- Home
- Equipment
Refine by
Dct Environmental Equipment & Supplies
14 equipment items found
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
Contrary to the industrial pressure transmitter with analog signal, DCT 532 has a digital i²C-interface. i²C has a master-slave topology, whereby you can use up to 127 devices at one master. Due to the usage of high quality materials and components, DCT 532 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. The modular concept of the pressure ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
DCT 531i is characterized by very good accuracy and excellent temperature behaviour and is ideally suited for applications where precise pressure measurement is necessary. Thanks to the integrated RS485 interface (based on the MODBUS RTU protocol), reliable and robust data transmission is available, which also works without problems over longer distances. Since the DCT 531i works directly with a ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The industrial pressure transmitter DCT 541 was especially developed for hydrogen applications and can also be used with other technical gases (e.g. oxygen) and uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be requested by a master. For ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The pressure transmitter DCT 571 was developed for applications in plant and mechanical engineering or in laboratory technology, e.g. designed to measure pressures or levels of pasty, contaminated or aggressive media. The self-developed pressure sensor made of 99.9% pure ceramic is characterized by a high overload capacity, as well as temperature and media resistance. The integrated RS 485 ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The pressure transmitter DCT 553P is used in the food and pharmaceutical industries or in applications where a dead space-free process connection is required. A capacitive ceramic pressure sensor developed in-house is used as the basic sensor, which is characterized by a high overload and excellent surface quality. The special design prevents the formation of condensation inside the pressure ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
DCT 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data will transfer in binary form. Due to the usage of high quality materials and components, DCT 531 is suitable for almost ...
Premium
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The sensor technology of the DCT 533 is the same as those of the proven pressure transmitter DMP 331 / DMP 333, whereby the DCT 533 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. The modular concept of the pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 533 to different conditions ...
by:Babcock Wanson - CNIM Group based inChevilly-Larue Cedex, FRANCE
The recuperative thermal oxidation allows the air depuration by thermal oxidation at 750-800°C. The thermal recovery is done by means of an air-air heat ...
by:Babcock Wanson - CNIM Group based inChevilly-Larue Cedex, FRANCE
Catalytic oxidation is a process to treat waste air or gases. Usually traditional oxidation processes are running at temperatures higher than 750°C. In case a few organic compounds are present in the gas stream, to keep these temperatures, the incineration process needs a high quantity of additional fuel. With the catalytic oxidation the additional fuel can be saved by means of a special ...
by:Babcock Wanson - CNIM Group based inChevilly-Larue Cedex, FRANCE
This process uses water to recover high-boiling, totally soluble, solvents (ex. DMF). Mainly it is employed in the synthetic leather, textile and elastic fabrics, on polyurethane basis, production ...
by:Babcock Wanson - CNIM Group based inChevilly-Larue Cedex, FRANCE
The Regenerative thermal oxidation allows solvent oxidation by increasing the polluted air temperature over 750-800 °C with a high efficiency heat recovery system using ceramic material.Starting from 1995 till today, Donau Carbon Technologies Srl, with more than 100 combustors of this type having capacities between 5.000 and 200.000 Nm3/h, achieved very high quality and reliability levels. ...
by:Babcock Wanson - CNIM Group based inChevilly-Larue Cedex, FRANCE
Donau Carbon Technologies Srl designs and supplies complete lines for the treatment of dust and gases polluted flows. The main installations have been done for the treatment of flue gases coming from industrial process, therefore characterized by high concentration of specific pollutants.For example, Donau Carbon Technologies Srl realized plants for the treatment of flue gas produced during ...
by:Babcock Wanson - CNIM Group based inChevilly-Larue Cedex, FRANCE
DCT's innovative plant, X-CSR, is adressed to the printing ecosystem, and aims to extend solvent technology, generally adopted only by big companies, to SMEs that are using smaller ...
by:Babcock Wanson - CNIM Group based inChevilly-Larue Cedex, FRANCE
We offer different type of concentrators for the depuration of polluted air with low solvent concentration (< 1 g/m3). This technology allows to reduce of 10-15 times the flow polluted by solvent, increasing the concentration and reducing the management ...