- Home
- Equipment
Refine by
Designer Environmental Equipment & Supplies
55 equipment items found
by:Mold Inspection Consulting & Remediation Organization (MICRO) based inKirkland, WASHINGTON (USA)
OdorGuard 600 carbon web filters are about 1.75” deep and in sizes specifically made for OmniAire machines. They should be installed after primary/secondary filter to protect it from dust. The 60% granular activated carbon has nearly 5 million square feet of surface area per pound to provide high removal capacity and low resistance to air flow. Medium Duty – 18" x 24" x ...
Manufactured by:Turner Designs, Inc based inSan Jose, CALIFORNIA (USA)
We are very sorry to announce that after almost 20 years of manufacturing the 10AU Field Fluorometer, we are no longer able to purchase some of the parts. We are very sorry to say we can no longer build new units. We will continue to support and repair 10AUs in the foreseeable future. Due to material obsolescence we are not able to repair 10AUs built prior to January 1,1999 starting with S/N ...
Manufactured by:Global Ocean Design LLC based inSan Diego, CALIFORNIA (USA)
The Purge Port, Glass Sphere (PP-101) is designed for applications using a glass sphere housing of 10-20” OD of any wall thickness up to 23mm, and a standard clearance 7/16" D hole with a 1" spotface. The self-sealing purge port body and cap are made from corrosion resistant and ultra-strong Titanium 6-4 (Grade 5). As seagoing researchers, these have all the helpful features we want in a ...
Manufactured by:Global Ocean Design LLC based inSan Diego, CALIFORNIA (USA)
The Pressure Switch, Sphere (PAS-120) is designed for applications using a glass sphere housing of 10-20” OD of any wall thickness up to 23mm. The switch bodies are made from corrosion resistant and ultra-strong Titanium 6-4 (Grade 5). ...
Manufactured by:Global Ocean Design LLC based inSan Diego, CALIFORNIA (USA)
The Nanolander (OL-161) is a small, untethered lander for benthic operations. It is hand deployable off small boats. Extended bottom time is possible. The Nanolander carries custom or commercial payloads, including a baited drop arm, the Seabird MicroSeaCAT, a time-lapse digital camera and LED system, or the OpenCTD. Release options include the Edgetech BART acoustic release board, or ...
by:Mold Inspection Consulting & Remediation Organization (MICRO) based inKirkland, WASHINGTON (USA)
The PEROx PG air purifier is a powerful tool for fire and flood restoration projects, mold abatement and for control of VOCs, odor and bio-contaminants. The portable PEROx PG is designed to be connected by flex duct to the exhaust from OmniAire machines or to the intake side of any air mover. The PEROx purification process utilizes hydro-peroxides and oxidizer plasma, which rapidly sanitizes the ...
Manufactured by:WVO Designs based inNorth Charleston, SOUTH CAROLINA (USA)
The Raw Power Centrifuges have been a mainstay of the waste oil cleaning community for years. We’ve established ourselves as the leader with quality, delivery time and service. We are pleased to say that our centrifuges have also been widely adopted by the algae community. High School Science Clubs, University Labs and Large R&D Firms have found our centrifuges to be affordable and ...
Manufactured by:Chase Corporation based inWestwood, MASSACHUSETTS (USA)
UV 165-183 is a fast curing urethane acrylate that bonds well to a wide variety of different substrates. This product requires direct UV exposure during cure. The ability of this product to fluoresce under black light facilitates inspection of bonded assemblies for adhesive presence. Because of the variability of different UV light sources, it is suggested that the user test and specify UV ...
Manufactured by:Chase Corporation based inWestwood, MASSACHUSETTS (USA)
UV 422-7000 is a medium viscosity, fast UV curing polymer, with excellent wetting properties. UV 422-7000 is a relatively soft-polymer (shore D36), with good mechanical and thermal shock-resistance. ...
Manufactured by:Alternative Design Manufacturing & Supply, Inc. based inSiloam Springs, ARKANSAS (USA)
Halcyon Air is the new name in air handling systems. This ground breaking new product has been engineered and manufactured to meet global guidelines for maintaining a healthy rodent micro-environment within individually ventilated cages ...
Manufactured by:Airius, LLC based inLongmont, COLORADO (USA)
Our Designer Series fans are installed as a distributed network of devices to continuously provide airflow across large spaces that suffer from stratification. The Designer Series fans feature our patented stator and unique nozzle design to gently throw air over long distances for ceiling to floor air rotation all while looking good wrapped in an aluminum ...
Manufactured by:Hoskin Scientific Limited based inBurnaby, BRITISH COLUMBIA (CANADA)
Please note: Effective April 1, 2017, Cyclops-7F replaces Cyclops-7 Submersible Sensors. Cyclops-7F requires only 1 second after power up before taking measurements. As the Cyclops-7 required 5 seconds, this is a significant reduction in power required, especially if repeatedly power-cycling the sensor. All other specifications remain the same. This line of submersible sensors is designed for ...
Manufactured by:Turner Designs, Inc based inSan Jose, CALIFORNIA (USA)
The C6P™ Submersible Fluorometer includes up to six optical sensors, each configured for a specific application. Excitation/emission wavelength pairs, spanning the light spectrum from deep ultraviolet to infrared define each application. All sensors are factory set to provide excellent sensitivity and a broad range of detection. Every C6P comes with a factory-installed temperature sensor ...
Manufactured by:MeteoXperts Solutions Pvt Ltd based in, INDIA
All WMO measurement criteria are satisfied by a small anemometer and wind direction vane sensor with extremely low power consumption, lightning protection, and no dead spots. intended for NB-IoT, IoT Sigfox, IoT LoRaWAN, and wireless AWOS weather stations. The elliptical cup shape, which is ideal for most situations, delivers exceptional aerodynamics in a small, affordable form made of anodized ...
Manufactured by:Design Controls LLC based inHouston, TEXAS (USA)
ORP Sensors from Design Controls are specifically designed to be low maintenance. The sensing end has a flat surface ORP sensor, providing a long life span due to its rugged construction and its flat self-cleaning surface that does not collect suspended particles. The body is constructed of Ryton which is stronger and compatible with more chemical process ...
by:Mold Inspection Consulting & Remediation Organization (MICRO) based inKirkland, WASHINGTON (USA)
The PEROx PG-3 air purifier is a powerful tool at fire and flood restoration projects, mold abatement, and for control of VOC’s, odor and bio-contaminants. This portable unit with dual generators can safely operate in occupied areas and control odors from restoration projects as well as provide high output sterilization during the final cleanup process. The highly portable PEROx PG-3 is ...
Manufactured by:Robotics Design Inc. based inMontreal, QUEBEC (CANADA)
The ANATERGOARM AEA-50B is a heavy-duty modular ergonomic snake arm constructed of anodized aluminum. It provides a weight-free, safe and comfortable way to position and use a wide variety of heavy (50kg) pneumatic, electric and hydraulic tools. The ANATERGOARM is composed of a vertical column for the base, connected to a serial linkage of modules for the arm that fold relatively to each other to ...
Manufactured by:Robotics Design Inc. based inMontreal, QUEBEC (CANADA)
Designed and manufactured in Canada by Robotics Design Inc., the ANATROLLER ARE-100 is an advanced rugged modular mobile robotic platform based on patented ANAT Technology for educational and research laboratories. This high quality robot is made from anodized aluminum and stainless steel. The ANATROLLER ARE-100 can be customized to suit any application, depending on your needs: Four-wheel drive, ...
Manufactured by:Robotics Design Inc. based inMontreal, QUEBEC (CANADA)
The ANATROLLER™ ARI-10 is a mobile robot made for all the needs and challenges of residential duct cleaning. Robotics Design Inc. conducted extensive studies in the residential duct cleaning market to determine the needs of the market. This affordable duct cleaning solution responds to every need and challenge for a complete residential duct cleaning solution. ...
Manufactured by:Robotics Design Inc. based inMontreal, QUEBEC (CANADA)
The ANAT AME-100 robot is a modular hyper-redundant industrial manipulator by Robotics Design Inc. This advanced manipulator is made with a modular “snake-like” design with a high degree of precision in a compact, lightweight and durable anodized aluminum structure. Adjacent modules can be mechanically decoupled in seconds, facilitating maintenance and retrofitting. The innovative ...