- Home
- Equipment
Refine by
Dega Environmental Equipment & Supplies
11 equipment items found
Manufactured by:Dega CZ s.r.o. based inPrague 3, CZECH REPUBLIC
The 3rd generation control panel is designed as an independent appliance to be mounted on the wall or in exchange stations. Up to 32 transmitters can be connected to the control panel via RS485, and up to 8 transmitters can be connected via loop circuit 4 - 20 mA. The control panel evaluates 4 levels of gas leakage detected by transmitters. One flood detection sensor DEGA Zc II and one ...
Manufactured by:Dega CZ s.r.o. based inPrague 3, CZECH REPUBLIC
The external temperature sensor is used for the detection of critical temperatures in the area monitored by means of a digital sensor. The sensor can be connected to the DEGA UPA II compact ...
Manufactured by:Dega CZ s.r.o. based inPrague 3, CZECH REPUBLIC
The DEGA NSx-yL II gas transmitter – is a part of the detector that is placed in the monitored area that is designed to protect the health and property of people in a location in which a critical situation could occur through an accumulation of flammable or toxic gases. The transmitter includes a sensor that ensures sensing of the ambient air with the subsequent transfer of any actual gas ...
Manufactured by:Centec GmbH based inMaintal, GERMANY
Automated deaeration of water through the use of an efficient, stainless steel packed stripped column. For improved oxygen removal, a pre-heater can be implemented to increase the water to a maximum temperature of 72°C and thereby efficient sterilising the water as part of the deaeration ...
Manufactured by:Dega CZ s.r.o. based inPrague 3, CZECH REPUBLIC
The 3rd generation control panel is designed as an independent appliance to be mounted on the wall or in exchange stations. Up to 8 transmitters can be connected to the control panel via RS485. The control panel evaluates 4 levels of gas leakage detected by transmitters. One flood detection sensor DEGA Zc II and one temperature detection sensor DEGA Tc II can be connected to the control panel as ...
Manufactured by:Dega CZ s.r.o. based inPrague 3, CZECH REPUBLIC
DEGA PANEL S1 III The external ultra-thin LED backlit panel serves for optical signalling in the event of the exceeding of the critical concentrations of gases, on- site and in front of every entrance to the monitored area. In idle mode the panel does not display any text - the text is visible only when it is illuminated. The panels can be connected to any controller for DEGA detection ...
Manufactured by:Dega CZ s.r.o. based inPrague 3, CZECH REPUBLIC
The external flood sensor is used for the detection of flooding and it is based on the principle of the detection of the flooding of the measuring contacts by water. The sensor can be connected to the DEGA UPA II compact controller or to the DEGA05 compact ...
Manufactured by:Dega CZ s.r.o. based inPrague 3, CZECH REPUBLIC
The DEGA NSx-yL III gas transmitter – is a part of the detector that is placed in the monitored area that is designed to protect the health and property of people in a location in which a critical situation could occur through an accumulation of flammable or toxic gases. The transmitter includes a sensor that ensures sensing of the ambient air with the subsequent transfer of any actual gas ...
Manufactured by:Dega CZ s.r.o. based inPrague 3, CZECH REPUBLIC
DEGA NB III transmitter is a part of the gas detection system. Transmitter is located in monitored premises in which critical situations due to accumulation of flammable or toxic substances can occur. Transmitter converts the measured concentration of substances into a unified signal 4 - 20mA and RS485. The transmitter can be connected to control panels DEGA UPA III, DEGA UKA III and DEGA UDA ...
Manufactured by:Dega CZ s.r.o. based inPrague 3, CZECH REPUBLIC
DEGA DV III-x is used to measure leakage of ammonia into water in ducts, tanks, piping etc. The detection system of Ammonia leakage consists of the relevant DEGA DVA III-x detector, the interconnecting cable and the DEGA NZV III converter. The probe is a PH electrode in a housing adapted to be placed in a pipeline. The DEGA NZV III is located in a dry environment away from an explosive area. The ...
Manufactured by:Dega CZ s.r.o. based inPrague 3, CZECH REPUBLIC
A digital compact gas detector with a built-in sensor selected in accordance with the type of gas, including evaluation, with an LCD display showing the values measured , with an acoustic alarm and a reset button for the acoustic alarm on the control panel, provided with the function of monitoring the calibration dates and with auto-control, with the option for connecting an additional ...