, Inc. based inHouston, TEXAS (USA)
This is a din rail mounting bracket clip for the NS-205 and 7000 series products. Securely fasten your NS-205 to a din rail with this inexpensive accessory. You can also piggy back the 7000 modules on top of each other with this din rail ...
Manufactured by:ICP DAS USA, Inc. based inHouston, TEXAS (USA)
USB to Bluetooth LE Converter. Comes with a Windows Driver and Supports up to 3 Connections. Wireless Transmission is up to 20 Meters (65 ...
Manufactured by:Dust-A-Side Pty Ltd based inCenturion, SOUTH AFRICA
DASProduct is the ultimate solution for dust control and haul road management. To optimise production and hauling at the lowest life-cycle cost, DASProduct remains the product of choice. As the flagship of Dust-A-Side, the principal ingredient in the DASProduct is an emulsified bitumen, that has been applied with great success within the mining industry, forestry, and quarries globally for more ...
Manufactured by:Fol-Da-Tank based inMilan, ILLINOIS (USA)
Protects tank bottoms from excessive wear, abrasion, and punctures so tank life is increased and the tank stays cleaner. Heavy duty 22 oz. red or yellow hypalon, 22 oz. red or yellowvinyl,or 30 oz. orange vinyl. All seams are heat sealed for longer life. Available in the same sizes as all Fol-Da-Tanks and Self-Supporting ...
Manufactured by:Global Analyzer Systems Limited based inCalgary, ALBERTA (CANADA)
A Data Acquisition and Control system (DAS) is the heart of today’s modern CEM System. It is one of the core components that create a successful monitoring system package. The data acquisition system is the bridge between raw analyzer outputs and quality assured reportable ...
Manufactured by:Fol-Da-Tank based inMilan, ILLINOIS (USA)
The self-supporting frameless portable water tanks have been designed to meet the most stringent requirements of rural/urban fire fighting. Problems with inadequate or unusable supplies of water are eliminated by the use of open top self-supporting portable water tanks. In remote areas the self-supporting tanks are designed for standby water containment, water shuttling situations and provide a ...
Manufactured by:Fol-Da-Tank based inMilan, ILLINOIS (USA)
(6,000 gallon model shown with helicopter snorkel). Forest Service Model. High Sides. Agricultural/Industrial. Shuttle and ...
Manufactured by:Fol-Da-Tank based inMilan, ILLINOIS (USA)
Flanges are provided on all self-supporting tanks and all Quick-Assemble series tanks. When no longer in use, the SST may be quickly drained through a flange coupling on the side. All self-supporting tanks have reinforced heat sealed patches around the aluminum flange. The flanges are made from high quality al-mag alloy which provides top quality castings and threads. The flanges can also be ...
Manufactured by:Fol-Da-Tank based inMilan, ILLINOIS (USA)
For general repair of tanks. Material types: 22 oz. HPR™ High Performance Rubber, 22 oz. vinyl, 30 oz. vinyl and ...
Manufactured by:Fol-Da-Tank based inMilan, ILLINOIS (USA)
This blivet is ideal for transporting water to remote areas. When attached to a mini pump it gives fire fighters the ability to put out burning duff. (GSA ...
Manufactured by:Fol-Da-Tank based inMilan, ILLINOIS (USA)
The Single Lane Tank® facilitates maximum flow rates for water AND water tender traffic. Two or more of our SLT® 2000 tanks will give you maximum capacity on the ground without affecting the opposite lane of traffic. The SLT® is a must for narrow rural roads having little or no shoulder! The SLT® comes in various frames and liner fabrics. Frame sizes are 8'x14'x29" with steel ...
Manufactured by:DAS Environmental Expert GmbH based inDresden, GERMANY
All ESCAPE systems have a small footprint with service and maintenance access from the front and back. Installation is quick and easy and does not require specialised equipment. Operation costs and general safety can be optimised with a process tool interface. ...
Manufactured by:Dynamic Aqua Science, Inc. (DAS) based inKirkland, ARIZONA (USA)
The Moving Bed Bio Media is made of Polyethylene Borealis Quality. The AMB Bio Media provided by us is self cleaning and enables excellent surface ratio. The bio-film carrier elements are produced from a material and with a procedure that provided properly stored and used ensures a minimum aging time of 20 years. Our Bio Media can also be used as packing media for water coolers, oil water ...
Manufactured by:ICP DAS USA, Inc. based inHouston, TEXAS (USA)
Intelligent Communication Controller with one RS-485 port and one RS-232/RS-485 port ...
Manufactured by:ICP DAS USA, Inc. based inHouston, TEXAS (USA)
The PCI-P8R8 provides 8 optically isolated inputs and 8 relay outputs. The PCI-P8R8 has two 37-pin D-Sub connectors. It can be installed in a 5V PCI slot and can support true "Plug & ...
Manufactured by:ICP DAS USA, Inc. based inHouston, TEXAS (USA)
GW-2139M is a network gateway that enables Modbus TCP client devices to access a BACnet MS/TP network as a BACnet MS/TP ...
Manufactured by:Da/Pro Rubber Inc. based inBroken Arrow, OKLAHOMA (USA)
Our engineering expertise can point you to the right choice of gaskets design for your flow parameters. Da/Pro Rubber gaskets are custom manufactured to our customer's specifications. Our in-house chemists and engineers have years of experience mixing and modifying custom designs to increase the efficiency of the overall ...
Manufactured by:Fol-Da-Tank based inMilan, ILLINOIS (USA)
Fol-Da-Tank has been manufacturing salvage covers for over 30 years and has unmatching quality and durability. The 10 oz. vinyl fabric is NFPA 701 and California Fire Marshall CPAI-84 approved for flame retardancy. Our 18 oz., 22 oz., 30 oz. vinyl and HPR (HIgh Performance Rubber) are also flame resistant and has heavy duty rip stop properties. ...
Manufactured by:Yixing Bluwat Chemicals Co., Ltd. based inYixing, CHINA
PolyDADMAC technical name is Polydimethyl-Dialkelen-Amrnonium Chloride, it is cationic polymer and it can be completely dissolved in ...